Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 100nF |
| Operating Temperature | -40℃~+100℃ |
| Tolerance | ±5% |
| Voltage Rating | 400V |
| Description | 100nF Film Capacitor ±5% 400V Through Hole P=7.5mm |
| Mfr. Part # | KP104J2G0701 |
| Package | Through Hole,P=7.5mm |
| Model Number | KP104J2G0701 |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Capacitance | 100nF | Operating Temperature | -40℃~+100℃ |
| Tolerance | ±5% | Voltage Rating | 400V |
| Description | 100nF Film Capacitor ±5% 400V Through Hole P=7.5mm | Mfr. Part # | KP104J2G0701 |
| Package | Through Hole,P=7.5mm | Model Number | KP104J2G0701 |
This specification document outlines the details for the MPP (Metallized Polypropylene Film Capacitor, CBB22 Powder Package Type) manufactured by Dongguan City Keya Electronics Technology Co., Ltd. These capacitors are designed for various electronic applications and adhere to strict quality and performance standards.
| CHIEFCON P/N | Customer P/N | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dimensions (mm) W1 | Dimensions (mm) H1 | Dimensions (mm) T1 | Lead Pitch (mm) 0.5 | Lead Diameter (mm) 0.05 | Lead Length (min mm) | Marking |
| KP104J2G0701 | 0.1 | 5 | 400 | 9.0 | 9.0 | 4.5 | 7.5 | 0.6 | 15 | 104J 400V |
| Item | Description | Conditions |
| Scope | This specification applies to KYET MPP/MPR/CBB21/CBB22 Metallized Polypropylene Film Capacitors. | |
| Standard Atmospheric Conditions | Ambient Temperature: 15 to 35 Relative Humidity: 45% to 75% Air Pressure: 86 kPa to 106 kPa | (For doubtful results: Ambient Temp: +20 5, RH: 60% to 70%) |
| Operating Temperature Range | -40 to +100 | Capacitor can be operated continuously at rated voltage. |
| Construction | Dielectric: Metallized Polypropylene Film Metal Spray: Special Solder Lead Wire: Copper-clad Steel Wire (Tinned) Epoxy Resin: UL V-0 Flame Retardant Grade Plastic Case: UL V-0 Flame Retardant Grade | |
| Marking | Manufacturer Symbol (KYET ELECTRONICS CO., LTD), Type (MPP), Class (CBB22), Capacitance (EIA 3-digit code), Tolerance (J, K, M), Rated Voltage, Operating Temperature Range, Dissipation Factor, Insulation Resistance. | |
| Dissipation Factor (DF) | Max 0.1% (at 1KHz, 25) | Measuring Frequency: 2%; Measuring Voltage: 1 Vrms. |
| Insulation Resistance (IR) | CR0.33F: IR10000M CR0.33F: IR5000M/F | UR100V. Test Voltage: 100 VDC. Charge Time: 605 sec. |
| Withstand Voltage (TV) - Between Terminals | Shall be no abnormality | Apply 1.6*Ur (DC) for 60 sec. (Voltage increased at rate 150V/s) |
| Withstand Voltage (TV) - Between Terminals & Enclosure | Shall be no abnormality | Apply 2*Ur+500V for 2 to 5 sec. Min. 1,000VDC |
| Soldering Property | More than 90% of circumferential surface of lead wire shall be covered with new solder. | Soldering temperature: +260 5. Immersion duration: 2 0.5 sec. |
| Terminal Strength (Tensile Strength) | Shall be no abnormality. | Apply 1.0Kg for 10 1 sec. to the terminal in the axial direction. |
| Temperature Cycle | Appearance: Shall be no remarkable change Withstand Voltage: Shall satisfy NO.5.1 Capacitance Change Rate: Within 5% Dissipation Factor: 0.002 (0.2%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 | Total 5 cycles: (+20 for 3min, -40 for 10min, +20 for 3min, +100 for 10min, +20 for 3min). After test, allow 1.5 0.5 Hrs. at ordinary condition. |
| Dry Heat Resistance | Appearance: Shall be no remarkable change Withstand Voltage: Shall satisfy NO.5.1 Capacitance Change Rate: Within 5% Dissipation Factor: 0.002 (0.2%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 | Test Temperature: +100 2. Test Duration: 16 1 hrs. |
| Cold Resistance | Appearance: Shall be no remarkable change Withstand Voltage: Shall satisfy NO.5.1 Capacitance Change Rate: Within 5% Dissipation Factor: 0.002 (0.2%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 | Test Temperature: -40 3. Test Duration: 2 1 hrs. |
| Damp Heat | Appearance: Shall be no remarkable change | Test Temperature: +40 2. Test Humidity: 90% to 95% R.H. Test Duration: 2 1 hrs. After test, allow 1.5 0.5 Hrs. at ordinary condition. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!