Beijing Silk Road Enterprise Management Services Co., Ltd.
| Normal temperature Frequency Tolerance | ±10ppm |
| Frequency Stability | ±20ppm |
| Operating Temperature | -30℃~+90℃ |
| Load Capacitance | 8pF |
| Frequency | 16MHz |
| Description | 8pF SMD3225-4P Crystals RoHS |
| Mfr. Part # | X3S016000B81H-DHU |
| Package | SMD3225-4P |
| Model Number | X3S016000B81H-DHU |
View Detail Information
Explore similar products
Quartz Crystal Resonator with 25 MHz Frequency KYX K2B250001010 SMD 2.0 by 1.6
Crystal Oscillator Liming 49MD-5.1302-20-10-10/B for Automotive Applications and
Crystal oscillator 38 megahertz frequency muRata XRCGB38M400FXH17R0 suitable for
crystal oscillator CREC 01XMD122JLVF026298200 for GPS Bluetooth mobile phones
Product Specification
| Normal temperature Frequency Tolerance | ±10ppm | Frequency Stability | ±20ppm |
| Operating Temperature | -30℃~+90℃ | Load Capacitance | 8pF |
| Frequency | 16MHz | Description | 8pF SMD3225-4P Crystals RoHS |
| Mfr. Part # | X3S016000B81H-DHU | Package | SMD3225-4P |
| Model Number | X3S016000B81H-DHU |
The HSX321S Quartz Crystal from HARMONY ELECTRONICS CORP. is a high-performance frequency control component designed for various product applications. It offers precise frequency stability and reliable operation across a wide temperature range. This crystal unit is suitable for applications requiring accurate timing and oscillation, making it a key component in electronic devices.
| Specification | Value | Unit | Notes |
|---|---|---|---|
| Frequency | 16.000000 | MHz | |
| Holder Type | HSX321S | ||
| Frequency Tolerance | +/-10 | ppm | at 25C +/-3C |
| Equivalent Resistance | 50 | Ohms Max. | SERIES |
| Storage Temperature Range | -40 to +90 | C | |
| Operable Temperature Range | -30 to +90 | C | |
| Temperature Drift | +/-20 | ppm | -30C to +90C |
| Loading Capacitance (CL) | 8.0 | pF | |
| Drive Level | 10 | W | (200W Max.) |
| Shunt Capacitance | 2.0 | pF Max. | |
| Insulation Resistance | > 500 | M ohms | at DC 100V |
| Mode of Oscillation | Fundamental | ||
| Shock Test (Frequency Variation) | < +/-5 | ppm | Dropping from 120 cm height 3 times on Concrete floor |
| Shock Test (Resistance Variation) | < +/-15 % or 2 ohms max. | Dropping from 120 cm height 3 times on Concrete floor | |
| Aging | < +/-3 | ppm/Year | |
| Holder | HSX321S | Seam type | |
| Carrier Tape Material | PS Conductive | ||
| Top Tape Material | Polyester | ||
| Standard Packing Quantity | 3,000 | PCS / REEL | |
| Storage Condition (Temp.) | +40 | C Max. | |
| Storage Condition (RH) | 80 | % Max. | |
| Cover Tape Release Strength | 0.1 to 0.7 | N | Pulling direction 165 to 180, Speed 300mm/min |
| Mechanical Performance - Natural Drop | Frequency < +/-5 ppm, Resistance < +/-15% or 2 ohms max. | Dropping from 120 cm height 3 times on Concrete floor | |
| Mechanical Performance - Vibration | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis. | ||
| Mechanical Performance - Sealing Tightness | Leak Rate < 1.0x10-8 Pa-m/sec. Max. | Measured by Helium leak detector. | |
| Mechanical Performance - Solder Ability | Dipping in solder bath at 245C+/-5C for 3+/-0.5 sec. | After applying ROSIN Flux. | |
| Mechanical Performance - Substrate Bending | Apply Pressure to the center of board until it is bent to 3 mm and hold for 5 1 sec. Pressure speed :0.5 mm / sec | ||
| Mechanical Performance - Adhesion | Apply pressure vertically to the side of specimen attached to the circuit board with the pressure jig. Pressure : 5N for 101 sec | ||
| Mechanical Performance - Body Strength | Apply pressure to the center of body with the R0.5 pressure jig. pressure :10N for 101sec | ||
| Environmental Performance - Humidity | Temperature 60 +/-2 C, RH 90~95%, Duration of 240 hours. | ||
| Environmental Performance - Storage in Low Temperature | -40C +/-2C, Duration of 240 hours. | ||
| Environmental Performance - Storage in High Temperature | +85C +/-2C, Duration of 240 hours. | ||
| Environmental Performance - Temperature Cycles | -40C +/-2C (30min) +85C +/-2C (30min) 25 cycles. | ||
| Soldering Reflow Condition | Available for Lead Free Soldering | Proposed reflow condition, soldering 2 times max. | |
| Soldering Iron Condition | Bit temp.: 350 max., Time: 3sec max. , Each terminal solder a 1 time max. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!