Beijing Silk Road Enterprise Management Services Co., Ltd.
| Current Rating | 3A |
| Number of Circuits | - |
| DC Resistance(DCR) | 50mΩ |
| Tolerance | ±25% |
| Impedance @ Frequency | 120Ω@100MHz |
| Description | 50mΩ ±25% 120Ω@100MHz 0805 Ferrite Beads and Chips RoHS |
| Mfr. Part # | XRCB2012U121-3R0TF |
| Package | 0805 |
| Model Number | XRCB2012U121-3R0TF |
View Detail Information
Explore similar products
Multilayer Ferrite Chip Beads for EMI Suppression Chilisin BBUP00321611121Y00
Compact multilayer chip ferrite beads FH CBM201209U181T for EMI RFI noise
High Current Multilayer Chip Ferrite Beads FH CBM201209U220T Suitable for SMT
Multilayer chip ferrite beads FH CBM160808U220T designed for EMI RFI suppression
Product Specification
| Current Rating | 3A | Number of Circuits | - |
| DC Resistance(DCR) | 50mΩ | Tolerance | ±25% |
| Impedance @ Frequency | 120Ω@100MHz | Description | 50mΩ ±25% 120Ω@100MHz 0805 Ferrite Beads and Chips RoHS |
| Mfr. Part # | XRCB2012U121-3R0TF | Package | 0805 |
| Model Number | XRCB2012U121-3R0TF |
This specification applies to the ACMS-2012 series Ferrite Chip EMI suppressors, designed for effective noise suppression.
| PART NO. | DESCRIPTION | DIMENSION (mm) | OPERATING TEMP. RANGE | STORAGE TEMP. RANGE | IMPEDANCE () AT 100 MHz | DC RESISTANCE () Max | RATED CURRENT (mA) Max |
| XRCB2012U121-3R0TF | Ferrite Chip EMI Suppressors | L: 2.00.2, W: 1.250.2, T: 0.9+0.15/-0.2, A: 0.2~0.8 | -55 ~ +125 | -10 ~ +40 | 12025% | 0.05 | 3000 |
| ITEM | Specification | TEST CONDITIONS |
| TERMINAL STRENGTH | Without deformation cases impedance shall be satisfied 30% DC resistance shall be satisfied. | Solder chip on PCB and applied 10N (1.02Kgf) for 10 sec. |
| Substrate bending test | Without deformation cases, impedance shall be satisfied 30% DC resistance shall be satisfied. | After soldering a chip to a test substrate, bend the substrate by 3mm hold for 10s and then return. with the recommended PC board pattern and reflow soldering. |
| RESISTANCE TO SOLDER HEAT | No visible damage Electrical characteristics and mechanical characteristics shall be satisfied. | Consult standard MIL-STD-202 METHOD 210 Solder Temp. : 2653 Immersion time : 61 sec Preheating : 100 to 150, 1 minute. Measurement to be made after keeping at room temp for 242 hrs. Solder : Sn-3Ag-0.5Cu |
| SOLDER-ABILITY | 95% min. coverage of all metabolised area | Consult standard J-STD-002 Solder temp. : 2405 Immersion time : 31 sec Solder : Sn-3Ag-0.5Cu |
| TEST TYPE | Performance Specification | Test Condition |
| HIGH TEMPERATURE RESISTANCE | Appearance: no mechanical damage Impedance: with 30% of initial value DC resistance: satisfied | Temperature: 1252 Applied current: Rated current Testing time: 100812hrs Measurement: After room ambient temp. for 24 hours minimum |
| HUMIDITY RESISTANCE | Appearance: no mechanical damage Impedance: within 30% of initial value DC resistance: satisfied | Humidity: 90 to 95% RH Temperature: 602 Applied current: Rated current Testing time: 100812hours Measurement: After room ambient temp. for 24 hours minimum |
| TEMPERATURE CYCLE | Appearance: no mechanical damage Impedance: within 30% of initial value DC resistance: satisfied | Temperature: -55,+125 (30 min each) Cycle: 100 cycles Measurement: After room ambient temp. for 24 hours minimum |
| LOW TEMPERATURE STORAGE LIFE TEST | Appearance: no mechanical damage Impedance: with 30% of initial value DC resistance: satisfied | Temperature: -552 Testing time: 100812hours Measurement: After room ambient temp. for 24 hours minimum |
| THERMAL SHOCK | Appearance: no mechanical damage Impedance: with 30% of initial value | Temperature: -55,+125 (30 min each) Cycle: 100 cycles Measurement: After room ambient temp. for 24 hours minimum |
| VIBRATION TEST | Appearance: no mechanical damage Impedance: with 30% of initial value | Waveform: Sine wave Frequency: 10~55~10 Hz Sweep time: 1min Amplitude: 1.5mm(peak-peak) Direction: X,Y,Z (3 axes) Duration: 2 hrs./axis, total 6 hrs. |
| ITEM | Dimensions (mm) | Details |
| PAPER CARRIER TAPE PACKAGING | A: 1.450.05, B: 2.250.05, C: 8.00.1, D: 3.50.05, E: 1.750.1, F: 4.00.1, G: 2.00.05, H: 4.00.1, J: 1.550.05, T: 0.950.05 | Leader and trailer tape, Direction, Reels |
| REELS | Packing Qty: 4,000 PCS/REEL | |
| PEELING STRENGTH OF COVER TAPE | 10g~100g, 165~180 peel angle, 300mm/min peel speed | |
| PACKAGING | Tape & Reel packaging, Reel and desiccant in Nylon/plastic bag, Max 5 bags/inner box, Max 6 inner box/outer box | |
| REEL LABEL | Indicate Pb Free, RoHS Compliant | |
| STORAGE | Store at 40 or less and 70% RH or less. Avoid dust, harmful gas, heat, and direct sunlight. Use reels as soon as possible after opening. Solderability valid for 6 months under specified storage conditions. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!