Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 15nF |
| Operating Temperature | -40℃~+105℃ |
| Tolerance | ±5% |
| Voltage Rating | 630V |
| Description | 15nF Film Capacitor ±5% 630V Through Hole P=10mm |
| Mfr. Part # | MMKP153J2J1001 |
| Package | Through Hole,P=10mm |
| Model Number | MMKP153J2J1001 |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Capacitance | 15nF | Operating Temperature | -40℃~+105℃ |
| Tolerance | ±5% | Voltage Rating | 630V |
| Description | 15nF Film Capacitor ±5% 630V Through Hole P=10mm | Mfr. Part # | MMKP153J2J1001 |
| Package | Through Hole,P=10mm | Model Number | MMKP153J2J1001 |
The MMKP82 Double sided metallized polypropylene film capacitor (Box-type) is designed for high voltage, high frequency, and pulse circuits. It features a double-sided metallized polypropylene structure with low loss, small internal temperature rise, and a negative temperature coefficient of capacitance. Its excellent flame-resistant properties make it suitable for electronic ballasts, compact lamps, and SNUBBER and SCR commutating circuits. The capacitor utilizes a polypropylene film dielectric and double-sided metallized polyester film electrodes, with a non-inductive configuration and tin-plated copper leads, sealed with flame-retardant epoxy resin.
| Item | Performance Requirement | Test Method | Details |
|---|---|---|---|
| Applicable Temperature Range | -40 +105 | GB/T 10190 (IEC 60384-16) | |
| Rated Voltage (UR) | 400VDC/630VDC/1000VDC/1250VDC/1600VDC/2000VDC/3000VDC | ||
| Capacitance Range | 0.00221.8 F | ||
| Capacitance Tolerance | 2%(G), 3%(H), 5%(J), 10%(K) | Ref. item 4.2.2 | 1kHz |
| Dissipation Factor (tg) | 0.0010 | Ref. item 4.2.3 | (20, 1KHz, 0.1V) |
| Dielectric Strength | 1.6UR, 5s No breakdown or arcing | Ref. item 4.2.1 | |
| Insulation Resistance (IR) | 50000M, CN0.33 F; IR30000, CN>0.33 F | Ref. item 4.2.4 | (100V, 20, 1min) |
| Solderability | Good tin plating | Ref. item 4.5 | Soldering bath method Ta, Method 1. Solder temp: 2352, Immersion time: 2.00.5s |
| Lead Strength (Tensile) | 0.5 d0.8mm, 10N; 1.0 d1.2mm, 20N | Ref. item 4.3 | |
| Lead Strength (Bending) | 0.5 d0.8mm, 5N; 1.0 d1.2mm, 10N | Ref. item 4.3 | Two consecutive bends in each direction |
| Resistance to Soldering Heat | No visible damage, clear marking | Ref. item 4.4 | Soldering bath method Tb, Method 1A. 2605, 101s |
| Rapid Change of Temperature | Appearance: No visible damage, clear marking. Capacitance change: C/C5% of initial measurement. tg increase: tg 0.0020 (10kHz, C1.0 F), tg 0.0020 (1kHz, C>1 F). IR: 50% of rated value. | Ref. item 4.6 | QA=-40, QB=+105. 5 cycles, duration: t=30min. |
| Climatic Sequence | Appearance: No visible damage, clear marking. Capacitance change: C/C3% of initial measurement. tg increase: tg 0.0030 (10kHz, C1.0 F), tg 0.0030 (1kHz, C>1 F). IR: 50% of rated value. | Ref. item 4.10.2, 4.10.3, 4.10.4, 4.10.6 | Includes Dry Heat, Cyclic Damp Heat, Cold. Apply UR for 1 min after test. |
| Steady State Damp Heat | Appearance: No obvious bulging, clear marking. Capacitance change: C/C2% of initial measurement. tg increase: tg 0.0010 (1kHz). IR: 90% of rated value. | Ref. item 4.11 | Temperature: 85, Humidity: 85%RH, Duration: 48H |
| Endurance | Appearance: No visible damage, clear marking. Capacitance change: C/C5% of initial measurement. tg increase: tg 0.0020 (10kHz). IR: 50% of rated value. | Ref. item 4.12 | +85, 1000h. Applied voltage: 1.25 times rated voltage. |
| Characteristic Dependent on Temperature | Capacitance measurement at points b, d, f. At lower category temperature -40: 0(Cb-Cd)/Cd+3%. At upper category temperature 110: -4%(Cf-Cd)/Cd0. | Ref. item 4.2.6 | Charging voltage is rated voltage. Static method, capacitor held at each temp sequentially. |
| Charge and Discharge | Capacitance change: C/C5% of initial measurement. tg increase: tg 0.0030 (10KHz, 0.1V). Dielectric Strength: 1.6UR. IR: 50% of rated value. Appearance: No explosion, no burning. | Ref. item 4.13 | Cycles: 10000. Charging time: 0.5s. Discharging time: 0.5s. Charging voltage is rated voltage. |
| Pulse Voltage | C/C5% of initial measurement. tg increase: tg 0.0020 (10kHz). IR: 50% of rated value. Dielectric Strength: 1.6UR. | Cycles: 24. Pulse voltage: 1.8UR. | |
| Ripple Current | Appearance: No explosion, no burning. Capacitance change: C/C10% of initial measurement. tg increase: tg 0.0030(10kHz, 0.1V), tg 0.0030(1kHz, 1V). IR: 50% of rated value. Dielectric Strength: 1.6UR. | Test temp: Room temp. Ripple current: 10A. DC bias = rated voltage - ripple voltage. Test time: 5 hours. Test frequency: 100KHZ. | |
| Flame Retardancy Test | After removing from flame, any capacitor shall not continue to burn for more than 30S, and the drippings from the capacitor shall not ignite the cotton paper laid beneath it. | IEC695-2-2 Needle Flame Test, Flammability Class C, exposed to flame once. | Exposure time depends on capacitor volume (mm): V250 (5S), 250 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!