Beijing Silk Road Enterprise Management Services Co., Ltd.
| Description | Through Hole,P=7.5mm Film Capacitors RoHS |
| Mfr. Part # | MPP154J2SB05HC3F0ZR-H09 |
| Package | Through Hole,P=7.5mm |
| Model Number | MPP154J2SB05HC3F0ZR-H09 |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Description | Through Hole,P=7.5mm Film Capacitors RoHS | Mfr. Part # | MPP154J2SB05HC3F0ZR-H09 |
| Package | Through Hole,P=7.5mm | Model Number | MPP154J2SB05HC3F0ZR-H09 |
The CBB21/MPP series capacitors are metallized polypropylene film capacitors with an impregnated, non-inductive wound structure. They feature a flame-retardant epoxy powder coating and are designed for various electronic applications. These capacitors are suitable for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits. Key advantages include excellent self-healing properties, low loss, and reduced internal temperature rise.
| Model/Product Code | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dissipation Factor (DF) (1KHz) (%) | Dimensions (mm) (W*H*T) | Pitch (P) (mm) | Lead Length (L) (mm) | Lead Diameter (d) (mm) |
|---|---|---|---|---|---|---|---|---|
| MPP154J2SB05HC3F0ZR-H09 | 0.15 | 5 | 450 | 0.1 | 8.9*8.8*4.9 | 7.5 1.0 | 3.5 0.5 | 0.6 0.05 |
| Parameter | Specification |
|---|---|
| Climate Category | 40/105/21 |
| Operating Temperature Range | -40~+105 (+85~+105: Rated voltage derating 1.25% / ) |
| Rated Temperature | 85 |
| Capacitance Range | 0.001F6.8F |
| Capacitance Tolerance | 5%(J), 10%(K) |
| Rated Voltage (VDC) | 100, 160, 250, 400, 630, 1000, 1250, 1600, 2000 |
| Dissipation Factor (DF) (1kHz, 20) | 0.0010 |
| Insulation Resistance | 30,000M for C0.33uF (100VDC , 60 seconds) 10000M*uF for C>0.33uF (100VDC , 60 seconds) |
| Withstand Voltage | 1.6UR(VDC), 5 seconds |
If the actual working voltage (U) is lower than the rated voltage (UR), the capacitor can operate at a higher dV/dt. The allowable dV/dt value should be multiplied by UR/U.
| dV/dt (V/s) | UR (VDC) | P=7.5 | P=10.0 | P=15.0 | P=22.5 | P=27.5 |
|---|---|---|---|---|---|---|
| 100/160 | 130 | 110 | 100 | 70 | 50 | |
| 250 | 240 | 220 | 200 | 120 | 100 | |
| 400/450 | 350 | 300 | 180 | 150 | ||
| 630 | 550 | 420 | 400 | 250 | 180 | |
| 1000/1250 | 2300 | 1950 | 975 | 600 | 300 | |
| 1600 / 6000 | 4500 | 2400 | / | / | ||
| 2000 / 8000 | 4500 | / | / |
| No. | Main Material | Description | Remarks |
|---|---|---|---|
| 1 | Metallized Polypropylene Film | MPPZAH | -/- |
| 2 | Sprayed Gold Layer | Zinc-tin alloy wire | -/- |
| 3 | Leads | Tin-plated copper clad steel wire | -/- |
| 4 | Outer Encapsulation Material | Epoxy resin powder | Flame-retardant UL94V-0 |
| 5 | Inner Protective Material | Epoxy resin |
| Inner Box Dimensions (L*W*H) | 34.5*23.5*24.5 cm |
| Outer Box Dimensions (L*W*H) | 49*36*27 cm |
| Packaging Details | Includes: Manufacturer's part number, number of packages and quantity per package, Lot No. Capacitors are packaged in transparent PVC bags for moisture and dust protection. RoHS environmental mark. Other customer marking requirements. |
| Temperature | 35 Max |
| Relative Humidity | 80% Max |
| Storage Time | Maximum 12 months (based on production date marked on the packaging bag) |
| No. | Item | Characteristic | Test Method |
|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength | No visible mechanical damage. Wire diameter: 0.6 & 0.8mm. Load: 10N, Time: 10 seconds. |
| Bending Strength | Wire diameter: 0.6 & 0.8mm. Force: 5N, 902 times. | ||
| 2 | Solder Adhesion | Tinning rate of leads 95% | Soldering temperature: 2455. Immersion time: 2.50.5 seconds. |
| 3 | Solderability Heat Resistance | Appearance | No visible damage. Soldering temperature: 2605. Immersion time: 101 seconds. Recovery time: 1-2 hours. |
| Increase in Dissipation Factor | 0.004 (C1.0F, 10kHz) 0.004 (C>1.0F, 1kHz) | ||
| Capacitance Change | C/C 3% | ||
| 4 | Initial Measurement | Capacitance (1KHz) | DF 0.001 (1kHz, 20) |
| Dissipation Factor | CR1F: Test Frequency 10kHz. CR>1F: Test Frequency 1kHz. | ||
| Temperature Rapid Change | Appearance | No visible damage. A=-40, B=+105, 5 cycles. Duration: t=30min. | |
| Vibration | Appearance | No visible damage. Amplitude 0.75mm or acceleration 98m/s (whichever is less severe), Frequency 10~500Hz. Three directions, mutually perpendicular, 2h per direction, total 6h. | |
| Shock | Appearance | No visible damage. 4000 times, acceleration 390m/s, pulse duration: 6ms. | |
| Final Measurement | Appearance | No visible damage. | |
| Capacitance Change | C/C 5% | ||
| Increase in Dissipation Factor | 0.004 | ||
| Insulation Resistance | IR/IR 50% | ||
| 5 | Initial Measurement | Capacitance (1KHz) | DF 0.001 (1kHz, 20) |
| Dissipation Factor | CR1F: Test Frequency 10kHz. CR>1F: Test Frequency 1kHz. | ||
| Climatic Sequence | Dry Heat | +105, 16 hours. | |
| Cyclic Damp Heat | Test Db, first cycle. | ||
| Cold | -40, 2 hours. | ||
| Low Pressure | No permanent breakdown, arcing, or harmful deformation of the casing; 8.5kPa, 1 hour. | ||
| Cyclic Damp Heat | Test Db, remaining cycles. | ||
| Final Measurement | Appearance | No visible damage. | |
| Capacitance Change | C/C 5% | ||
| Increase in Dissipation Factor | 0.005 | ||
| Insulation Resistance | IR/IR 50% | ||
| 6 | Steady State Damp Heat | Appearance | No visible damage. Relative humidity 9095%RH. Temperature: 402. No load, duration: 21 days. Recovery time: 1-2 hours. |
| Capacitance Change | C/C 5% | ||
| Increase in Dissipation Factor | 0.002 (C1.0F, 10kHz) 0.004 (C>1.0F, 1kHz) | ||
| Insulation Resistance | IR/IR 50% | ||
| 7 | Endurance | Appearance | No visible damage. T=85, 1000 hours. Applied voltage: 1.25UR. |
| Capacitance Change | C/C 8% | ||
| Increase in Dissipation Factor | 0.004 | ||
| Insulation Resistance | IR/IR 50% | ||
| 8 | Charge/Discharge | Capacitance Change | C/C 5% |
| Charge/Discharge Cycles | 10,000. Charging time: 0.5 seconds. Discharging time: 0.5 seconds. Charging voltage: Rated voltage UR. Charging resistance: 220/CR (). Discharging resistance: 10/CR or 20 (whichever is larger). CR: Rated capacitance (uF). | ||
| Increase in Dissipation Factor | 0.005 (10KHz, CR1.0uF). 0.005 (1KHz, CR>1.0uF). | ||
| Insulation Resistance | IR/IR 50% |
Note: The curve diagram represents typical values tested under conditions of sinusoidal voltage, ambient temperature 85, and internal capacitor temperature rise T=10.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!