Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 220nF |
| Tolerance | ±5% |
| Voltage Rating | 1.2kV |
| Description | 220nF Film Capacitor ±5% 1.2kV Through Hole P=27.5mm |
| Mfr. Part # | MMKP224J3L2701 |
| Package | Through Hole,P=27.5mm |
| Model Number | MMKP224J3L2701 |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Capacitance | 220nF | Tolerance | ±5% |
| Voltage Rating | 1.2kV | Description | 220nF Film Capacitor ±5% 1.2kV Through Hole P=27.5mm |
| Mfr. Part # | MMKP224J3L2701 | Package | Through Hole,P=27.5mm |
| Model Number | MMKP224J3L2701 |
The MMKP82 is a double-sided metallized polypropylene film capacitor (Box-type) designed for high-voltage, high-frequency pulse circuits. It features excellent flame resistance, low loss, and a negative temperature coefficient of capacitance. This capacitor is widely used in electronic ballasts, compact lamps, and SNUBBER and SCR commutating circuits.
| Item | Performance Requirement | Test Method | Details |
|---|---|---|---|
| Operating Temperature Range | -40 — +105℃ | GB/T 10190 (IEC 60384-16) | |
| Rated Voltage (UR) | 400VDC/630VDC/1000VDC/1250VDC/1600VDC/2000VDC/3000VDC | ||
| Capacitance Range | 0.0022 — 1.8μF | ||
| Capacitance Tolerance | ±2%(G), ±3%(H), ±5%(J), ±10%(K) | Ref. item 4.2.2 | 1kHz |
| Dissipation Factor (tgδ) | ≤ 0.0010 | Ref. item 4.2.3 | (20℃, 1KHz, 0.1V) |
| Dielectric Strength | 1.6UR, 5s, no breakdown or flashover | Ref. item 4.2.1 | |
| Insulation Resistance (IR) | ≥50000MΩ, C≤0.33μF; ≥30000, C>0.33μF; (100V, 20℃, 1min) | Ref. item 4.2.4 | Test voltage setting: 10V≤UR<100V, test voltage is 10V; 100V≤UR<500V, test voltage is 100V; UR≥500V, test voltage is 500V (20℃, 1min) |
| Solderability | Good tin plating | Ref. item 4.5 | Soldering bath method Tb, method 1A (leakage current setting 20mA). Solder temperature: 235±2℃, Immersion time: 2.0±0.5s |
| Lead Strength | Tensile: 0.5≤φd≤0.8mm, 10N; 1.0≤φd≤1.2mm, 20N. Bending: 0.5≤φd≤0.8mm, 5N; 1.0≤φd≤1.2mm, 10N. | Ref. item 4.4 | No visible damage. Each direction bent twice continuously. |
| Resistance to Soldering Heat | No visible damage, clear marking | Ref. item 4.4 | Soldering bath method Tb, method 1A. 260±5℃, 10±1s. |
| Rapid Change of Temperature | No visible damage, clear marking. Capacitance change: ɖC/C≤±5% of initial measurement. tgδ increase: ≤0.0020 (10kHz, C≤1.0μF); ≤0.0020 (1kHz, C>1μF). IR change: ≥50% of rated value. | Ref. item 4.6 | QA=-40℃, QB=+105℃. 5 cycles, duration: t=30min. |
| Climatic Sequence | No visible damage, clear marking. Capacitance change: ɖC/C≤±3% of initial measurement. tgδ increase: ≤0.0030 (10kHz, C≤1.0μF); ≤0.0030 (1kHz, C>1μF). IR change: ≥50% of rated value. | Ref. item 4.10.2, 4.10.3, 4.10.4, 4.10.6 | Dry heat (+105℃, 16h), Cyclic damp heat (Test Db, severity b, first cycle), Cold (-40℃, 2h), Cyclic damp heat (Test Db, severity b, other cycles). After test, apply UR for 1 min. |
| Steady State Damp Heat | No obvious swelling, clear marking. Capacitance change: ɖC/C≤±2% of initial measurement. tgδ increase: ≤0.0010 (1kHz). IR change: ≥90% of rated value. | Ref. item 4.11 | 85℃, 85%RH, 48H |
| Endurance | No visible damage, clear marking. Capacitance change: ɖC/C≤±5% of initial measurement. tgδ increase: ≤0.0020 (10kHz). IR change: ≥50% of rated value. | Ref. item 4.12 | +85℃, 1000h. Applied voltage: 1.25 x rated voltage. |
| Capacitance vs. Temperature Characteristics | At points b, d, f. Lower limit temp (-40℃): 0≤(Cb-Cd)/Cd≤+3%. Upper limit temp (110℃): -4%≤(Cf-Cd)/Cd≥0. | Ref. item 4.2.6 | Charging voltage is rated voltage. Static method. Capacitors held at: a.(20±2)℃, b.(-40±3)℃, d.(20±2)℃, f.(110±2)℃, g.(20±2)℃. |
| Charge and Discharge | Capacitance change: ɖC/C≤±5% of initial measurement. tgδ increase: ≤0.0030 (10KHz, 0.1V). Dielectric strength: 1.6UR. IR change: ≥50% of rated value. No explosion or burning. | Ref. item 4.13 | Cycles: 10000. Charge time: 0.5s. Discharge time: 0.5s. Charging voltage: rated voltage. Charging resistance: 220/CR (Ω). Discharge resistance: 10/CR(Ω) or 20Ω (whichever is greater). CR is nominal capacitance (μF). |
| Pulse Voltage | Capacitance change: ɖC/C≤±5% of initial measurement. tgδ increase: ≤0.0020 (10kHz). IR change: ≥50% of rated value. Dielectric strength: 1.6UR. No explosion or burning. | Cycles: 24. Pulse voltage: 1.8UR. | |
| Ripple Current | Capacitance change: ɖC/C≤±10% of initial measurement. tgδ increase: ≤0.0030 (10kHz, 0.1V); ≤0.0030 (1kHz, 1V). IR change: ≥50% of rated value. Dielectric strength: 1.6UR. No explosion or burning. | Test temperature: Room temp. Ripple current: 10A. DC bias: rated voltage - ripple voltage. Test time: 5 hours. Test frequency: 100KHZ. | |
| Flammability Test | After removing from flame, continued burning time of any capacitor shall not exceed 30S, and the burning drippings of the capacitor shall not ignite the cotton paper laid underneath. | IEC695-2-2 Needle Flame Test, Flame resistance category C, exposed to flame once. | Volume (mm³): V≥250, exposure time 5s; 250 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!