Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -40℃~+85℃ |
| Output Frequency(Max) | 100MHz |
| Number of Outputs | 2 |
| Voltage - Supply | 1.71V~3.63V |
| Description | 100MHz 2 VFLGA-6 Pin Configurable/Selectable Oscillators RoHS |
| Mfr. Part # | DSC612PI3A-010J |
| Package | VFLGA-6 |
| Model Number | DSC612PI3A-010J |
View Detail Information
Explore similar products
three output MEMS clock generator MICROCHIP DSC613RA2A-0106 with excellent
Dual output MEMS clock generator MICROCHIP DSC612RI1A-012M with frequency range
Ultra small footprint clock generator MICROCHIP DSC612RI3A-010J with two
MICROCHIP DSC612PI3A010K ultra small MEMS clock generator with two configurable
Product Specification
| Operating Temperature | -40℃~+85℃ | Output Frequency(Max) | 100MHz |
| Number of Outputs | 2 | Voltage - Supply | 1.71V~3.63V |
| Description | 100MHz 2 VFLGA-6 Pin Configurable/Selectable Oscillators RoHS | Mfr. Part # | DSC612PI3A-010J |
| Package | VFLGA-6 | Model Number | DSC612PI3A-010J |
The DSC612 is a MEMS-based, crystal-less clock generator family offering ultra-small footprint and low power consumption. It generates up to two independent LVCMOS output clocks from 2 kHz to 100 MHz, eliminating the need for external crystals. Utilizing Microchips PureSilicon MEMS technology, it provides low jitter and high frequency stability across a wide range of supply voltages and temperatures. The device features configurable control pins for output enable/disable, standby, sleep, spread spectrum enable, and frequency select, enhancing reliability and accelerating product development. Available in compact VFLGA packages, it is suitable for low power, portable, consumer, and industrial applications.
| Parameter | Symbol | Min. | Typ. | Max. | Units | Conditions |
| Supply Voltage | VDD | 1.71 | 3.63 | V | Note 1 | |
| Active Supply Current | IDD | 5 | 6 | mA | fCLK1 = 27 MHz, fCLK2 = 25 MHz, VDD = 1.8V, No Load | |
| Active Supply Current (Sleep Mode, 1 PLL Off) | IDDSL | 3 | mA | CLK2 = SLEEP, fCLK1 = 25 MHz, VDD = 1.8V, No Load | ||
| Active Supply Current (32.768 kHz Output Only) | IDD32k | 1.4 | mA | CLK2 = SLEEP, fCLK1 = 32.768 kHz, VDD = 1.8V, No Load | ||
| Standby Supply Current | ISTDBY | 1.0 | A | VDD = 1.8V/2.5V | ||
| Standby Supply Current | ISTDBY | 1.5 | A | VDD = 3.3V | ||
| Frequency Stability | f | 20 | ppm | All temperature ranges | ||
| Frequency Stability | f | 25 | ppm | All temperature ranges | ||
| Frequency Stability | f | 50 | ppm | All temperature ranges | ||
| Aging | f | 5 | ppm | 1st year @ +25C | ||
| Aging | f | 1 | Per year after the first year | |||
| Startup Time | tSU | 1.5 | ms | From 90% VDD to valid clock output, T = +25C | ||
| Input Logic High | VIH | 0.7 x VDD | V | Input waveform must be monotonic with rise/fall time < 10 ms. | ||
| Input Logic Low | VIL | 0.3 x VDD | V | Input waveform must be monotonic with rise/fall time < 10 ms. | ||
| Output Disable Time | tDA | 200 + 2 Periods | ns | Note 5 | ||
| Output Enable Time | tEN | 1.0 | s | Note 6 | ||
| Enable Pull-Up Resistor | 300 | k | Note 7 | |||
| Output Logic High | VOHY | 0.8 x VDD | V | I = 6 mA (high drive) or I = 3 mA (standard drive) | ||
| Output Logic Low | VOLY | 0.2 x VDD | I = 6 mA (high drive) or I = 3 mA (standard drive) | |||
| Output Transition Time, Rise Time/Fall Time (Standard drive) | tRY1/tFY1 | 1.2 | 2.0 | ns | CL = 10 pF, VDD = 1.8V | |
| Output Transition Time, Rise Time/Fall Time (Standard drive) | tRY1/tFY1 | 0.6 | 1.2 | ns | CL = 10 pF, VDD = 2.5V/3.3V | |
| Output Transition Time, Rise Time/Fall Time (High drive) | tRY2/tFY2 | 1.0 | 1.5 | ns | CL = 15 pF, VDD = 1.8V | |
| Output Transition Time, Rise Time/Fall Time (High drive) | tRY2/tFY2 | 0.5 | 1.0 | ns | CL = 15 pF, VDD = 2.5V/3.3V | |
| Output Frequency | f0 | 0.002 | 100 | MHz | ||
| Output Duty Cycle | SYM | 45 | 55 | % | ||
| Period Jitter, RMS | JPER | 17 | ps | fCLK1 = 24 MHz, fCLK2 = 27 MHz, VDD = 1.8V | ||
| Period Jitter, RMS | JPER | 14 | ps | fCLK1 = 24 MHz, fCLK2 = 27 MHz, VDD = 3.3V | ||
| Period Jitter, RMS | JPER | 9 | ps | fCLK1 = 27 MHz, fCLK2 = 27 MHz or 32.768 kHz, VDD = 3.3V | ||
| Period Jitter, Peak-to-Peak | JPER | 120 | ps | fCLK1 = 24 MHz, fCLK2 = 27 MHz, VDD = 1.8V | ||
| Period Jitter, Peak-to-Peak | JPER | 100 | ps | fCLK1 = 24 MHz, fCLK2 = 27 MHz, VDD = 3.3V | ||
| Period Jitter, Peak-to-Peak | JPER | 80 | ps | fCLK1 = 27 MHz, fCLK2 = 27 MHz or 32.768 kHz, VDD = 3.3V | ||
| Cycle-to-Cycle Jitter (peak) | JCy-Cy | 105 | ps | fCLK1 = 24 MHz, fCLK2 = 27 MHz, VDD = 1.8V | ||
| Cycle-to-Cycle Jitter (peak) | JCy-Cy | 90 | ps | fCLK1 = 24 MHz, fCLK2 = 27 MHz, VDD = 3.3V | ||
| Cycle-to-Cycle Jitter (peak) | JCy-Cy | 70 | ps | fCLK1 = 27 MHz, fCLK2 = 27 MHz or 32.768 kHz, VDD = 3.3V | ||
| Junction Operating Temperature | TJ | +150 | C | |||
| Storage Temperature Range | TS | 55 | +150 | C | ||
| Lead Temperature | +260 | C | Soldering, 40s |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!