Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 220nF |
| Operating Temperature | -40℃~+85℃ |
| Tolerance | ±10% |
| Voltage Rating | 1kV |
| Description | 220nF Film Capacitor ±10% 1kV Through Hole P=27.5mm |
| Mfr. Part # | MPC224K1000D03 |
| Package | Through Hole,P=27.5mm |
| Model Number | MPC224K1000D03 |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Capacitance | 220nF | Operating Temperature | -40℃~+85℃ |
| Tolerance | ±10% | Voltage Rating | 1kV |
| Description | 220nF Film Capacitor ±10% 1kV Through Hole P=27.5mm | Mfr. Part # | MPC224K1000D03 |
| Package | Through Hole,P=27.5mm | Model Number | MPC224K1000D03 |
The JIMSON (JS) MPC Series Capacitors are non-inductive, self-healing capacitors designed for various electronic applications. Featuring a double-side polypropylene film dielectric and vacuum evaporated metal electrodes, these capacitors offer high moisture resistance and excellent physical and environmental characteristics. They are suitable for filtering and noise suppression circuits, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in general communication equipment. The capacitors are encapsulated in a reinforced flame-retardant plastic case meeting UL94V-0 requirements and are equipped with radial leads of tinned wire. They comply with RoHS standards.
| Description | Value | Test Conditions |
|---|---|---|
| Rated Capacitance | 0.0047~0.22uF | Measuring frequency: 1kHz, Measuring voltage: 1V |
| Capacitance Tolerance | J=5%, K=10% | |
| Rated Voltage | 1000~2000VDC | |
| Voltage Proof | 1.6*UR Unit:VDC (1 minute at 20) | No permanent breakdown and arcing |
| Dissipation Factor (DF) | 0.1% | (at 20, 1kHz), Measuring frequency: 1kHz, Measuring voltage: 1V |
| Insulation Resistance (IR) | C0.33uF: IR30000M C0.33uF: IR*C5000S | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C5%; DF0.40%; IR50% of the specified value | 1000 hours with 125% of rated voltage at 85. After the test |
| Climatic Catalogue | 40/85/21 | |
| Solder Ability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock | C/C5%, DF1.2* | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body. Capacitor appearance should be free from visible damage after the test. |
| Lead Tensile Strength | Appearance without damage | Pull: 2.2 LBS, Time: 5 sec |
| Lead Bending Strength | Lead without damage | Load of lead: 1.1 LBS. The body of capacitor is bent 90 degrees and returned to its original position. |
| Vibration | Appearance without visible damage | Frequency cycle: from 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction with a total of 6 hours. |
| Reference Standard | IEC 384-16, GB10190 | |
| Marking on Capacitor | Rated capacitance (e.g., 472~224), Rated voltage (e.g., 1000~2000VDC), Capacitance tolerance (e.g., J/K), Manufacturer's symbol (JIMSON/JS) | UV ink or laser engraving |
| Marking on Package | Type, rating, quantity, date of manufacture, location of manufacture, manufacturer's name | |
| Capacitance Unit Conversion | 1F=1,000mF=1,000,000uF=1,000,000,000nF=1,000,000,000,000pF | |
| Tolerance Symbols | F=1%, G=2%, J=5%, K=10%, M=20%, N=30% | |
| Dissipation Factor Standard Conditions | 20, 1kHz | |
| Insulation Resistance Test Conditions | T=20, RH65% | |
| High Temperature Test | Capacitance drift: +5% max of initial value; DF: < 0.2% (at 1KHz) | +85 |
| Low Temperature Test | Capacitance drift: -5% max of initial value; DF: < 0.15% (at 1KHz) | -40 |
| Humidity Test | Capacitance drift: +10% max of initial value; DF: < 0.2% (at 1KHz); Insulation resistance: > 50% of initial value | 853, 853% RH for 10001% hours, followed by 16 hours at room conditions |
| Model Example 1 | MPC104J1000D01 | 0.1uF, Yellow, W: 26.5mm, H: 18.5mm, T: 10.0mm, P: 22.5mm, D: 0.8mm, L: 21.0mm |
| Model Example 2 | MPC224K1000D03 | 0.22uF, Yellow, W: 32.0mm, H: 22.0mm, T: 13.0mm, P: 27.5mm, D: 0.8mm, L: 21.0mm |
| Soldering Suggestion (Max Temp) | 270 | 4 sec |
| Soldering Suggestion (Pre-heating) | 105 | 1 min |
| Storage Environment | Temperature 30, Humidity 70% | MBB (Moisture Barrier Bag) not open ensures 24 months storage period. |
| Storage Condition Note | Avoid exposure to atmosphere containing hydrogen chloride, hydrogen sulfide, sulfuric acid. Avoid high temperature and high humidity. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!