Beijing Silk Road Enterprise Management Services Co., Ltd.
| Normal temperature Frequency Tolerance | ±30ppm |
| Load Capacitance | 20pF |
| Frequency | 13.52127MHz |
| Description | Crystal 13.52127MHz ±30ppm 20pF HC-49S-SMD |
| Mfr. Part # | KSD1352A2030 |
| Package | HC-49S-SMD |
| Model Number | KSD1352A2030 |
View Detail Information
Explore similar products
Quartz Crystal Resonator with 25 MHz Frequency KYX K2B250001010 SMD 2.0 by 1.6
Crystal Oscillator Liming 49MD-5.1302-20-10-10/B for Automotive Applications and
Crystal oscillator 38 megahertz frequency muRata XRCGB38M400FXH17R0 suitable for
crystal oscillator CREC 01XMD122JLVF026298200 for GPS Bluetooth mobile phones
Product Specification
| Normal temperature Frequency Tolerance | ±30ppm | Load Capacitance | 20pF |
| Frequency | 13.52127MHz | Description | Crystal 13.52127MHz ±30ppm 20pF HC-49S-SMD |
| Mfr. Part # | KSD1352A2030 | Package | HC-49S-SMD |
| Model Number | KSD1352A2030 |
The HC-49USSMD/13.52127 MHZ is a Quartz Crystal Resonator manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It features a frequency of 13.52127 MHz with a frequency tolerance of 30ppm and a load capacitance of 20pF. This SMD-type resonator is designed for applications requiring stable frequency control.
| Parameter | Value | Unit | Notes |
|---|---|---|---|
| Normal Frequency | 13.52127 | MHz | |
| Frequency Tolerance (252) | 30 | ppm | |
| Temperature Stability | 20 | ppm | |
| Operating Temperature Range | -20 to +70 | ||
| Load Capacitance | 20 | PF | |
| Motional Capacitance | 3 | PF | MAX |
| Shunt Capacitance | |||
| Effective Series Resistance | 60 | MAX | |
| Insulation Resistance | 500 | M OHMS | MIN AT DC 100V |
| Holder Type | HC-49USSMD | AT CUT | |
| Mode of Vibration | FUND | S&A | |
| Oscillation Mode | KH-1240 | ||
| Storage Temperature | -40 to +85 | ||
| Driver Level | 100 | W | |
| Solderability | 95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | ||
| Shock Test | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. | ||
| Vibration Test | Frequency: 1055Hz, Period: 12min, Full Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2hours/each direction | Electrical characteristics shall be satisfied after supplying following Vibration. | |
| Strength of Terminals/Lead-wires - Pulling Test | 900g tension weight for 30 sec. | Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. After above test a), there is no observation of any visual damages on the specimen. | |
| Strength of Terminals/Lead-wires - Bending Test | 90degree bending with 225gs tension weight. | Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. After that, terminals/lead-wires shall be straightened gradually. Then the same bending and straightening shall be supplied to the opposite direction in the same axial. After above test a), there is no observation of any visual damages on the specimen. | |
| Sealing Tightness | No gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| Soldering Dip | Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from bottom of specimens body. Soldering portion over 90% of terminals/lead-wires dipped. | (After applying ROSIN flux) | |
| Solder Heating | Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires. | Electrical characteristics shall be satisfied after dipping. | |
| Humidity Test | Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours. | ||
| Storage in Low Temperature | Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours. | ||
| Storage in High Temperature | Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours. | ||
| Temperature Cycle | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift from low to high, high to low shall be done in 1/min. | (Refer to Fig-2) |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!