Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 680nF |
| Tolerance | ±5% |
| Voltage Rating | 450V |
| Description | 680nF ±5% 450V Through Hole Film Capacitors RoHS |
| Mfr. Part # | MPP684J2SC05HB200ZR-H16 |
| Package | Through Hole |
| Model Number | MPP684J2SC05HB200ZR-H16 |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Capacitance | 680nF | Tolerance | ±5% |
| Voltage Rating | 450V | Description | 680nF ±5% 450V Through Hole Film Capacitors RoHS |
| Mfr. Part # | MPP684J2SC05HB200ZR-H16 | Package | Through Hole |
| Model Number | MPP684J2SC05HB200ZR-H16 |
The CBB21/MPP series capacitors are metallized polypropylene film capacitors with an epoxy encapsulated, non-inductive winding structure. They feature a self-healing capability, low loss, and low internal temperature rise. These capacitors are suitable for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits. They are widely used in electronic equipment.
| Parameter | Specification | Test Method/Condition |
|---|---|---|
| Product Type | CBB21/MPP Metallized Polypropylene Film Capacitor (Impregnated Type) | |
| Model/Part Number | MPP684J2SC05HB200ZR-H16 | |
| Nominal Capacitance | 0.68 F 5% | |
| Rated Voltage | 450 V.dc | |
| Dimensions (L*W*H) | 12*16.5*5.5 mm (approximate) | |
| Climate Category | 40/105/21 | |
| Operating Temperature Range | -40 to +105 | (Derating factor 1.25% / for +85 to +105) |
| Rated Temperature | 85 | |
| Capacitance Range | 0.001F to 6.8F | |
| Capacitance Tolerance | 5% (K), 10% (M) | |
| Rated Voltage Options | 100Vdc, 160Vdc, 250Vdc, 400Vdc, 450Vdc, 520Vdc, 630Vdc, 800Vdc, 1000Vdc, 1200Vdc, 1250Vdc, 1600Vdc, 2000Vdc, 2500Vdc, 3000Vdc | |
| Dissipation Factor (DF) | 0.0010 (1kHz, 20) | |
| Insulation Resistance | 30,000 M for C 0.33F (100VDC, 60s) | |
| Insulation Resistance (cont.) | 10,000 M*F for C > 0.33F (100VDC, 60s) | |
| Dielectric Strength | 1.6 UR(VDC), 5 seconds | |
| Max. Pulse Rise Rate (dV/dt) | Refer to chart in document (dependent on UR and lead pitch) | |
| Terminal Strength (Tensile) | No visible mechanical damage | Wire diameter: 0.6 & 0.8mm; Load: 10N, Time: 10 seconds |
| Terminal Strength (Bending) | No visible damage | Wire diameter: 0.6 & 0.8mm; Force: 5N, 90 2 times |
| Solderability | 95% tinning rate on leads | Flux temp: 2455, Immersion time: 2.50.5s |
| Soldering Heat Resistance | No visible damage | Solder temp: 2605, Immersion time: 101s, Recovery time: 1-2 hours |
| Capacitance Change (Soldering Heat) | C/C 3% | |
| DF Increase (Soldering Heat) | 0.004 (C1.0F, 10kHz); 0.004 (C>1.0F, 1kHz) | |
| Vibration Resistance | No visible damage | Amplitude 0.75mm or acceleration 98m/s, Frequency 10-500Hz, 2h per direction (3 directions) |
| Impact Resistance | No visible damage | 4000 times, acceleration 390m/s, pulse duration 6ms |
| Capacitance Change (after tests) | C/C 5% | |
| DF Increase (after tests) | 0.004 | |
| Insulation Resistance Change (after tests) | IR/IR 50% | |
| Steady State Damp Heat | No visible damage | RH 90-95%, Temp: 402, 21 days |
| Capacitance Change (Damp Heat) | C/C 5% | |
| DF Increase (Damp Heat) | 0.002 (C1.0F, 10kHz); 0.004 (C>1.0F, 1kHz) | |
| Insulation Resistance Change (Damp Heat) | IR/IR 50% | |
| Endurance Test | No visible damage | 85, 1000 hours, Voltage: 1.25UR |
| Capacitance Change (Endurance) | C/C 8% | |
| DF Increase (Endurance) | 0.004 | |
| Insulation Resistance Change (Endurance) | IR/IR 50% | |
| Charge/Discharge Cycles | No visible damage | 10,000 cycles; Charge time: 0.5s, Discharge time: 0.5s, Charge voltage: UR |
| Capacitance Change (Charge/Discharge) | C/C 5% | |
| DF Increase (Charge/Discharge) | 0.005 (10KHz, CR1.0uF); 0.005 (1KHz, CR>1.0uF) | |
| Insulation Resistance Change (Charge/Discharge) | IR/IR 50% | |
| Storage Conditions | Temperature: Max 35, Relative Humidity: Max 80% | Max storage time: 12 months from production date |
| Soldering Temperature (Wave) | TP 110 for 120s; Ts 120 for 45s | For P7.5mm, T4mm, wave soldering time < 4 seconds |
| Soldering Temperature (Iron) | Tip temp 350, time 3 seconds |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!