Beijing Silk Road Enterprise Management Services Co., Ltd.
| Load Capacitance | - |
| Operating Temperature | - |
| Frequency | - |
| Description | SMD5032-4P Crystals RoHS |
| Mfr. Part # | X1H025000FK1H |
| Package | SMD5032-4P |
| Model Number | X1H025000FK1H |
View Detail Information
Explore similar products
Quartz Crystal Resonator with 25 MHz Frequency KYX K2B250001010 SMD 2.0 by 1.6
Crystal Oscillator Liming 49MD-5.1302-20-10-10/B for Automotive Applications and
Crystal oscillator 38 megahertz frequency muRata XRCGB38M400FXH17R0 suitable for
crystal oscillator CREC 01XMD122JLVF026298200 for GPS Bluetooth mobile phones
Product Specification
| Load Capacitance | - | Operating Temperature | - |
| Frequency | - | Description | SMD5032-4P Crystals RoHS |
| Mfr. Part # | X1H025000FK1H | Package | SMD5032-4P |
| Model Number | X1H025000FK1H |
The Harmony Electronics HSX531S Quartz Crystal is a high-performance frequency control component designed for various electronic applications. It offers a nominal frequency of 25.000000MHz and is manufactured with a focus on reliability and compliance with environmental standards. This crystal is Pb-free, RoHS compliant, HF-Halogen free, and REACH Compliant, making it suitable for modern electronic manufacturing processes.
| Item | Electrical Spec. | Unit | Notes | Min | Type | Max |
|---|---|---|---|---|---|---|
| Frequency (FL) | MHz | 25.000000 | ||||
| Mode of oscillation | Fundamental | |||||
| Frequency tolerance | ppm | at 253 | -30 | +30 | ||
| Equivalent resistance (RR) | SERIES | 50 | ||||
| Storage temperature range | -40 | +85 | ||||
| Operable temperature range | -10 | +60 | ||||
| Temperature stability | ppm | -10 ~ +60 | -30 | +30 | ||
| Loading capacitance (CL) | pF | 20.0 | ||||
| Drive level (DL) | W | 10 | 300 | |||
| Shunt Capacitance (C0) | pF | 7.0 | ||||
| Insulation resistance | M | at DC 100V | 500 | |||
| Aging | ppm/Year | -5 | +5 | |||
| Circuit | Measured in HP/E5100A,S&A 250B | |||||
| Dimensions (L x W) | mm | 3.6 x 1.3 | ||||
| Dimensions (Height) | mm | 1.3 | ||||
| Dimensions (Lead Pitch) | mm | 1.2 | ||||
| Inside Structure - Base Material | Ceramic Al2O3 | |||||
| Inside Structure - Lid Material | Metal Fe- Ni Co Ni Plating | |||||
| Inside Structure - Kovar Material | Metal Fe- Ni -Co | |||||
| Inside Structure - Crystal Blank Material | Quartz SiO2 Rectangular At-Cut | |||||
| Carrier Tape Width | mm | 8.0 | ||||
| Carrier Tape Pitch | mm | 4.0 | ||||
| Reel Quantity | pcs | 1000 / 3000 | ||||
| Mechanical Performance - Shock | Dropping from 100 cm height 3 times on 30 mm Concrete floor. | Refer to: JIS C 60068-2-32 | A | |||
| Mechanical Performance - Vibration | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, 2 cycles and duration of 2 hours to each direction. | Refer to: JIS C 60068-2-6/ MIL-HDBK-781A 6.5.2 | A | |||
| Mechanical Performance - Leakage Test | Leak Rate 1.0x10-9 Pa-m3/sec. Max. Measured by Helium leak detector. | Refer to: JIS C 60068-2-17 | --- | |||
| Mechanical Performance - Solder ability | After applying ROSIN Flux, dipping in solder bath at 245deg.C 5deg.C for 3 0.5 sec. | Refer to: JIS C 60068-2-20/ JIS C 60068-2-58 | B | |||
| Mechanical Performance - Bending Strength | Mount a sample on board. Apply Pressure to the center of board until it is bent to 3 mm and hold for 5 1 sec. Pressure speed: 0.5 mm/sec. | Refer to: EIAJ ET-7403/ JIS C 60068-2-21 | A | |||
| Mechanical Performance - Adhesion | Mount a sample on the circuit board. Apply pressure vertically to the side of specimen attached to the circuit board with the pressure jig. Pressure: 5N for 101 sec. | Refer to: EIAJ ET-7403 JIS C 60068-2-21 | C | |||
| Mechanical Performance - Body strength | Apply pressure to the center of body with the R0.5 pressure jig. pressure :10N for 101sec | Refer to: EIAJ ET-7403 JIS C 60068-2-21 | C | |||
| Environmental Performance - Resistance of Soldering Heat | Performing as the following reflow: | Refer to: JIS C 60068-2-58 | A | |||
| Environmental Performance - Humidity | Temperature 602, RH 90~95%, duration of 240 hours. Back to room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 60068-2-3 | A | |||
| Environmental Performance - Storage in Low Temperature | -40deg.C 2deg.C, duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 60068-2-1 | A | |||
| Environmental Performance - Storage in High Temperature | +85deg.C 2deg.C, duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 60068-2-2 | A | |||
| Environmental Performance - Thermal shock | -55deg.C 2deg.C (30min) +125deg.C 2deg.C (30min) 25 cycles. And Temperature Increasing/reducing time3mins. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 0025 | A |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!