Beijing Silk Road Enterprise Management Services Co., Ltd.
| Description | Oscillators RoHS |
| Mfr. Part # | LTPL-C034UVG365 |
| Model Number | LTPL-C034UVG365 |
View Detail Information
Explore similar products
CMOS SMD TCXO ECS ECS-327TXO-2012-33-TR compact ceramic package for IoT devices
Crystal oscillator muRata XNCLH19M200THJA1P0 19200000 megahertz frequency
Stable Frequency TCXO ECS ECS-TXO-2016-33-320-TR Miniature SMD CMOS with Low
quartz pll oscillator RENESAS XK33R156R312R625I with ultra low phase noise and
Product Specification
| Description | Oscillators RoHS | Mfr. Part # | LTPL-C034UVG365 |
| Model Number | LTPL-C034UVG365 |
The LiteON C03 UV Product series is a revolutionary, energy-efficient light source designed for UV curing and common UV applications. It combines the long lifetime and reliability advantages of Light Emitting Diodes (LEDs) with the brightness of conventional light sources. This series offers design freedom and creates new opportunities for solid-state UV light sources to displace conventional UV technologies. Key features include I.C. compatibility, RoHS compliance, and lower operating and maintenance costs.
| Parameter | Symbol | Rating | Unit | Test Condition | Notes |
|---|---|---|---|---|---|
| DC Forward Current | If | 1000 | mA | ||
| Power Consumption | Po | 4.4 | W | ||
| Operating Temp Range | Topr | -40 ~ +85 | C | ||
| Storage Temp Range | Tstg | -55 ~ +100 | C | ||
| Junction Temperature | Tj | 125 | C | ||
| Forward Voltage | Vf | Min. 3.2 Typ. 3.8 Max. 4.4 | V | If = 700mA | |
| Radiant Flux | Min. 1050 Typ. 1300 Max 1545 | mW | If = 700mA | Radiant flux (mW) is the total Radiant flux output as measured with an integrating sphere. | |
| Peak Wavelength | Wp | Min. 360 Max 370 | nm | If = 700mA | |
| Viewing Angle | 21/2 | Typ. 130 | If = 700mA | ||
| Thermal Resistance | Rthjs | Typ 5.1 | C/W | (Junction to solder) measurement tolerance is 10% |
| Vf Bin | Vf (V) @ If = 700mA (Min.) | Vf (V) @ If = 700mA (Max.) |
|---|---|---|
| V1 | 3.2 | 3.6 |
| V2 | 3.6 | 4.0 |
| V3 | 4.0 | 4.4 |
Forward Voltage Tolerance: +/- 0.1 V
| mW Bin | mW @ If = 700mA (Min.) | mW @ If = 700mA (Max.) |
|---|---|---|
| PR | 1050 | 1135 |
| RS | 1135 | 1225 |
| ST | 1225 | 1325 |
| TU | 1325 | 1430 |
| UV | 1430 | 1545 |
Radiant Flux Tolerance: +/- 10%
| Wp Bin | Wp (nm) @ If = 700mA (Min.) | Wp (nm) @ If = 700mA (Max.) |
|---|---|---|
| P3M | 360 | 365 |
| P3N | 365 | 370 |
Peak Wavelength Tolerance: +/- 3nm
All dimensions are in millimeters and dimension tolerances are 0.2mm except lens height and ceramic length / width dimension tolerance are 0.1mm. The thermal pad of the device is electrically neutral from the anode and cathode pads.
| Test Item | Condition | Duration | Number of Failed |
|---|---|---|---|
| Low Temperature Operating Life (LTOL) | Tc= -10C, If = 700mA | 1000 hrs | 0/10 |
| Room Temperature Operating Life (RTOL) | 25C, If = 1000mA | 1000 hrs | 0/10 |
| High Temperature Operating Life (HTOL) | Tc= 85C, If = 700mA | 1000 hrs | 0/10 |
| Wet High Temperature Operating Life (WHTOL) | 60C/90%RH, If = 350mA | 500 hrs | 0/10 |
| Non-Operating Thermal Shock (TMSK) | -40C to 125C, 30 minutes dwell, <10 seconds transfer | 100 cycles | 0/10 |
| Resistance to Soldering Heat (Reflow Soldering) | TSld = 260C, 10 sec | 2 times | 0/10 |
| Solder ability Test | 245C, 5sec | 1 time | 0/10 |
Criteria for Judging the Damage:
Refer to the provided soldering profile for reflow soldering. Lowest possible temperature is desirable. LiteOn cannot guarantee LEDs assembled using the dip soldering method.
LEDs can be soldered using reflow or hand soldering. Recommended hand soldering: 300C max. and 2secs max. once. Reflow soldering: up to three times maximum. Avoid rapid cooling. LiteOn cannot guarantee LEDs assembled using the dip soldering method.
Refer to provided diagrams for tape and reel package dimensions. 7 inch reel maximum 500 pieces per reel. Maximum consecutive missing lamps is two. In accordance with EIA-481-1-B specifications.
Use alcohol-based cleaning solvents such as isopropyl alcohol. Do not use unspecified chemical liquids.
LEDs are current-operated devices. A current limiting resistor in series with each LED is recommended for intensity uniformity. Avoid continuous reverse current. Do not use sulfur-containing materials, high moisture (over 85% RH), dew condensation, briny air, or corrosive gases (Cl, H2S, NH3, SO2, NOX, etc.).
Pick up LEDs by the sides of the body. Do not apply pressure to the lens. Do not puncture or push the lens.
Static electricity or power surge can damage LEDs. Use conductive wrist bands or anti-electrostatic gloves. Ensure all devices, equipment, and machinery are properly grounded. Work tables and storage racks should be grounded. Use an ion blower to neutralize static charge. ESD-damaged LEDs may exhibit abnormal characteristics. Verify functionality by checking "light up" and VF at low currents (>2.0V@0.5mA for good LEDs).
Product is qualified as Moisture sensitive Level 3 per JEDEC J-STD-020. Store sealed packages at 30C and 85% RH, use within one year. Once opened, store at 30C and 60% RH, solder within 168 hours. If Humidity Indicator shows pink or storage time is exceeded, bake at 60C for at least 24 hours before soldering. Return unused LEDs to the original package with desiccants.
Do NOT directly look at the UV light from the LED. Use UV goggles or protective glasses to avoid eye damage.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!