Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 12nF |
| Operating Temperature | -40℃~+105℃ |
| Tolerance | ±5% |
| Voltage Rating | 1kV |
| Description | 12nF Film Capacitor ±5% 1kV Through Hole P=10mm |
| Mfr. Part # | MMKP123J3A1001 |
| Package | Through Hole,P=10mm |
| Model Number | MMKP123J3A1001 |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Capacitance | 12nF | Operating Temperature | -40℃~+105℃ |
| Tolerance | ±5% | Voltage Rating | 1kV |
| Description | 12nF Film Capacitor ±5% 1kV Through Hole P=10mm | Mfr. Part # | MMKP123J3A1001 |
| Package | Through Hole,P=10mm | Model Number | MMKP123J3A1001 |
The MMKP82 is a double-sided metallized polypropylene film capacitor (box-type) from Dongguan Keya Electronic Technology Co., LTD. It features excellent flame resistance, low loss, and a negative temperature coefficient of capacitance. This capacitor is widely used in high-voltage, high-frequency pulse circuits, electronic ballasts, compact lamps, and SNUBBER and SCR commutating circuits.
| Item | Performance Requirement | Test Method | Details |
|---|---|---|---|
| Applicable Temperature Range | -40 +105 | GB/T 10190 (IEC 60384-16) | |
| Rated Voltage (UR) | 400VDC/630VDC/1000VDC/1250VDC/1600VDC/2000VDC/3000VDC | ||
| Capacitance Range | 0.00221.8 F | ||
| Capacitance Tolerance | 2%(G), 3%(H), 5%(J), 10%(K) | Ref. item 4.2.2 | 1kHz |
| Dissipation Factor (tg) | 0.0010 | Ref. item 4.2.3 | (20, 1KHz, 0.1V) |
| Withstand Voltage | 1.6UR, 5s | Ref. item 4.2.1 | No breakdown or arcing |
| Insulation Resistance (IR) | IR50000M, CN0.33 F; IR30000, CN>0.33 F | Ref. item 4.2.4 | (100V, 20, 1min) |
| Solderability | Good tin plating | Ref. item 4.5 | Soldering bath method Tb, method 1A (leakage current set to 20mA), Solder temperature: 2352, Immersion time: 2.00.5s |
| Lead Strength (Tensile) | 0.5 d0.8mm, 10N; 1.0 d1.2mm, 20N | Ref. item 4.3 | |
| Lead Strength (Bending) | 0.5 d0.8mm, 5N; 1.0 d1.2mm, 10N | Ref. item 4.3 | Two consecutive bends in each direction |
| Resistance to Soldering Heat | No visible damage, clear marking | Ref. item 4.4 | Soldering bath method Tb, method 1A, 2605, 101s |
| Rapid Change of Temperature | No visible damage, clear marking | Ref. item 4.6 | QA=-40, QB=+105, 5 cycles, duration: t=30min |
| Climatic Sequence (Dry Heat, Cyclic Damp Heat, Cold) | No visible damage, clear marking | Ref. item 4.10.2, 4.10.3, 4.10.4, 4.10.6 | +105, 16h (Dry Heat); Test Db, Severity b (Cyclic Damp Heat); -40, 2h (Cold); UR applied for 1 min after test. |
| Damp Heat (Steady State) | No obvious bulging, clear marking | Ref. item 4.11 | Temperature: 85, Humidity: 85%RH, Duration: 48H |
| Endurance | No visible damage, clear marking | Ref. item 4.12 | +85, 1000h, Applied voltage: 1.25 times rated voltage |
| Characteristics with Temperature Variation | Ref. item 4.2.6 | At points b, d, f. Lower category temp (-40): 0(Cb-Cd)/Cd+3%. Upper category temp (110): -4%(Cf-Cd)/Cd0. Charging voltage is rated voltage. Static method, capacitor held at each temperature sequentially. | |
| Charge and Discharge | No cracking, no burning. | Ref. item 4.13 | Cycles: 10000. Charging time: 0.5s. Discharging time: 0.5s. Charging voltage is rated voltage. Charging resistance: 220/CR (). Discharging resistance: 10/CR() or 20 (whichever is greater). CR is nominal capacitance ( F). |
| Pulse Voltage | No cracking, no burning. | Cycles: 24. Pulse voltage: 1.8UR. | |
| Ripple Current | No cracking, no burning. | Ripple current: 10A. DC bias = rated voltage - ripple voltage. Test time: 5 hours. Test frequency: 100KHZ. | |
| Flame Retardancy Test | IEC695-2-2 Needle Flame Test, Flame resistance category C | After leaving flame, any capacitor's continuous burning time not exceeding 30S, and the dripping of the capacitor shall not ignite the cotton paper laid underneath. |
If the working voltage (U) is lower than the rated voltage (UR), the capacitor can operate at a higher dV/dt. The allowable dV/dt value should be obtained by multiplying the right table value with UR/U.
| UR(V) | dV/dt(v/s) for P=7.5 | dV/dt(v/s) for P=10.0 | dV/dt(v/s) for P=15.0 | dV/dt(v/s) for P=22.5 | dV/dt(v/s) for P=27.5 |
|---|---|---|---|---|---|
| 250 | 1200 | 1000 | 550 | 250 | 200 |
| 400 | 1800 | 1500 | 900 | 500 | 300 |
| 630 | 3200 | 3200 | 2500 | 1500 | 900 |
| 1000 | 6000 | 6000 | 3300 | 2100 | 1000 |
| 1600 | ------- | ------- | 6000 | 3000 | 2000 |
| 2000 | ------- | ------- | 10000 | 5000 | 2200 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!