Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 1uF |
| Tolerance | ±5% |
| Voltage Rating | 450V |
| Description | 1uF Film Capacitor ±5% 450V Through Hole |
| Mfr. Part # | MPB105J2SC38GC2FR0R |
| Package | Through Hole |
| Model Number | MPB105J2SC38GC2FR0R |
View Detail Information
Explore similar products
interference suppression capacitor CHAMPION MPP475K0160D322818B2815 metallized
Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction
Metallized Polypropylene Film Capacitor KYET KP684J2G1502 Featuring Plastic Case
Metallized polypropylene film capacitor Dersonic CFC2G684JG1I170GBCW1 with flame
Product Specification
| Capacitance | 1uF | Tolerance | ±5% |
| Voltage Rating | 450V | Description | 1uF Film Capacitor ±5% 450V Through Hole |
| Mfr. Part # | MPB105J2SC38GC2FR0R | Package | Through Hole |
| Model Number | MPB105J2SC38GC2FR0R |
The CBB21B(R)/MKPH series are box-type metallized polypropylene film capacitors designed for high-frequency DC and PFC applications in electronic equipment. These capacitors are ideal for coupling, decoupling, and filtering functions, offering a small, non-inductive wound structure. They feature a flame-retardant plastic case and epoxy resin encapsulation, ensuring good dimensional consistency, low loss, and minimal internal temperature rise. Typical applications include switching power supplies requiring DC blocking, filtering, coupling, and bypassing.
Product Code Example: MPB105J2SC38GC2FR0R
Model Specification Example: CBB21B(R)/MKPH 1uF5% 450V.dc (13.016.06.0)
| P/N | Cap (uF) | Tol. % | R.V VDC | DF (1KHz) % | Dimensions (mm) (0.5) | Lead Pitch (P) (0.5) | Lead Diameter (d) 0.05 |
|---|---|---|---|---|---|---|---|
| MPB105J2SC38GC2FR0R | 1 | 5 | 450 | 0.1 | W: 13.0, H: 16.0, T: 6.0 | 10.0 | 0.6 |
| Item | Technical Specification | Standard |
|---|---|---|
| Climatic Category | 40/105/21 | |
| Operating Temperature Range | -40~+105 (+85~+105: Rated voltage derating 1.25% / ) | |
| Rated Temperature | +85 | |
| Capacitance Range | 0.001F15F | |
| Capacitance Tolerance | 5%(J); 10%(K) | |
| Rated Voltage | 160Vdc/90Vac, 250Vdc/160Vac, 400Vdc/220Vac, 630Vdc/250Vac | |
| Dissipation Factor (tan ) | 0.1% (1KHz at 20~25) | |
| Insulation Resistance | 50000M for C0.33uF (100VDC, 60s) 15000M*uF for C>0.33uF (100VDC, 60s) | |
| Withstand Voltage | 1.6UR for 5 seconds | |
| Max. Pulse Rise Time (dV/dt) | Refer to table in source document for specific voltage ratings and lead pitches. |
| No. | Main Material | Description | Remarks |
|---|---|---|---|
| 1 | Metallized Polypropylene Film | MPPA | -/- |
| 2 | Spray Welding Layer | Tin-Zinc Alloy Wire | -/- |
| 3 | Leads | Tinned Copper Wire | -/- |
| 4 | Potting Material | Epoxy Resin | Flame-retardant UL94V-0 |
| 5 | Outer Protection Material | PBT Plastic Case | Flame-retardant UL94V-0 |
General Test Conditions: Ambient temperature 1535, Relative humidity 25%75%. For disputed results: Ambient temperature 202, Relative humidity 60%70%.
| No. | Item | Characteristic | Test Method |
|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength, Bending Strength | Wire diameter: 0.6&0.8mm; Tensile: 10N for 10s; Bending: 5N, 90x2 times. No visible mechanical damage. |
| 2 | Solderability | Tinning Rate | Flux Temp: 2455, Immersion Time: 2.50.5s. Tinning rate 95%. |
| 3 | Soldering Heat Resistance | Appearance, tan increase, Capacitance change | Solder Temp: 2605, Immersion Time: 101s. Restore Time: 1-2h. tan increase 0.004. C/C3%. |
| 4 | Temperature Rapid Change | Appearance | A=-40, B=+105, 5 cycles. Duration: 30min. No visible damage. |
| 5 | Vibration | Appearance | Amplitude 0.75mm or acceleration 98m/s (whichever is smaller), Frequency 10-500Hz, 3 directions, 2h each direction, total 6h. No visible damage. |
| 6 | Impact | Appearance | 4000 times, acceleration 390m/s, pulse duration 6ms. No visible damage. |
| 7 | Sequential Humidity / Temperature Test | Appearance, Capacitance change, tan increase, Insulation Resistance | Dry Heat +105 (16h), Cyclic Damp Heat (Test Db, 1st cycle), Cold -40 (2h), Low Pressure 8.5kPa (1h). Subsequent cycles Damp Heat. Final measurement: Appearance, C/C5%, tan increase 0.005, IR/IR50%. |
| 8 | Damp Heat, Steady State | Appearance, Capacitance change, tan increase, Insulation Resistance | RH 90-95%, Temp: 402, 56 days. Restore Time: 1-2h. Appearance, C/C5%, tan increase 0.002, IR/IR50%. |
| 9 | Endurance | Appearance, Capacitance change, tan increase, Insulation Resistance | T=85, 1000h, applied voltage: 1.25UR. Appearance, C/C8%, tan increase 0.004, IR/IR50%. |
| 10 | Characteristics Dependent on Temperature | Capacitance Measurement | At points b, d, f. Lower limit category temp -40: 0(Cb-Cd)/Cd+3%. Upper limit category temp 105: -4.0%(Cf-Cd)/Cd0. |
| 11 | Charge and Discharge | Capacitance change, tan increase, Insulation Resistance | 10,000 cycles. C/C5%, tan increase 0.005, IR/IR50%. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!