Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 2.2nF |
| Operating Temperature | -40℃~+105℃ |
| Tolerance | ±5% |
| Voltage Rating | 2.5kV |
| Description | 2.2nF Film Capacitor ±5% 2.5kV Through Hole P=15mm |
| Mfr. Part # | MMKP222J3E1501 |
| Package | Through Hole,P=15mm |
| Model Number | MMKP222J3E1501 |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Capacitance | 2.2nF | Operating Temperature | -40℃~+105℃ |
| Tolerance | ±5% | Voltage Rating | 2.5kV |
| Description | 2.2nF Film Capacitor ±5% 2.5kV Through Hole P=15mm | Mfr. Part # | MMKP222J3E1501 |
| Package | Through Hole,P=15mm | Model Number | MMKP222J3E1501 |
The MMKP82 series is a double-sided metallized polypropylene film capacitor (box-type) designed for high-voltage, high-frequency pulse circuits. It features low loss, small internal temperature rise, a negative temperature coefficient of capacitance, and excellent flame-resistant properties. This capacitor is widely used in electronic ballasts, compact lamps, and SNUBBER and SCR commutating circuits. The construction utilizes a polypropylene film dielectric with a double-sided metallized polyester film as electrodes, a non-inductive configuration with spray-metal, unilateral lead-out, tin-plated copper wires, and flame-retardant epoxy resin encapsulation.
| Item | Performance Requirement | Test Method | Notes |
|---|---|---|---|
| Applicable Temperature Range | -40 ~ +105 | GB/T 10190 (IEC 60384-16) | |
| Rated Voltage (UR) | 400VDC/630VDC/1000VDC/1250VDC/1600VDC/2000VDC/3000VDC | ||
| Capacitance Range | 0.0022 ~ 1.8F | ||
| Capacitance Tolerance | 2%(G), 3%(H), 5%(J), 10%(K) | Ref. item 4.2.2 | |
| Dissipation Factor (tg) | 0.0010 | Ref. item 4.2.3 | (20, 1KHz, 0.1V) |
| Dielectric Strength | 1.6UR, 5s (No breakdown or flashover) | Ref. item 4.2.1 | |
| Insulation Resistance (IR) | 50000M (CN0.33F); 30000M (CN>0.33F) | Ref. item 4.2.4 | (100V, 20, 1min) |
| Solderability | Good tin plating | Ref. item 4.5 | Soldering pot method Tb, Method 1A (Leakage current set to 20mA) |
| Lead Strength (Tensile) | 0.5d0.8mm, 10N; 1.0d1.2mm, 20N | Ref. item 4.3 | |
| Lead Strength (Bending) | 0.5d0.8mm, 5N; 1.0d1.2mm, 10N | Ref. item 4.3 | Two consecutive bends in each direction |
| Resistance to Soldering Heat | No visible damage, clear marking | Ref. item 4.4 | Soldering pot method Tb, Method 1A; 2605, 101s |
| Final Measurement (after Soldering Heat) | Capacitance: C/C2% of initial; tg increase: tg 0.0020 (10kHz, C1.0F) or tg 0.0020 (1kHz, C>1F); IR: 50% of rated | ||
| Rapid Change of Temperature | No visible damage, clear marking; Capacitance: C/C5% of initial; tg increase: tg 0.0020 (10kHz, C1.0F) or tg 0.0020 (1kHz, C>1F); IR: 50% of rated | Ref. item 4.6 | -40 to +105, 5 cycles |
| Climatic Sequence | No visible damage, clear marking; Capacitance change: C/C3% of initial; tg increase: tg 0.0030 (10kHz, C1.0F) or tg 0.0030 (1kHz, C>1F); IR: 50% of rated | Ref. item 4.10.2, 4.10.3, 4.10.4, 4.10.6 | Includes dry heat, cyclic damp heat, cold, and damp heat tests. Applied UR for 1 min after test. |
| Damp Heat (Steady State) | No obvious swelling, clear marking; Capacitance change: C/C2% of initial; tg increase: tg 0.0010 (1kHz); IR: 90% of rated | Ref. item 4.11 | 85, 85%RH, 48H |
| Endurance | No visible damage, clear marking; Capacitance change: C/C5% of initial; tg increase: tg 0.0020 (10kHz); IR: 50% of rated | Ref. item 4.12 | +85, 1000h, applied voltage: 1.25 times rated voltage |
| Characteristic with Temperature | Capacitance measurement at points b, d, f. | Ref. item 4.2.6 | At lower category temp -40: 0(Cb-Cd)/Cd+3%; At upper category temp 110: -4%(Cf-Cd)/Cd0. Charging voltage = rated voltage. |
| Charge and Discharge | Capacitance: C/C5% of initial; tg increase: tg 0.0030 (10KHz, 0.1V); Dielectric Strength: 1.6UR; IR: 50% of rated. No cracking or burning. | Ref. item 4.13 | 10000 cycles. Charging time: 0.5s, Discharge time: 0.5s. Charging voltage = rated voltage. |
| Pulse Voltage | C/C5% of initial; tg increase: tg 0.0020 (10kHz); IR: 50% of rated. Dielectric Strength: 1.6UR. | 24 cycles. Pulse voltage: 1.8UR. No cracking or burning. | |
| Ripple Current | Capacitance change C/C10% of initial; tg increase tg 0.0030(10kHz, 0.1V) or tg 0.0030(1kHz, 1V); IR: 50% of rated. Dielectric Strength: 1.6UR. | Test temperature: Room temp. Ripple current: 10A. DC bias = rated voltage - ripple voltage. Test time: 5 hours. Test frequency: 100KHZ. | |
| Flame Retardancy Test | Time of continued burning after removal from flame 30S, and drippings should not ignite cotton paper laid beneath. | IEC695-2-2 Needle Flame Test, Flame Resistance Class C, one exposure to flame. | Volume (mm): V250 (5S), 250 |
| Customer P/N | Capacitance (F) | Symbol | Tolerance (%) | Rated Voltage (VDC) | Dimensions (mm) W x H x T | Lead Pitch (P) | Wire Diameter (d) | Lead Length (L) | KYET P/N |
|---|---|---|---|---|---|---|---|---|---|
| MMKP82 222J2500V P15 | 0.0022 | 222 | 5 | 2500 | 18 x 11 x 5 | 15 | 0.8 | 20 | MMKP222J3E1501 |
If the working voltage (U) is lower than the rated voltage (UR), the capacitor can operate at a higher dV/dt. The allowed dV/dt value should be multiplied by UR/U.
| UR (V) | dV/dt (V/s) P=7.5 | P=10.0 | P=15.0 | P=22.5 | P=27.5 |
|---|---|---|---|---|---|
| 250 | 1200 | 1000 | 550 | 250 | 200 |
| 400 | 1800 | 1500 | 900 | 500 | 300 |
| 630 | 3200 | 3200 | 2500 | 1500 | 900 |
| 1000 | 6000 | 6000 | 3300 | 2100 | 1000 |
| 1600 | ------- | ------- | 6000 | 3000 | 2000 |
| 2000 | ------- | ------- | 10000 | 5000 | 2200 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!