Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 10nF |
| Tolerance | ±5% |
| Voltage Rating | 630V |
| Description | 10nF Film Capacitor ±5% 630V Through Hole P=7.5mm |
| Mfr. Part # | MPP103J2JB050C3T0ZR |
| Package | Through Hole,P=7.5mm |
| Model Number | MPP103J2JB050C3T0ZR |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Capacitance | 10nF | Tolerance | ±5% |
| Voltage Rating | 630V | Description | 10nF Film Capacitor ±5% 630V Through Hole P=7.5mm |
| Mfr. Part # | MPP103J2JB050C3T0ZR | Package | Through Hole,P=7.5mm |
| Model Number | MPP103J2JB050C3T0ZR |
The CBB21/MPP series metallized polypropylene film capacitors are designed for electronic equipment with epoxy encapsulation. These capacitors feature a non-inductive winding structure with metallized polypropylene film and tinned copper wire or tinned copper-clad steel wire leads. They are widely used for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits. Key advantages include excellent self-healing properties, low loss, and low internal temperature rise, with a flame-retardant epoxy resin powder coating for encapsulation.
| Model | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dissipation Factor (DF) (1KHz) | Dimensions (mm) (L*W*H) | Pitch (mm) | Lead Diameter (mm) |
|---|---|---|---|---|---|---|---|
| MPP103J2JB050C3T0ZR | 0.01 | 5% | 630 | 0.1% | 9.5*8.5*5 | 7.5 | 0.6 |
| Parameter | Specification | Test Conditions |
|---|---|---|
| Climate Category | 40/105/21 | - |
| Operating Temperature Range | -40 to +105 | (Derating factor 1.25% / for +85 to +105) |
| Rated Temperature | 85 | - |
| Capacitance Range | 0.001F to 6.8F | - |
| Capacitance Tolerance | 5%(K), 10%(M) | - |
| Rated Voltage (VDC) | 100, 160, 250, 400, 630, 1000, 1250, 1600, 2000 | - |
| Dissipation Factor (DF) | 0.0010 | 1kHz, 20 |
| Insulation Resistance | 30,000 M (for C0.33uF) | 100VDC, 60s |
| Insulation Resistance | 10,000 M*uF (for C>0.33uF) | 100VDC, 60s |
| Withstand Voltage | 1.6 UR(VDC) | 5s |
| UR (VDC) | P=7.5 (V/s) | P=10.0 (V/s) | P=15.0 (V/s) | P=22.5 (V/s) | P=27.5 (V/s) |
|---|---|---|---|---|---|
| 100/160 | 130 | 110 | 100 | 70 | 50 |
| 250 | 240 | 220 | 200 | 120 | 100 |
| 400 | 450 | 350 | 300 | 180 | 150 |
| 630 | 550 | 420 | 400 | 250 | 180 |
| 1000/1250 | 2300 | 1950 | 975 | 600 | 300 |
| 1600 | / | 6000 | 4500 | 2400 | / |
| 2000 | / | / | 8000 | 4500 | / |
Note: If actual working voltage (U) is lower than rated voltage (UR), the allowable dV/dt value should be multiplied by UR/U.
| No. | Main Material | Description | Remarks |
|---|---|---|---|
| 1 | Metallized Polypropylene Film | MPPZAH | -/- |
| 2 | Sprayed Metal Layer | Zinc-tin alloy wire | -/- |
| 3 | Leads | Tinned copper-clad steel wire | -/- |
| 4 | Outer Encapsulation Material | Epoxy resin powder | Flame retardant UL94V-0 |
| 5 | Inner Protective Material | Epoxy resin | - |
All raw materials and finished products comply with RoHS environmental requirements.
| Item | Dimensions (L*W*H) |
|---|---|
| Inner Carton | 34.5*23.5*24.5 cm |
| Outer Carton | 49*36*27 cm |
Carton Packing Details: Includes manufacturer part number, package count and quantity per package, Lot No. Capacitors are packed in transparent PVC bags for moisture and dust protection. RoHS environmental mark included. Other customer marking requirements are accommodated.
General Test Conditions: Ambient temperature: 1535, Relative humidity: 25%75%. For any questions regarding test results, use: Ambient temperature: 202, Relative humidity: 60%70%.
| No. | Item | Characteristic | Test Method |
|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength | No visible mechanical damage. Lead diameter: 0.6 & 0.8mm. Load: 10N, Time: 10s. |
| Bending Strength | Lead diameter: 0.6 & 0.8mm. Force: 5N, 90 2 times. | ||
| 2 | Solderability | - | Tinning rate of leads 95%. Soldering temperature: 2455. Immersion time: 2.50.5s. |
| 3 | Soldering Heat Resistance | Appearance | No visible damage. Soldering temperature: 2605. Immersion time: 101s. Recovery time: 1-2 hours. |
| DF Increase | 0.004 (C1.0F, 10kHz); 0.004 (C>1.0F, 1kHz) | ||
| Capacitance Change | C/C 3% | ||
| 4 | Temperature Rapid Change | Appearance | No visible damage. A=-40, B=+105, 5 cycles. Duration: t=30min. |
| Vibration | No visible damage. Amplitude 0.75mm or acceleration 98m/s (whichever is less severe), frequency 10-500Hz. Three directions, mutually perpendicular, 2h per direction, total 6h. | ||
| Shock | No visible damage. 4000 times, acceleration 390m/s, pulse duration: 6ms. | ||
| Final Measurement | Appearance | No visible damage. | |
| Capacitance Change | C/C 5% | ||
| DF Increase | 0.004 | ||
| Insulation Resistance | IR/IR 50% | ||
| 5 | Climatic Sequence | Appearance | No visible damage. Dry heat +105, 16h; Cyclic damp heat Test Db, first cycle; Cold -40, 2h; Low air pressure 8.5kPa, 1h (no permanent breakdown, arcing or harmful deformation of the case); Cyclic damp heat Test Db, remaining cycles. |
| Capacitance Change | C/C 5% | ||
| DF Increase | 0.005 | ||
| Insulation Resistance | IR/IR 50% | ||
| 6 | Damp Heat, Steady State | Appearance | No visible damage. Relative humidity 90-95%RH, Temperature: 402, No load, Duration: 21 days. Recovery time: 1-2 hours. |
| Capacitance Change | C/C 5% | ||
| DF Increase | 0.002 (C1.0F, 10kHz); 0.004 (C>1.0F, 1kHz) | ||
| Insulation Resistance | IR/IR 50% | ||
| 7 | Endurance | Appearance | No visible damage. T=85, 1000 hours. Applied voltage: 1.25UR. |
| Capacitance Change | C/C 8% | ||
| DF Increase | 0.004 | ||
| Insulation Resistance | IR/IR 50% | ||
| 8 | Characteristics Dependent on Temperature | Capacitance measurement at points b, d, f | Static method, capacitor held sequentially at each temperature: a.(202), b.(-403), d.(20 2), f.(1052), g.(202). |
| At lower category temperature -40 | 0 (Cb-Cd)/Cd +3% | ||
| At upper category temperature 105 | -4.0% (Cf-Cd)/Cd 0 | ||
| 9 | Charge and Discharge | Capacitance Change | C/C 5% |
| - | Charge/discharge cycles: 10,000. Charging time: 0.5s. Discharging time: 0.5s. Charging voltage: Rated voltage UR. Charging resistance: 220/CR (). Discharging resistance: 10/CR or 20 (whichever is greater). CR: Rated capacitance (uF). | ||
| DF Increase | 0.005 (10KHz, CR1.0uF); 0.005 (1KHz, CR>1.0uF) | ||
| Insulation Resistance | IR/IR 50% |
Note: The typical values in the curve diagram are tested under conditions of sinusoidal voltage, ambient temperature 85, and capacitor internal temperature rise T=10.
(Diagram content not provided in the source text)
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!