Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 82nF |
| Operating Temperature | -40℃~+105℃ |
| Tolerance | ±5% |
| Voltage Rating | 630V |
| Description | 82nF Film Capacitor ±5% 630V Through Hole P=15mm |
| Mfr. Part # | MMKP823J2J1501 |
| Package | Through Hole,P=15mm |
| Model Number | MMKP823J2J1501 |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Capacitance | 82nF | Operating Temperature | -40℃~+105℃ |
| Tolerance | ±5% | Voltage Rating | 630V |
| Description | 82nF Film Capacitor ±5% 630V Through Hole P=15mm | Mfr. Part # | MMKP823J2J1501 |
| Package | Through Hole,P=15mm | Model Number | MMKP823J2J1501 |
The MMKP82 series is a double-sided metallized polypropylene film capacitor designed for high voltage, high frequency, and pulse circuits. It features low loss, small inherent temperature rise, a negative temperature coefficient of capacitance, and excellent flame resistance. This capacitor is widely used in electronic ballasts, compact fluorescent lamps, and SNUBBER and SCR commutating circuits.
| Item | Performance Requirement | Test Method | Details |
| Applicable Temperature Range | -40 — +105℃ | GB/T 10190 (IEC 60384-16) | |
| Rated Voltage (UR) | 400VDC/630VDC/1000VDC/1250VDC/1600VDC/2000VDC/3000VDC | ||
| Capacitance Range | 0.0022 — 1.8μF | ||
| Capacitance Tolerance | ±2%(G), ±3%(H), ±5%(J), ±10%(K) | Ref. item 4.2.2 | 1kHz |
| Dissipation Factor (tgδ) | ≤ 0.0010 | Ref. item 4.2.3 | (20℃, 1KHz, 0.1V) |
| Dielectric Strength | 1.6UR, 5s | Ref. item 4.2.1 | No breakdown or flashover |
| Insulation Resistance (IR) | ≥50000MΩ (C≤0.33μF); ≥30000 (C>0.33μF) | Ref. item 4.2.4 | (100V, 20℃, 1min) |
| Solderability | Good tin plating | Ref. item 4.5 | Soldering bath method Tb, Method 1A (Leakage current set to 20mA) |
| Initial Measurement | Capacitance, tgδ | Refer to NO. 5 | |
| Lead Strength | No visible damage | Ref. item 4.3 | Tensile: 10N (0.5≤φd≤0.8mm), 20N (1.0≤φd≤1.2mm); Bending: 5N (0.5≤φd≤0.8mm), 10N (1.0≤φd≤1.2mm) |
| Resistance to Soldering Heat | No visible damage, clear marking | Ref. item 4.4 | Soldering bath method Tb, Method 1A (260±5℃, 10±1s) |
| Final Measurement (after Soldering Heat) | Capacitance: ɖC/C≤±2% of initial; tgδ increase: ≤0.0020 (10kHz, C≤1.0μF) or ≤0.0020 (1kHz, C>1μF); IR: ≥50% of rated | ||
| Initial Measurement (after Rapid Change of Temp.) | tgδ | Ref. item 4.6 | Refer to NO. 5 |
| Rapid Change of Temperature | No visible damage | QA=-40℃, QB=+105℃, 5 cycles, 30min each | |
| Final Measurement (after Rapid Change of Temp.) | No visible damage, clear marking; Capacitance: ɖC/C≤±5% of initial; tgδ increase: ≤0.0020 (10kHz, C≤1.0μF) or ≤0.0020 (1kHz, C>1μF); IR: ≥50% of rated | ||
| Climatic Sequence | Initial Measurement: tgδ | Ref. item 4.10.2, 4.10.3, 4.10.4, 4.10.6 | Dry Heat (+105℃, 16h), Cyclic Damp Heat (Test Db, Severity b), Cold (-40℃, 2h), Cyclic Damp Heat (remaining cycles) |
| Final Measurement (after Climatic Sequence) | No visible damage, clear marking; Capacitance change: ɖC/C≤±3% of initial; tgδ increase: ≤0.0030 (10kHz, C≤1.0μF) or ≤0.0030 (1kHz, C>1μF); IR: ≥50% of rated | UR applied for 1 min after test | |
| Steady State Damp Heat | No obvious swelling, clear marking | Ref. item 4.11 | Temperature: 85℃, Humidity: 85%RH, Duration: 48H |
| Final Measurement (after Steady State Damp Heat) | Capacitance change: ɖC/C≤±2% of initial; tgδ increase: ≤0.0010 (1kHz); IR: ≥90% of rated | ||
| Endurance | No visible damage, clear marking | Ref. item 4.12 | +85℃, 1000h, Applied voltage: 1.25 times rated voltage |
| Final Measurement (after Endurance) | Capacitance change: ɖC/C≤±5% of initial; tgδ increase: ≤0.0020 (10kHz); IR: ≥50% of rated | ||
| Characteristics Dependent on Temperature | Capacitance measurement at points b, d, f | Ref. item 4.2.6 | Lower category temp (-40℃): 0≤(Cb-Cd)/Cd≤+3%; Upper category temp (110℃): -4%≤(Cf-Cd)/Cd≤0 |
| Charging and Discharging | No cracking, no burning | Ref. item 4.13 | Cycles: 10000; Charge duration: 0.5s; Discharge duration: 0.5s; Charging voltage: Rated voltage |
| Final Measurement (after Charging/Discharging) | Capacitance: ɖC/C≤±5% of initial; tgδ increase: ≤0.0030 (10KHz, 0.1V); Dielectric Strength: 1.6UR; IR: ≥50% of rated | ||
| Pulse Voltage | No cracking, no burning | Cycles: 24; Pulse voltage: 1.8UR | |
| Final Measurement (after Pulse Voltage) | Capacitance change: ɖC/C≤±5%; tgδ increase: ≤0.0020 (10kHz); IR: ≥50% of rated; Dielectric Strength: 1.6UR | ||
| Ripple Current | No cracking, no burning | Ripple current: 10A; DC bias: Rated voltage - ripple voltage; Test time: 5 hours; Test frequency: 100KHZ | |
| Final Measurement (after Ripple Current) | Capacitance change: ɖC/C≤±10%; tgδ increase: ≤0.0030(10kHz, 0.1V) or ≤0.0030(1kHz, 1V); IR: ≥50% of rated; Dielectric Strength: 1.6UR | ||
| Flammability Test | IEC695-2-2 Needle Flame Test | Flammability Class C, exposed to flame once. Burn time after flame removal: not more than 30s. Droppings should not ignite cotton paper underneath. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!