Beijing Silk Road Enterprise Management Services Co., Ltd.
| Normal temperature Frequency Tolerance | ±15ppm |
| Frequency Stability | ±15ppm |
| Operating Temperature | -20℃~+75℃ |
| Load Capacitance | 8pF |
| Frequency | 32MHz |
| Description | 8pF SMD2520-4P Crystals RoHS |
| Mfr. Part # | X2B032000C81H-HU |
| Package | SMD2520-4P |
| Model Number | X2B032000C81H-HU |
View Detail Information
Explore similar products
Quartz Crystal Resonator with 25 MHz Frequency KYX K2B250001010 SMD 2.0 by 1.6
Crystal Oscillator Liming 49MD-5.1302-20-10-10/B for Automotive Applications and
Crystal oscillator 38 megahertz frequency muRata XRCGB38M400FXH17R0 suitable for
crystal oscillator CREC 01XMD122JLVF026298200 for GPS Bluetooth mobile phones
Product Specification
| Normal temperature Frequency Tolerance | ±15ppm | Frequency Stability | ±15ppm |
| Operating Temperature | -20℃~+75℃ | Load Capacitance | 8pF |
| Frequency | 32MHz | Description | 8pF SMD2520-4P Crystals RoHS |
| Mfr. Part # | X2B032000C81H-HU | Package | SMD2520-4P |
| Model Number | X2B032000C81H-HU |
The Harmony Electronics HSX221SA is a Quartz Crystal unit designed for electronic applications requiring precise frequency control. It features a nominal frequency of 32.000000MHz and operates as a fundamental mode oscillator. This product is Pb-free, RoHS compliant, HF-Halogen free, and REACH compliant, making it suitable for environmentally conscious manufacturing. The HSX221SA is manufactured by Harmony Electronics Corporation, with its origin in Taiwan.
| Specification | Value | Unit | Notes |
|---|---|---|---|
| Nominal Frequency | 32.000000 | MHz | |
| Mode of Oscillation | Fundamental | ||
| Frequency Tolerance | -15 to +15 | ppm | at 253 |
| Equivalent Resistance (RR) | 50 | SERIES | |
| Storage Temperature Range | -40 to +85 | ||
| Operable Temperature Range | -20 to +75 | ||
| Temperature Stability | -15 to +15 | ppm | -20 ~ +75 |
| Loading Capacitance (CL) | 8.0 | pF | |
| Drive Level (DL) | 10 to 100 | W | |
| Shunt Capacitance (C0) | 2.0 | pF | |
| Insulation Resistance | 500 | M | at DC 100V |
| Aging | -3 to +3 | ppm/Year | |
| Dimensions (L x W x H) | 2.5 x 2.0 x 0.73 | mm | Tolerance: 0.15 (for 2.5x2.0), 0.1 (for 0.73) |
| Carrier Tape Width | 8.0 | mm | 0.2 |
| Reel Quantity | 3000 | PCS / REEL | Standard Packing Quantity |
Inside Structure Components:
| Component | Material | Note |
|---|---|---|
| Base | Al2O3 | |
| Lid | Fe-Ni-Co | |
| Kovar | Fe-Ni-Co | |
| Crystal Blank | SiO2 | Rectangular At-Cut |
| Electrode | W, Ni, Au | |
| PAD | W, Ni, Au | |
| Connective Adhesive | Ag |
Mechanical Performance:
| Item | Test Method | Specifications |
|---|---|---|
| Shock | JIS C 60068-2-6 A | Dropping from 120 cm height 3 times on 30mmm Concrete Floor |
| Vibration | MIL-HDBK-781A 6.5.2/ JIS C 60068-2-6 A | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, 2 cycles and duration of 120 mins to each direction. |
| Leakage Test | --- | Leak Rate 1.0x10-9 Pa-m3/sec. Max. Measured by Helium leak detector. |
| Solder ability | JIS C 60068-2-20 B | After applying ROSIN Flux, dipping in solder bath at 245deg.C 5deg.C for 3 0.5 sec. |
| Bending Strength | EIAJ ET-7403 A | Mount a sample on board. Apply Pressure to the center of board until it is bent to 3 mm and hold for 5 1 sec. Pressure speed: 0.5 mm/sec. |
| Adhesion | EIAJ ET-7403 A | Mount a sample on the circuit board. Apply pressure vertically to the side of specimen attached to the circuit board with the pressure jig. Pressure: 5N for 101 sec. |
| Body strength | EIAJ ET-7403 A | Apply pressure to the center of body with the R0.5 pressure jig. pressure :5N for 101sec |
Environmental Performance:
| Item | Test Method | Specifications |
|---|---|---|
| Resistance of Soldering Heat | A | Performing as the following reflow: |
| Humidity | JIS C 60068-2-3 A | Temperature 60 2, RH 90~95%, Duration of 240 hours. Back to room temperature first, then in 1~2 hours, the component shall be checked. |
| Storage in Low Temperature | JIS C 60068-2-1 A | -40deg.C 2deg.C, Duration of 240 hours. Back to the room temperature first, then in 1~2 hours, the component shall be checked. |
| Storage in High Temperature | JIS C 60068-2-2 A | +85deg.C 2deg.C, Duration of 240 hours. Back to the room temperature first, then in 1~2 hours, the component shall be checked. |
| Temperature cycles | JIS C 0025 A | -40deg.C 2deg.C (30min) +85deg.C 2deg.C (30min) 25 cycles. And Temperature Increasing/reducing time3mins. Back to the room temperature first, then in 1~2 hours, the component shall be checked. |
Reflow Conditions:
Manual Solder Iron:
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!