Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 5uF |
| Operating Temperature | - |
| Tolerance | ±5% |
| Voltage Rating | 500V |
| Description | 5uF Film Capacitor ±5% 500V Through Hole |
| Mfr. Part # | MAC505J500A02 |
| Package | Through Hole |
| Model Number | MAC505J500A02 |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Capacitance | 5uF | Operating Temperature | - |
| Tolerance | ±5% | Voltage Rating | 500V |
| Description | 5uF Film Capacitor ±5% 500V Through Hole | Mfr. Part # | MAC505J500A02 |
| Package | Through Hole | Model Number | MAC505J500A02 |
The JIMSON MAC series capacitors are designed for AC motor applications, offering high current endurance up to 20A and special terminations for high current requirements. Featuring a non-inductive construction and self-healing properties, these capacitors are suitable for starting, running, and power factor correction in various electrical equipment including air conditioners, ventilators, electric fans, AC single-phase motors, fluorescent lamps, mercury lamps, and transformers. They are manufactured by (JIMSON ELECTRONICS (XIAMEN) CO.,LTD.) and comply with RoHS standards.
| Specification | Value | Test Conditions |
|---|---|---|
| Rated Capacitance | 5.0uF, 10uF | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms max. |
| Capacitance Tolerance | J = 5% | |
| Rated Voltage | 500VAC | |
| Voltage Proof (T-T) | 2*UR (10S) unit:VDC | |
| Voltage Proof (T-C) | 2*UR+1000V (60s) unit:VDC | |
| Dissipation Factor (DF) | 0.2% | at 20, 1kHz; Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms max. |
| Insulation Resistance (T-T) | 2000M (C<0.47F); 1000S (C0.47F) | Measured at rated voltage or less than 100VDC for 1 minute at 20 and RH65% |
| Insulation Resistance (T-C) | 2000M | Measured at rated voltage or less than 100VDC for 1 minute at 20 and RH65% |
| Endurance | C/C5%; IR50% of the specified value | 600 hours with 125% of rated voltage at 70 |
| Climatic Catalogue | 25/70/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355; Bath time: 2.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock | C/C5%, DF1.2*. Appearance: no visible damage after test. | Solder bath: 2605; Bath time: 5.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | No visible damage to appearance. | Pull: 2.2 LBS; Time: 5 sec |
| Lead Bending Strength | No visible damage to appearance. | Load of lead: 1.1 LBS; The body of capacitor is bent 90 degrees and returned to its original position |
| Vibration | No visible damage to appearance. | Frequency cycle: 10Hz to 55Hz and then 10Hz; Amplitude: 1.5mm in three directions; Time: 2 hours each direction (total 6 hours) |
| Reference Standards | IEC 60252, UL810, GB/T3667 | |
| Model (Example) | 505J500A02 (5.0uF) | |
| Model (Example) | 106J500A01 (10uF) | |
| Dimensions (for 5.0uF) | W: 47.0mm 10%, H: 34.0mm 10%, T: 22.0mm 10% | 187# single-ended terminal, lower center ear |
| Dimensions (for 10uF) | W: 47.0mm 10%, H: 34.0mm 10%, T: 20.0mm 10% | 187# double-ended terminal, flat |
| High Temperature Test (70) | Capacitance drift: +5% max of initial value; DF: less than 0.2% at 1KHz | |
| Low Temperature Test (-25) | Capacitance drift: -5% max of initial value; DF: less than 0.15% at 1KHz | |
| Humidity Test (40, 90-95% RH for 964% hrs) | Capacitance drift: +3% max of initial value; DF: less than 0.15% at 1KHz; Insulation resistance: over 50% of initial value | Followed by 16 hours recovery |
| Soldering Suggestion (Max) | Pre-heating: 105, 1min; Soldering: 270, 4S | |
| Storage Environment | Temperature 30, Humidity 70% | MBB unopened: 24 months storage period |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!