Beijing Silk Road Enterprise Management Services Co., Ltd.
| Normal temperature Frequency Tolerance | ±30ppm |
| Frequency Stability | ±20ppm |
| Operating Temperature | -20℃~+70℃ |
| Load Capacitance | 20pF |
| Frequency | 12MHz |
| Description | Crystal 12MHz ±30ppm 20pF HC-49S-SMD |
| Mfr. Part # | KBD120002030 |
| Package | HC-49S-SMD |
| Model Number | KBD120002030 |
View Detail Information
Explore similar products
Quartz Crystal Resonator with 25 MHz Frequency KYX K2B250001010 SMD 2.0 by 1.6
Crystal Oscillator Liming 49MD-5.1302-20-10-10/B for Automotive Applications and
Crystal oscillator 38 megahertz frequency muRata XRCGB38M400FXH17R0 suitable for
crystal oscillator CREC 01XMD122JLVF026298200 for GPS Bluetooth mobile phones
Product Specification
| Normal temperature Frequency Tolerance | ±30ppm | Frequency Stability | ±20ppm |
| Operating Temperature | -20℃~+70℃ | Load Capacitance | 20pF |
| Frequency | 12MHz | Description | Crystal 12MHz ±30ppm 20pF HC-49S-SMD |
| Mfr. Part # | KBD120002030 | Package | HC-49S-SMD |
| Model Number | KBD120002030 |
HC-49USSMD/12.000 MHZ
20PF/30ppm
KBD120002030
(Kaiyuexiang)
HC-49USSMD/12.000 MHZ
| Holder Type | HC-49USSMD | |
| Mode of Vibration | AT CUT | |
| Oscillation Mode | FUND S&A | |
| Test Facilities | KH-1240 | |
| Storage Temperature | -40 TO +85 | |
| Driver Level | 100W | |
| Normal Frequency | 12.000 MHz | |
| Frequency Tolerance (252) | 30ppm | |
| Temperature Stability | 20ppm | |
| Operating Temperature Range | -20 TO +70 | |
| Load Capacitance | 20 PF | |
| Motional Capacitance | 3PF MAX | |
| Shunt Capacitance | ||
| Effective Series Resistance | 80 MAX | |
| Insulation Resistance | 500M OHMS MIN at DC 100V | |
| Solderability | 95% coverage by using 90/10 sold at 245 for 5 sec. Dipping after immersion in ALPHA 611 flux for 5 sec. | |
| (Provided that measurement shall be carried out after letting it alone in the room temperature for 1 hour.) | ||
| Shock | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | |
| Vibration | Vibration Frequency: 1055Hz, Repeated Period: 12min, Full Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2hours/each direction | Electrical characteristics shall be satisfied after supplying following Vibration. |
| Strength of Terminals/Lead-Wires - Pulling | 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages after test. | Body of specimen shall be fixed. |
| Strength of Terminals/Lead-Wires - Bending | 90degree bending shall be given, being supplied 225gs tension weight. Then straightened gradually. Same bending and straightening to the opposite direction. No visual damages after test. | Body of specimen shall be fixed. (Refer to Fig-1) |
| Sealing Tightness | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | |
| Soldering Dip | Terminals/lead-wires shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth shall be 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped. | (After applying ROSIN flux) |
| Solder Heating | Electrical characteristics shall be satisfied after dipping terminals/lead-wires into solder melted tank at +35010 for 3 sec. Dipping depth shall be 2mm from edge of terminals/lead-wires. | |
| (Provided that measurement shall be carried out after letting it alone in the room temperature for 1 hour.) | ||
| Humidity | Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours. | |
| Storage in Low Temperature | Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours. | |
| Storage in High Temperature | Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours. | |
| Temperature Cycle | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift from low to high, high to low shall be done in 1/min. (Refer to Fig-2) |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!