| Capacitance | 1uF |
| Operating Temperature | -40℃~+100℃ |
| Tolerance | ±5% |
| Voltage Rating | 450V |
| Description | 1uF Film Capacitor ±5% 450V Through Hole P=10mm |
| Mfr. Part # | MPB105J2S1001 |
| Package | Through Hole,P=10mm |
| Model Number | MPB105J2S1001 |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Capacitance | 1uF | Operating Temperature | -40℃~+100℃ |
| Tolerance | ±5% | Voltage Rating | 450V |
| Description | 1uF Film Capacitor ±5% 450V Through Hole P=10mm | Mfr. Part # | MPB105J2S1001 |
| Package | Through Hole,P=10mm | Model Number | MPB105J2S1001 |
This specification covers the KYET Metallized Polypropylene Film Capacitors (MPB Series, low noise). These capacitors are designed for reliable operation within a wide temperature range and are suitable for various circuit applications where stable performance is required.
| Item | Description | Specifications |
|---|---|---|
| General Specifications | ||
| Scope | Specifications for KYET Metallized Polypropylene Film Capacitors (MPP/MPB/CBB21/CBB22) | - |
| Ambient Temperature | Measurement conditions | 15 to 35 (Standard), +20 5 (for doubtful results) |
| Relative Humidity | Measurement conditions | 45% to 75% (Standard), 60% to 70% (for doubtful results) |
| Air Pressure | Measurement conditions | 86 kpa to 106 kpa |
| Operating Temperature Range | Continuous operation at rated voltage | -40 to +100 |
| Dielectric | - | Metallized Polypropylene Film |
| Metal Spray | - | Special Solder |
| Lead Wire | - | Tin-plated Copper-clad Steel Wire |
| Encapsulation | - | Epoxy Resin (UL V-0 Flame Retardant) |
| Plastic Case | - | UL V-0 Flame Retardant |
| Marking | Manufacturer Symbol | KYET ELECTRONICS CO., LTD |
| Marking | Type/Material | MPP (Metallized Polypropylene Film) |
| Marking | Capacitor Class | MPB |
| Marking | Nominal Capacitance | Expressed in 3-digit (EIA) code |
| Marking | Tolerance | J (5%), K (10%), M (20%) |
| Marking | Rated Voltage | 100, 250, 400, 450, 630, 1000 VDC |
| Marking | Operating Temperature Range | -40100 |
| Dissipation Factor (DF) | Max. at 1KHz, 25 | 0.001 (0.1%) |
| Insulation Resistance (IR) | CR0.33F | 10000M |
| Insulation Resistance (IR) | CR0.33F | 5000M/F |
| Electrical Characteristics | ||
| Withstand Voltage (TV) | Between Terminals | 1.5 * Ur (DC) for 60 sec. (No abnormality) |
| Withstand Voltage (TV) | Between Terminals & Enclosure | 2 * Ur + 500V for 2 to 5 sec. (Min. 1000VDC) (No abnormality) |
| Dissipation Factor (DF) | at 1KHz | 0.001 (0.1%) |
| Capacitance (CAP) | Measurement Conditions | Within tolerance at +20 5, Measuring Frequency: 2%, Measuring Voltage: 1 Vrms |
| Insulation Resistance (I.R.) | C0.33uf | 10,000 Mohm (Vt=100 VDC, Charge Time: 605 sec.) |
| Insulation Resistance (I.R.) | C>0.33uf | 5,000 Mohm*uF/C (Vt=100 VDC, Charge Time: 605 sec.) |
| Soldering Property | Soldering temperature | +260 5 |
| Soldering Property | Immersion duration | 2 0.5 sec. |
| Mechanical Characteristics | ||
| Terminal Strength | Tensile Strength | Apply 1.0Kg for 10 1 sec. in axial direction (No abnormality) |
| Endurance Characteristics | ||
| Temperature Cycle | Appearance | Shall be no remarkable change |
| Temperature Cycle | Withstand Voltage | Shall satisfy NO.5.1 |
| Temperature Cycle | Capacitance Change Rate | Within 5% of the value before test |
| Temperature Cycle | Dissipation Factor | 0.002 (0.2%) max. @ 1KHz |
| Temperature Cycle | Insulation Resistance | 50% of the limit value of NO.5.4 |
| Dry Heat Resistance | Appearance | Shall be no remarkable change |
| Dry Heat Resistance | Test Temperature | +100 2 |
| Dry Heat Resistance | Test Duration | 16 + 1/-0 hrs. |
| Dry Heat Resistance | Withstand Voltage | Shall satisfy NO.5.1 |
| Dry Heat Resistance | Capacitance Change Rate | Within 5% of the value before test |
| Dry Heat Resistance | Dissipation Factor | 0.002 (0.2%) max. @ 1KHz |
| Dry Heat Resistance | Insulation Resistance | 50% of the limit value of NO.5.4 |
| Cold Resistance | Appearance | Shall be no remarkable change |
| Cold Resistance | Test Temperature | -40 3 |
| Cold Resistance | Test Duration | 2 1 hrs. |
| Cold Resistance | Withstand Voltage | Shall satisfy NO.5.1 |
| Cold Resistance | Capacitance Change Rate | Within 5% of the value before test |
| Cold Resistance | Dissipation Factor | 0.002 (0.2%) max. @ 1KHz |
| Cold Resistance | Insulation Resistance | 50% of the limit value of NO.5.4 |
| Damp Heat | Appearance | Shall be no remarkable change |
| Damp Heat | Test Temperature | +40 2 |
| Damp Heat | Test Humidity | 90% to 95% R.H. |
| Damp Heat | Test Duration | 2 1 hrs. |
| Damp Heat | Withstand Voltage | Shall satisfy NO.5.1 |
| Damp Heat | Capacitance Change Rate | Within 5% of the value before test |
| Damp Heat | Dissipation Factor | 0.002 (0.2%) max. @ 1KHz |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification:
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!