Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 220nF |
| Tolerance | ±5% |
| Voltage Rating | 250V |
| Description | 220nF Film Capacitor ±5% 250V Through Hole P=15mm |
| Mfr. Part # | MPP224J2ED050C040ZR |
| Package | Through Hole,P=15mm |
| Model Number | MPP224J2ED050C040ZR |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Capacitance | 220nF | Tolerance | ±5% |
| Voltage Rating | 250V | Description | 220nF Film Capacitor ±5% 250V Through Hole P=15mm |
| Mfr. Part # | MPP224J2ED050C040ZR | Package | Through Hole,P=15mm |
| Model Number | MPP224J2ED050C040ZR |
The CBB21/MPP series capacitors are designed for electronic equipment, featuring an epoxy-encapsulated metallized polypropylene film construction with a non-inductive winding structure. These capacitors are suitable for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits. They offer excellent self-healing properties, low loss, and low internal temperature rise, with a flame-retardant epoxy resin powder coating.
| Model | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dissipation Factor (DF) (1KHz) (%) | Dimensions (mm) L (2.0) | Dimensions (mm) W (max) | Dimensions (mm) H (max) | Dimensions (mm) T (max) | Dimensions (mm) P (1.0) | Lead Diameter (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| MPP224J2ED050C040ZR | 0.22 | 5 | 250 | 0.1 | 16 | 8.6 | 4.6 | 15.0 | 4.0 | 0.6 |
| Parameter | Specification | Test Method |
|---|---|---|
| Climate Category | 40/105/21 | |
| Operating Temperature Range | -40 to +105 (+85 to +105: Rated Voltage Derating 1.25% / ) | |
| Rated Temperature | 85 | |
| Capacitance Range | 0.001F to 6.8F | |
| Capacitance Tolerance | 5% (K), 10% (K) | |
| Rated Voltage | 100Vdc, 160Vdc, 250Vdc, 400Vdc, 630Vdc, 1000Vdc, 1250Vdc, 1600Vdc, 2000Vdc | |
| Loss Tangent (DF) | 0.0010 (1kHz, 20) | |
| Insulation Resistance | 30,000 M for C0.33uF (100VDC, 60 seconds) 10,000 M*uF for C>0.33uF (100VDC, 60 seconds) | |
| Withstand Voltage | 1.6 UR(VDC), 5 seconds | |
| Maximum Pulse Rise Rate (dV/dt) | Refer to table in original document for specific UR and P values. |
| No. | Main Material | Description | Remarks |
|---|---|---|---|
| 1 | Metallized Polypropylene Film | MPPZAH | -/- |
| 2 | Sprayed Tin Layer | Zinc-tin alloy wire | -/- |
| 3 | Leads | Tin-plated copper clad steel wire | -/- |
| 4 | Outer Encapsulation Material | Epoxy resin powder | Flame retardant UL94V-0 |
| 5 | Inner Protective Material | Epoxy resin |
| Item | Details |
|---|---|
| Inner Carton Dimensions (L*W*H) | 34.5*23.5*24.5 cm |
| Outer Carton Dimensions (L*W*H) | 49*36*27 cm |
| Carton Contents | Manufacturer's part number, package count, quantity per package, Lot No. |
| Packaging Method | Capacitors packaged in transparent PVC bags for moisture and dust protection. |
| Environmental Mark | RoHS |
| Parameter | Condition |
|---|---|
| Temperature | Max 35 |
| Relative Humidity | Max 80% |
| Storage Time | Maximum 12 months (based on production date marked on the packaging bag) |
| No. | Item | Characteristic | Test Method | |
|---|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength | No visible mechanical damage. Load: 10N, Time: 10 seconds. | |
| Bending Strength | Force: 5N, 90 2 times. | |||
| 2 | Solderability | Tinning rate of leads 95% | Soldering temperature: 2455, Immersion time: 2.50.5 seconds. | |
| 3 | Solder Heat Resistance | Appearance | No visible damage. Soldering temperature: 2605, Immersion time: 101 seconds. Recovery time: 1-2 hours. | |
| Dissipation Factor Increase | 0.004 (C1.0F, 10kHz); 0.004 (C>1.0F, 1kHz) | |||
| Capacitance Change | C/C3% | |||
| 4 | Initial Measurement | Capacitance (1KHz), Dissipation Factor | CR1F: Test frequency 10kHz; CR>1F: Test frequency 1kHz | |
| Temperature Rapid Change | Appearance | No visible damage. A=-40, B=+105, 5 cycles. Duration: t=30min. | ||
| Vibration | Appearance | No visible damage. Amplitude 0.75mm or acceleration 98m/s (whichever is less), frequency 10-500Hz, 3 directions, 2h each direction, total 6h. | ||
| Shock | Appearance | No visible damage. 4000 times, acceleration 390m/s, pulse duration: 6ms. | ||
| Final Measurement | Appearance | No visible damage. Capacitance Change: C/C5%. Dissipation Factor Increase: 0.004. Insulation Resistance: IR/IR50%. | ||
| 5 | Initial Measurement | Capacitance (1KHz), Dissipation Factor | CR1F: Test frequency 10kHz; CR>1F: Test frequency 1kHz | |
| Climatic Sequence | Appearance | No visible damage. Dry Heat +105, 16 hours; Cyclic Damp Heat Test Db, first cycle; Cold -40, 2 hours; Low Pressure 8.5kPa, 1 hour. Cyclic Damp Heat Test Db, remaining cycles. | ||
| Low Pressure | No permanent breakdown, arcing or harmful deformation of the casing. | |||
| Final Measurement | Appearance | No visible damage. Capacitance Change: C/C5%. Dissipation Factor Increase: 0.005. Insulation Resistance: IR/IR50%. | ||
| 6 | Damp Heat (Steady State) | Appearance | No visible damage. Relative Humidity 90-95%RH, Temperature: 402, No load, Duration: 21 days. Recovery time: 1-2 hours. | |
| Capacitance Change | C/C5% | |||
| Dissipation Factor Increase | 0.002 (C1.0F, 10kHz); 0.004 (C>1.0F, 1kHz) | |||
| Insulation Resistance | IR/IR50% | |||
| 7 | Endurance | Appearance | No visible damage. T=85, 1000 hours. Applied Voltage: 1.25UR. | |
| Capacitance Change | C/C8% | |||
| Dissipation Factor Increase | 0.004 | |||
| Insulation Resistance | IR/IR50% | |||
| 8 | Characteristic with Temperature | Capacitance measurement at points b, d, f. | Static method, capacitor held sequentially at each temperature: a.(202), b.(-403), d.(20 2), f.(1052), g.(202). | |
| Characteristic at lower category temperature -40: | 0(Cb-Cd)/Cd+3% | |||
| Characteristic at upper category temperature 105: | -4.0%(Cf-Cd)/Cd0 | |||
| 9 | Charge/Discharge | Capacitance Change | C/C5% | |
| Dissipation Factor Increase | 0.005 (10KHz, CR1.0uF); 0.005 (1KHz, CR>1.0uF) | |||
| Insulation Resistance | IR/IR50% |
| Category | Details |
|---|---|
| Usage Range | Do not exceed the upper category temperature. Avoid overload. Do not exceed maximum pulse current. |
| Operation Precautions | Avoid repeated squeezing at the lead root. Pay attention to lead tips. |
| Soldering | Confirm soldering temperature within the following ranges: (1) Wave Soldering: TP110 for 120 seconds; Ts120 for 45 seconds. For MPP polypropylene film capacitors with P7.5mm, T4mm, wave soldering time < 4 seconds. (2) Soldering Iron: Tip temperature not exceeding 350, time not exceeding 3 seconds. (3) Lead film capacitors are not suitable for reflow soldering. Ts: Maximum temperature the capacitor body can withstand during wave soldering. Tp: Maximum preheating temperature the capacitor body can withstand. |
Note: The curve represents typical values tested under conditions of sinusoidal voltage, ambient temperature 85, and internal capacitor temperature rise T=10.
Diagrams are available in the original document.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!