Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 1uF |
| Tolerance | ±5% |
| Voltage Rating | 100V |
| Description | 1uF ±5% 100V Through Hole,P=5mm Film Capacitors RoHS |
| Mfr. Part # | MPE105J2AM050B200ZR |
| Package | Through Hole,P=5mm |
| Model Number | MPE105J2AM050B200ZR |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Capacitance | 1uF | Tolerance | ±5% |
| Voltage Rating | 100V | Description | 1uF ±5% 100V Through Hole,P=5mm Film Capacitors RoHS |
| Mfr. Part # | MPE105J2AM050B200ZR | Package | Through Hole,P=5mm |
| Model Number | MPE105J2AM050B200ZR |
The CL21/MPE series capacitors are epoxy-encapsulated, metallized polyester film capacitors designed for electronic equipment. Featuring a non-inductive winding structure with tin-plated copper-clad steel leads, these capacitors are sealed with flame-retardant epoxy resin powder. They are widely used in DC, pulse, and switching circuits, as well as DC filtering circuits in electronic ballasts and frequency converters. Key advantages include small size, good self-healing properties, and a flame-retardant coating.
| Model/Part Number | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dissipation Factor (DF) (1KHz) | Dimensions (mm) W (1.0) | Dimensions (mm) H (1.0) | Dimensions (mm) T (1.0) | Lead Pitch (1.0) | Lead Length (Min) | Lead Diameter (d 0.05) |
|---|---|---|---|---|---|---|---|---|---|---|
| MPE105J2AM050B200ZR | 1.0 | 5% | 100 | 1.0% | 6.3 | 9.8 | 5.3 | 5.0 | 20 | 0.6 |
| Parameter | Specification | Test Method/Conditions |
|---|---|---|
| Climate Category | 55/105/21 | |
| Operating Temperature Range | -55~+105 (Voltage derating of 1.25%/ above +85) | |
| Rated Temperature | 85 | |
| Capacitance Range | 0.01F10F | |
| Capacitance Tolerance | 5%(K), 10%(M), 20%(M) | |
| Rated Voltage | 63Vdc, 100Vdc, 160Vdc, 250Vdc, 400Vdc, 630Vdc | |
| Dissipation Factor (DF) | 0.01 (1kHz, 20) | |
| Insulation Resistance (IR) | U100VDC: 3750M for C0.33uF (10VDC, 60s); 1250M*uF for C>0.33uF (10VDC, 60s) U>100VDC: 7500M for C0.33uF (100VDC, 60s); 2500M*uF for C>0.33uF (100VDC, 60s) | |
| Withstand Voltage | 1.6UR(VDC), 5 seconds | |
| Max. Pulse Rise Rate (dV/dt) | Refer to table in source document for values based on UR and lead pitch. Formula: Allowed dV/dt = Table Value (UR/U) | |
| Terminal Strength (Tensile) | No visible mechanical damage | Wire dia: 0.6&0.8mm; Load: 10N, Time: 10s |
| Terminal Strength (Bending) | No visible mechanical damage | Wire dia: 0.6&0.8mm; Force: 5N, 902 times |
| Solderability | 95% tinning rate on leads | Flux temp: 2455; Immersion time: 2.50.5s |
| Soldering Heat Resistance | Appearance: No visible damage DF increase: 0.005 (C1.0F, 10kHz); 0.003 (C>1.0F, 1kHz) Capacitance change: C/C2% | Solder temp: 2605; Immersion time: 101s; Recovery time: 1-2 hours |
| Rapid Change of Temperature | Appearance: No visible damage | A=-40, B=+105, 5 cycles; Duration: t=30min |
| Vibration | Appearance: No visible damage | Amplitude 0.75mm or acceleration 98m/s (whichever is smaller), Frequency 10-500Hz, 3 directions, 2h each, total 6h |
| Shock | Appearance: No visible damage | 4000 times, acceleration 390m/s, Pulse duration: 6ms |
| Climate Sequence | Appearance: No visible damage Capacitance change: C/C5% DF increase: 0.005 (C1.0F, 10kHz); 0.003 (C>1.0F, 1kHz) Insulation Resistance change: IR/IR50% | Dry heat +105, 16h; Cyclic damp heat (Test Db, 1st cycle); Cold -40, 2h; Low pressure 8.5kPa, 1h; Cyclic damp heat (Test Db, remaining cycles) |
| Steady State Damp Heat | Appearance: No visible damage Capacitance change: C/C5% DF increase: 0.005 Insulation Resistance change: IR/IR50% | RH 90-95%, Temp: 402, No load, Duration: 21 days; Recovery time: 1-2 hours |
| Endurance | Appearance: No visible damage Capacitance change: C/C8% DF increase: 0.003 (C1.0F, 10kHz); 0.002 (C>1.0F, 1kHz) Insulation Resistance change: IR/IR50% | T=85, 1000 hours; Applied voltage: 1.25UR |
| Characteristics Dependent on Temperature | At points b, d, f: -40: 0(Cb-Cd)/Cd+3% 105: -4.0%(Cf-Cd)/Cd0 | Static method, capacitor held sequentially at temperatures: a.(202), b.(-403), d.(20 2), f.(1052), g.(202) |
| Charge/Discharge | Capacitance change: C/C5% DF increase: 0.003 (10KHz, CR1.0uF); 0.002 (1KHz, CR>1.0uF) Insulation Resistance change: IR/IR50% | Cycles: 10,000; Charge time: 0.5s; Discharge time: 0.5s; Charge voltage: UR; Charge resistance: 220/CR (); Discharge resistance: 10/CR or 20 (whichever is larger) |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!