Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -25℃~+105℃ |
| Lifetime | 2000hrs@105℃ |
| Capacitance | 150uF |
| Height - Seated (Max) | 30mm |
| Pin Spacing | - |
| Voltage Rating | 400V |
| Diameter | 25mm |
| Equivalent Series Resistance(ESR) | - |
| Tolerance | ±20% |
| Ripple Current | 830mA@120Hz |
| Description | 150uF ±20% 400V Aluminum Electrolytic Capacitors Through Hole,D25xL30mm 2000hrs@105℃ |
| Mfr. Part # | LS157M400O30RR0VH2SP0 |
| Package | Through Hole,D25xL30mm |
| Model Number | LS157M400O30RR0VH2SP0 |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
Aluminum Electrolytic Capacitor Guangdong TOPAZ Elec Tech ECLJ0612270M080P00 for
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Product Specification
| Operating Temperature | -25℃~+105℃ | Lifetime | 2000hrs@105℃ |
| Capacitance | 150uF | Height - Seated (Max) | 30mm |
| Pin Spacing | - | Voltage Rating | 400V |
| Diameter | 25mm | Equivalent Series Resistance(ESR) | - |
| Tolerance | ±20% | Ripple Current | 830mA@120Hz |
| Description | 150uF ±20% 400V Aluminum Electrolytic Capacitors Through Hole,D25xL30mm 2000hrs@105℃ | Mfr. Part # | LS157M400O30RR0VH2SP0 |
| Package | Through Hole,D25xL30mm | Model Number | LS157M400O30RR0VH2SP0 |
The LS Series Aluminum Electrolytic Capacitors are designed for general-purpose applications requiring reliable performance and a long lifespan. They are suitable for use in circuits where the machine's lifespan is a consideration. These capacitors are manufactured by Dongguan Shi Cheng Xing Electronics Co., Ltd. in China.
| Item | Performance Characteristics | Operating Temperature Range | Rated Working Voltage Range | Nominal Capacitance Range | Capacitance Tolerance | Leakage Current (Max.) | tan (120Hz, +20) | Low Temperature Characteristics (120Hz) | Load Life | Shelf Life |
|---|---|---|---|---|---|---|---|---|---|---|
| Specifications | -40~+105 -25 ~+105 | 10 ~ 250V 350~ 500V | 47~56000 F | +20%(120Hz,+20) | L3 (A) (Measured after 5 minutes application of rated working voltage at +20) | See table below | Z-25 / Z+20: 3-6 Z-40 / Z+20: 15-16 | 2000 Hrs (at 105) | 1000 Hrs (at 105) |
| Voltage (V) | tan (max.) | Capacitance (F) | Dimensions (D x L mm) | Ripple Current (mA/rms at 120Hz, 105) |
|---|---|---|---|---|
| 10 | 0.55 | 2700 | 22*25 | 1.29 |
| 10 | 0.55 | 3300 | 22*30 | 1.57 |
| 16 | 0.50 | 3900 | 22*25 | 1.65 |
| 16 | 0.50 | 4700 | 22*30 | 1.75 |
| 25 | 0.45 | 5600 | 22*35 | 1.98 |
| 25 | 0.45 | 6800 | 22*40 | 2.11 |
| 35 | 0.40 | 8200 | 22*35 | 1.85 |
| 35 | 0.40 | 10000 | 22*40 | 2.65 |
| 50 | 0.35 | 1200 | 22*30 | 1.43 |
| 50 | 0.35 | 1500 | 22*30 | 1.50 |
| 63 | 0.30 | 1800 | 22*35 | 1.77 |
| 63 | 0.30 | 2200 | 22*40 | 2.03 |
| 80 | 0.25 | 2700 | 22*40 | 2.20 |
| 80 | 0.25 | 3300 | 22*45 | 2.33 |
| 100 | 0.20 | 3900 | 25*40 | 2.57 |
| 100 | 0.20 | 4700 | 25*50 | 2.97 |
| 160 | 0.15 | 180 | 22*20 | 0.65 |
| 160 | 0.15 | 220 | 22*25 | 1.00 |
| 200 | 0.15 | 270 | 22*25 | 1.04 |
| 200 | 0.15 | 330 | 22*30 | 1.26 |
| 250 | 0.15 | 390 | 22*30 | 1.29 |
| 250 | 0.15 | 470 | 22*35 | 1.35 |
| 350 | 0.20 | 10000 | 30*45 | 4.05 |
| 350 | 0.20 | 12000 | 35*45 | 4.56 |
| 400 | 0.20 | 15000 | 35*50 | 4.77 |
| 450 | 0.20 | 47000 | 35*45 | 5.36 |
| 500 | 0.20 | 56000 | 35*40 | 5.00 |
Circuit Design: Use within rated performance, avoid high temperature, overcurrent, overvoltage, reverse voltage, frequent charge/discharge. Select capacitors with a lifespan matching the machine. Ensure isolation between capacitor terminals and circuit. Avoid environments with water, oil, condensation, or harmful gases. Protect from direct sunlight, ozone, UV, and radiation. Avoid excessive vibration and shock. Ensure correct PCB hole spacing for installation. Avoid placing heat-generating components near capacitors. For dual-sided PCBs, avoid mounting over unnecessary holes.
Assembly & Installation: Do not allow terminals to short circuit. Avoid contact with water, oil, or condensation. Protect from direct sunlight, ozone, UV, and radiation. Avoid harmful gas environments. Ensure vibration and shock do not exceed specifications. Do not use dropped or deformed capacitors. Ensure correct polarity. Discharge regenerated voltage with a ~1K resistor. For long-term storage, apply voltage through a ~1K resistor.
Soldering: Prevent solder from adhering to non-terminal areas. Follow specified soldering conditions (temperature, time, number of cycles). Do not immerse the capacitor body in solder. Avoid other products falling onto the capacitor during soldering.
Cleaning: Do not clean with detergents. If cleaning is necessary, follow product specifications. Ensure cleaning agent management (conductivity, pH, etc.) and thorough drying to prevent residue.
Fixing Agents: Do not use halogen-containing fixing agents. Ensure no residue between PCB and capacitor. Dry thoroughly before applying fixing agents.
Installation (Screw Type): For vertical mounting, pressure valve must face upwards. For horizontal mounting, pressure valve or positive terminal must face upwards.
Maintenance: Regular checks are required, including visual inspection and performance testing.
Accidents: If the pressure relief valve opens, disconnect power immediately. Keep face away from the vent as hot gas may be ejected. In case of eye contact with ejected gas, rinse immediately with water. Do not ingest electrolyte. Wash skin with soap if electrolyte spills.
Fumigation: Be cautious with halogen-based fumigation for overseas export, as it may cause corrosion. Ensure fumigant does not directly contact products and allow for thorough drying.
Storage: Store indoors at 5-30 with humidity below 75%. Do not store in environments prohibited for use.
Disposal: Puncture or crush and incinerate, or hand over to professional recyclers.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!