Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 27nF |
| Operating Temperature | -40℃~+100℃ |
| Tolerance | ±5% |
| Voltage Rating | 1kV |
| Description | 27nF Film Capacitor ±5% 1kV Through Hole P=15mm |
| Mfr. Part # | MMKP273J3A1501 |
| Package | Through Hole,P=15mm |
| Model Number | MMKP273J3A1501 |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Capacitance | 27nF | Operating Temperature | -40℃~+100℃ |
| Tolerance | ±5% | Voltage Rating | 1kV |
| Description | 27nF Film Capacitor ±5% 1kV Through Hole P=15mm | Mfr. Part # | MMKP273J3A1501 |
| Package | Through Hole,P=15mm | Model Number | MMKP273J3A1501 |
The MMKP82 is a double-sided metallized polypropylene film capacitor (box-type) designed for high-voltage, high-frequency pulse circuits. It features low loss, small internal temperature rise, a negative temperature coefficient of capacitance, and excellent flame-resistant properties. This capacitor is widely used in electronic ballasts, compact lamps, and SNUBBER and SCR commutating circuits. It utilizes a polypropylene film dielectric with a double-sided metallized polyester film as electrodes, a non-inductive configuration with twin section spray-metal, and is sealed with flame-retardant epoxy resin. The lead-out wires are tin-plated copper.
| Item | Performance Requirement | Test Method | Remarks |
| Applicable Temperature Range | -40 — +105℃ | GB/T 10190 (IEC 60384-16) | |
| Rated Voltage UR | 400VDC/630VDC/1000VDC/1250VDC/1600VDC/2000VDC/3000VDC | ||
| Capacitance Range | 0.0022 – 1.8µF | ||
| Capacitance Tolerance | ±2%(G), ±3%(H), ±5%(J), ±10%(K) | Ref. item 4.2.2 | 1kHz |
| Dissipation Factor (tgδ) | ≤ 0.0010 | Ref. item 4.2.3 | (20℃, 1KHz, 0.1V) |
| Dielectric Strength | 1.6UR, 5s No breakdown or flashover | Ref. item 4.2.1 | |
| Insulation Resistance (IR) | ≥50000M™, CN≤ 0.33µF; IR≥30000, CN>0.33µF | Ref. item 4.2.4 | (100V, 20℃, 1min) |
| Solderability | Good tin plating | Ref. item 4.5 | Soldering bath method Tb, Method 1A (Leakage current set to 20mA) Solder temperature: 235±2℃, Immersion time: 2.0±0.5s |
| Lead Strength (Tensile) | 0.5≤ϕd≤0.8mm, 10N; 1.0≤ϕd≤1.2mm, 20N | Ref. item 4.3 | |
| Lead Strength (Bending) | 0.5≤ϕd≤0.8mm, 5N; 1.0≤ϕd≤1.2mm, 10N | Ref. item 4.3 | Two consecutive bends in each direction |
| Resistance to Soldering Heat | No visible damage, clear marking | Ref. item 4.4 | Soldering bath method Tb, Method 1A, 260±5℃, 10±1s |
| Capacitance Change (after tests) | ±2% to ±5% (depending on test) | See individual test items | |
| Dissipation Factor Increase (after tests) | ≤ 0.0020 to ≤ 0.0030 (depending on test) | See individual test items | |
| Insulation Resistance (after tests) | ≥ 50% of rated value | See individual test items | |
| Rapid Change of Temperature | No visible damage, clear marking | Ref. item 4.6 | -40℃ to +105℃, 5 cycles |
| Climatic Sequence | No visible damage, clear marking | Ref. item 4.10.2, 4.10.3, 4.10.4, 4.10.6 | Includes dry heat, cyclic damp heat, cold |
| Damp Heat (Steady State) | No obvious bulging, clear marking | Ref. item 4.11 | 85℃, 85%RH, 48H |
| Endurance | No visible damage, clear marking | Ref. item 4.12 | +85℃, 1000h, applied voltage: 1.25 times rated voltage |
| Characteristics Dependent on Temperature | –4% to +3% (depending on temperature point) | Ref. item 4.2.6 | Measurement at points b, d, f |
| Charge and Discharge | No cracking, no burning | Ref. item 4.13 | 10000 cycles |
| Pulse Voltage | No cracking, no burning | 1.8UR, 24 cycles | |
| Ripple Current | No cracking, no burning | 10A, 5 hours | |
| Flame Retardancy Test | Ignition time limits, no ignition of cotton paper below | IEC695-2-2 Needle Flame Test | Class C, exposure time depends on volume |
| Model | Cap. (uF) | Symbol | Tol. ±% | R.V. (VDC) | Dimensions in mm (W x H x T) | P (mm) | ϕd (mm) | L (mm) | KYET P/N |
| MMKP82 | 0.027 | 273 | 5 | 1000 | 18 x 16 x 10 | 15 | 0.8 | 20 | MMKP273J3A1501 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!