Beijing Silk Road Enterprise Management Services Co., Ltd.
| Description | Through Hole,P=7.5mm Film Capacitors RoHS |
| Mfr. Part # | MPP154J2GB040C050ZR |
| Package | Through Hole,P=7.5mm |
| Model Number | MPP154J2GB040C050ZR |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Description | Through Hole,P=7.5mm Film Capacitors RoHS | Mfr. Part # | MPP154J2GB040C050ZR |
| Package | Through Hole,P=7.5mm | Model Number | MPP154J2GB040C050ZR |
The CBB22/MPP series capacitors are metallized polypropylene film, non-inductive wound capacitors designed for electronic equipment. They feature a flame-retardant epoxy powder coating and are suitable for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits. These capacitors offer excellent self-healing properties, low loss, and low internal temperature rise.
| Model/Part Number | Capacitance (uF) | Tolerance (%) | Rated Voltage (V.dc) | Dielectric Loss (DF) (1KHz) | Dimensions (mm) (L*W*H*P) | Lead Pitch (mm) | Thickness Code | Environmental Code |
|---|---|---|---|---|---|---|---|---|
| MPP154J2GB040C050ZR | 0.33 | 5 | 400 | 0.1 | 8.7*7.1*4.1*7.5 | 7.5 | 04 | 050ZR |
| Parameter | Specification | Test Conditions |
|---|---|---|
| Climate Category | 40/105/21 | |
| Operating Temperature Range | -40 ~ +105 | (+85 ~ +105: Rated voltage derating 1.25% / ) |
| Rated Temperature | 85 | |
| Capacitance Range | 0.001F ~ 6.8F | |
| Capacitance Tolerance | 5% (J), 10% (K) | |
| Rated Voltage | 100Vdc/160Vdc, 250Vdc, 400Vdc, 630Vdc, 1000Vdc, 1250Vdc, 1600 Vdc, 2000 Vdc | |
| Dissipation Factor (DF) | 0.0010 | (1kHz, 20) |
| Insulation Resistance | 30,000M for C0.33uF | (100VDC, 60 seconds) |
| Insulation Resistance | 10000M*uF for C>0.33uF | (100VDC, 60 seconds) |
| Withstand Voltage | 1.6 UR(VDC) | 5 seconds |
| Max. Pulse Rise Time (dV/dt) | Refer to table | (UR(VDC) vs P=7.5, 10.0, 15.0, 22.5, 27.5) |
| Terminal Strength (Tensile) | No visible mechanical damage | Wire dia: 0.6&0.8mm, Load: 10N, Time: 10 sec |
| Terminal Strength (Bending) | No visible mechanical damage | Wire dia: 0.6&0.8mm, Force: 5N, 902 times |
| Solderability | 95% tinning rate on leads | Flux temp: 2455, Immersion time: 2.50.5 sec |
| Solder Heat Resistance | Appearance: No visible damage | Solder temp: 2605, Immersion time: 101 sec. Recovery time: 1-2 hours |
| Solder Heat Resistance | DF increase 0.004 (C1.0F, 10kHz) / 0.004 (C>1.0F, 1kHz) | |
| Solder Heat Resistance | Capacitance change C/C3% | |
| Rapid Temperature Change | Appearance: No visible damage | A=-40, B=+105, 5 cycles, Duration: 30 min |
| Vibration | Appearance: No visible damage | Amplitude 0.75mm or Accel. 98m/s (whichever is less), Freq: 10-500Hz, 3 directions, 2h each, total 6h |
| Shock | Appearance: No visible damage | 4000 times, Accel. 390m/s, Pulse duration: 6ms |
| Endurance (Steady State Damp Heat) | Appearance: No visible damage | RH: 90-95%RH, Temp: 402, Duration: 21 days. Recovery time: 1-2 hours |
| Endurance (Steady State Damp Heat) | Capacitance change C/C5% | |
| Endurance (Steady State Damp Heat) | DF increase 0.002 (C1.0F, 10kHz) / 0.004 (C>1.0F, 1kHz) | |
| Endurance (Steady State Damp Heat) | Insulation Resistance IR/IR50% | |
| Endurance (Accelerated) | Appearance: No visible damage | T=85, 1000 hours, Applied Voltage: 1.25UR |
| Endurance (Accelerated) | Capacitance change C/C8% | |
| Endurance (Accelerated) | DF increase 0.004 | |
| Endurance (Accelerated) | Insulation Resistance IR/IR50% | |
| Characteristics Dependent on Temperature | 0(Cb-Cd)/Cd+3% at -40 | Static method, capacitor held at specified temperatures (a:202, b:-403, d:202, f:1052, g:202) |
| Characteristics Dependent on Temperature | -4.0%(Cf-Cd)/Cd0 at 105 | |
| Charge/Discharge | Capacitance change C/C5% | Charge/Discharge cycles: 10,000. Charging time: 0.5 sec. Discharging time: 0.5 sec. Charging voltage: UR. Charging resistance: 220/CR (). Discharging resistance: 10/CR or 20 (whichever is greater). CR: Rated capacitance (uF). |
| Charge/Discharge | DF increase 0.005 (10KHz, CR1.0uF) / 0.005 (1KHz, CR>1.0uF) | |
| Charge/Discharge | Insulation Resistance IR/IR50% |
Note: Typical values in the curve are tested under sinusoidal voltage, ambient temperature 85, and internal capacitor temperature rise T=10.
(Diagrams not provided in text)
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!