Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 470nF |
| Tolerance | ±5% |
| Voltage Rating | 400V |
| Description | 470nF Film Capacitor ±5% 400V Through Hole P=15mm |
| Mfr. Part # | MPP474J2GD070B200ZR |
| Package | Through Hole,P=15mm |
| Model Number | MPP474J2GD070B200ZR |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Capacitance | 470nF | Tolerance | ±5% |
| Voltage Rating | 400V | Description | 470nF Film Capacitor ±5% 400V Through Hole P=15mm |
| Mfr. Part # | MPP474J2GD070B200ZR | Package | Through Hole,P=15mm |
| Model Number | MPP474J2GD070B200ZR |
The CBB22/MPP series metallized polypropylene film capacitors are designed for electronic equipment, featuring an epoxy-encapsulated, non-inductive wound structure. These capacitors are ideal for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits. They offer excellent self-healing properties due to their metallized polypropylene film construction, low loss, and minimal internal temperature rise. The capacitors are sealed with flame-retardant epoxy resin powder for durability and safety.
| Model/Part Number | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dissipation Factor (DF) (1KHz) (%) | Dimensions (mm) (W x H x T) | Pitch (P) (mm) | Lead Diameter (d) (mm) |
|---|---|---|---|---|---|---|---|
| MPP474J2GD070B200ZR | 0.47 | 5% | 400 | 0.1 | 16.5 x 14.0 x 7.0 | 15.0 1.0 | 0.8 0.05 |
| Parameter | Specification | Test Condition |
|---|---|---|
| Climate Category | 40/105/21 | N/A |
| Operating Temperature Range | -40 to +105 | (Voltage derating factor 1.25%/ from +85 to +105) |
| Rated Temperature | 85 | N/A |
| Capacitance Range | 0.001F to 6.8F | N/A |
| Capacitance Tolerance | 5%(K), 10%(M) | N/A |
| Rated Voltage (VDC) | 100, 160, 250, 400, 630, 1000, 1250, 1600, 2000 | N/A |
| Dissipation Factor (DF) | 0.0010 | 1kHz, 20 |
| Insulation Resistance | 30,000M (for C0.33uF) | 100VDC, 60s |
| Insulation Resistance | 10000M*uF (for C>0.33uF) | 100VDC, 60s |
| Withstand Voltage | 1.6 UR(VDC) | 5s |
If actual working voltage (U) is lower than rated voltage (UR), the capacitor can operate at higher dV/dt. The allowable dV/dt value should be multiplied by UR/U.
| dV/dt (V/s) | UR (VDC) | P=7.5mm | P=10.0mm | P=15.0mm | P=22.5mm | P=27.5mm |
|---|---|---|---|---|---|---|
| 100/160 | 130 | 110 | 100 | 70 | 50 | |
| 250 | 240 | 220 | 200 | 120 | 100 | |
| 400 | 450 | 350 | 300 | 180 | 150 | |
| 630 | 550 | 420 | 400 | 250 | 180 | |
| 1000/1250 | 2300 | 1950 | 975 | 600 | 300 | |
| 1600 | / | 6000 | 4500 | 2400 | / | |
| 2000 | / | / | 8000 | 4500 | / |
| No. | Main Material | Description | Remarks |
|---|---|---|---|
| 1 | Metallized Polypropylene Film | MPPZAH | -/- |
| 2 | Sprayed Metal Layer | Zinc-tin alloy wire | -/- |
| 3 | Lead Wire | Tinned copper clad steel wire | -/- |
| 4 | Outer Encapsulation Material | Epoxy resin powder | Flame retardant UL94V-0 |
| 5 | Inner Protective Material | Epoxy resin | N/A |
| Item | Details |
|---|---|
| Inner Box Dimensions (L*W*H) | 34.5*23.5*24.5 cm |
| Outer Box Dimensions (L*W*H) | 49*36*27 cm |
| Box Contents | Manufacturer P/N, quantity per bag, Lot No. |
| Capacitor Packaging | Transparent PVC bag for moisture and dust protection |
| Labeling | RoHS logo, other customer-specific markings |
Unless otherwise specified, tests are conducted within standard atmospheric conditions: Ambient Temperature: 1535, Relative Humidity: 25%75%. For disputed results, tests are performed under: Ambient Temperature: 202, Relative Humidity: 60%70%.
| No. | Item | Characteristic | Test Method |
|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength | No visible mechanical damage. Load: 10N, Time: 10s (for wire diameter 0.6 & 0.8mm). |
| Bending Strength | 5N force, 90 x 2 times (for wire diameter 0.6 & 0.8mm). | ||
| 2 | Solderability | Tinning rate of leads 95% | Solder temperature: 2455, Immersion time: 2.50.5s. |
| 3 | Soldering Heat Resistance | Appearance | No visible damage. Solder temperature: 2605, Immersion time: 101s. Recovery time: 1-2 hours. |
| DF Increase | 0.004 (C1.0F, 10kHz); 0.004 (C>1.0F, 1kHz). | ||
| Capacitance Change | C/C 3% | ||
| 4 | Rapid Change of Temperature | Appearance | No visible damage. Cycles: 5 times (A=-40, B=+105). Duration: 30min per temp. |
| Vibration | No visible damage. Amplitude 0.75mm or acceleration 98m/s (whichever is lower), Frequency 10-500Hz, 3 directions, 2h each, total 6h. | ||
| Shock | No visible damage. 4000 times, acceleration 390m/s, pulse duration 6ms. | ||
| Final Measurement | Appearance | No visible damage. | |
| Capacitance Change | C/C 5% | ||
| DF Increase | 0.004 | ||
| Insulation Resistance | IR/IR 50% | ||
| 5 | Climatic Sequence | Appearance | No visible damage. Test Db cycles: Dry Heat (+105, 16h), Cold (-40, 2h), Damp Heat (Test Db, remaining cycles). Low Pressure (8.5kPa, 1h): No permanent breakdown, arcing, or harmful deformation. |
| Capacitance Change | C/C 5% | ||
| DF Increase | 0.005 | ||
| Insulation Resistance | IR/IR 50% | ||
| 6 | Damp Heat (Steady State) | Appearance | No visible damage. Relative Humidity: 90-95%RH, Temperature: 402, Duration: 21 days. Recovery time: 1-2 hours. |
| Capacitance Change | C/C 5% | ||
| DF Increase | 0.002 (C1.0F, 10kHz); 0.004 (C>1.0F, 1kHz). | ||
| Insulation Resistance | IR/IR 50% | ||
| 7 | Endurance | Appearance | No visible damage. Temp: 85, Time: 1000 hours. Applied Voltage: 1.25UR. |
| Capacitance Change | C/C 8% | ||
| DF Increase | 0.004 | ||
| Insulation Resistance | IR/IR 50% | ||
| 8 | Characteristics Dependent on Temperature | Capacitance measurement at points b, d, f. | Static method. Capacitors held sequentially at specified temperatures: a.(202), b.(-403), d.(20 2), f.(1052), g.(202). |
| At lower category temperature (-40) | 0 (Cb-Cd)/Cd +3% | ||
| At upper category temperature (105) | -4.0% (Cf-Cd)/Cd 0 | ||
| 9 | Charge/Discharge | Capacitance Change | C/C 5%. Cycles: 10,000. Charge time: 0.5s. Discharge time: 0.5s. Charge voltage: UR. Charge resistance: 220/CR (). Discharge resistance: 10/CR or 20 (whichever is greater). CR: Rated capacitance (uF). |
| DF Increase | 0.005 (10KHz, CR1.0uF); 0.005 (1KHz, CR>1.0uF). | ||
| Insulation Resistance | IR/IR 50% |
Note: Typical values are tested under conditions of sinusoidal voltage, ambient temperature 85, and internal temperature rise T=10.
(Diagrams not provided in text)
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!