| Normal temperature Frequency Tolerance | ±10ppm |
| Load Capacitance | 12.5pF |
| Frequency | 25MHz |
| Description | Crystal 25MHz ±10ppm 12.5pF HC-49S |
| Mfr. Part # | KUS2500012510 |
| Package | HC-49S |
| Model Number | KUS2500012510 |
View Detail Information
Explore similar products
Quartz Crystal Resonator with 25 MHz Frequency KYX K2B250001010 SMD 2.0 by 1.6
Crystal Oscillator Liming 49MD-5.1302-20-10-10/B for Automotive Applications and
Crystal oscillator 38 megahertz frequency muRata XRCGB38M400FXH17R0 suitable for
crystal oscillator CREC 01XMD122JLVF026298200 for GPS Bluetooth mobile phones
Product Specification
| Normal temperature Frequency Tolerance | ±10ppm | Load Capacitance | 12.5pF |
| Frequency | 25MHz | Description | Crystal 25MHz ±10ppm 12.5pF HC-49S |
| Mfr. Part # | KUS2500012510 | Package | HC-49S |
| Model Number | KUS2500012510 |
This specification document outlines the details for the Kaiyuexiang Quartz Crystal Resonator, model 49US/25.000MHZ. It is designed for applications requiring stable frequency generation, with precise specifications for electrical and mechanical performance.
| Parameter | Value | Unit | Notes |
|---|---|---|---|
| 1. GENERAL | |||
| HOLDER TYPE | 49US | ||
| MODE OF VIBRATION | AT CUT | ||
| OSCILLATION MODE | FUND S&A | ||
| TEST FACILITIES | KH-1240 | ||
| STORAGE TEMPERATURE | -40 to +85 | ||
| DRIVER LEVEL | 100 | W | |
| 2. ELECTRICAL PARAMETER | |||
| NORMAL FREQUENCY | 25.000 | MHz | |
| FREQUENCY TOLERANCE (252) | 10 | ppm | |
| TEMPERATURE STABILITY | 20 | ppm | |
| OPERATING TEMPERATURE RANGE | -20 to +70 | ||
| LOAD CAPACITANCE | 12.5 | PF | |
| MOTIONAL CAPACITANCE | 5 | PF MAX | |
| SHUNT CAPACITANCE | |||
| EFFECTIVE SERIES RESISTANCE | 40 | MAX | |
| INSULATION RESISTANCE | 500 | M OHMS MIN | AT DC 100V |
| 3. MECHANICAL PARAMETER | |||
| SOLDERABILITY | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | ||
| Mechanical Endurance | |||
| SHOCK | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | ||
| VIBRATION | Electrical characteristics shall be satisfied after supplying following Vibration. (VIBRATION FREQUENCY 1055Hz, REPEATED PERIOD 12min, FULL CYCLE 1.5mm PP, DIRECTION X.Y.Z, TIME 2hours/each direction) | ||
| STRENGTH OF TERMINALS/LEADWIRES (PULLING) | 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages. | ||
| STRENGTH OF TERMINALS/LEADWIRES (BENDING) | 90 degree bending shall be given, being supplied 225gs tension weight. Then straightened gradually. Opposite direction bending and straightening shall be supplied. No visual damages. | ||
| SEALING TIGHTNESS | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| SOLDERING DIP | Terminals/lead-wires shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth shall be 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped. | (After applying ROSIN flux) | |
| SOLDER HEATING | Terminals/lead-wires shall be dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth shall be 2mm from edge of terminals/lead-wires. | ||
| II ENVIRONMENTAL ENDURANCE | |||
| HUMIDITY | Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours. | ||
| STORAGE IN LOW TEMPERATURE | Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours. | ||
| STORAGE IN HIGH TEMPERATURE | Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours. | ||
| TEMPERATURE CYCLE | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift from low to high, high to low shall be done in 1/min. | (Refer to Fig-2) | |
Contact Information:
Factory Address: 4th Floor, Building 1, Caifa Industrial City, Renmin Road, Guanlan, Longhua District, Shenzhen
TEL: 0755-89315823 / 89315866
FAX: 0755-89315223
Website: www.kaiyuexiang.com
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification:
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!