| Normal temperature Frequency Tolerance | ±30ppm |
| Load Capacitance | 22pF |
| Frequency | 25MHz |
| Description | Crystal 25MHz ±30ppm 22pF HC-49S |
| Mfr. Part # | KUS250002230 |
| Package | HC-49S |
| Model Number | KUS250002230 |
View Detail Information
Explore similar products
Quartz Crystal Resonator with 25 MHz Frequency KYX K2B250001010 SMD 2.0 by 1.6
Crystal Oscillator Liming 49MD-5.1302-20-10-10/B for Automotive Applications and
Crystal oscillator 38 megahertz frequency muRata XRCGB38M400FXH17R0 suitable for
crystal oscillator CREC 01XMD122JLVF026298200 for GPS Bluetooth mobile phones
Product Specification
| Normal temperature Frequency Tolerance | ±30ppm | Load Capacitance | 22pF |
| Frequency | 25MHz | Description | Crystal 25MHz ±30ppm 22pF HC-49S |
| Mfr. Part # | KUS250002230 | Package | HC-49S |
| Model Number | KUS250002230 |
49US/25.000MHZ
| FUND () | |||
| S&A () | |||
| KH-1240 | |||
| -40 to +85 | |||
| 100 | W | ||
| 25.000 | MHz | ||
| (252) | 30 | ppm | |
| 20 | ppm | ||
| -20 to +70 | |||
| 22 | PF | ||
| 5 MAX | PF | ||
| 40 MAX | |||
| 500 MIN | M OHMS | DC 100V | |
| 95% Coverage by using 90/10 Solder at 245 for 5 sec. Dipping after immersion in ALPHA 611 flux for 5 sec. | 49US AT CUT | ||
| Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | |||
| 1055Hz, 12min, 1.5mm PP, X.Y.Z directions, 2 hours/each direction | Electrical characteristics shall be satisfied | ||
| : 900g tension weight for 30 sec. : 90 degree bending with 225g tension weight. | No visual damages | ||
| No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | |||
| Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. (After applying ROSIN flux) Soldering portion shall be covered in over 90% of terminals/lead-wires dipped. | |||
| Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires. | Electrical characteristics shall be satisfied | ||
| Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours. | |||
| Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours. | |||
| Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours. | |||
| Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift from low to high, high to low shall be done in 1/min. | (Refer to Fig-2) |
:
TEL0755-89315823 89315866
FAX0755-89315223
www.kaiyuexiang.com
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification:
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!