Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -40℃~+105℃ |
| Capacitance | 2.2uF |
| Height - Seated (Max) | 11mm |
| Voltage Rating | 50V |
| Diameter | 5mm |
| Description | 2.2uF 50V Aluminum Electrolytic Capacitors Through Hole,D5xL11mm |
| Mfr. Part # | CD1102251HM0511VFL |
| Package | Through Hole,D5xL11mm |
| Model Number | CD1102251HM0511VFL |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
Aluminum Electrolytic Capacitor Guangdong TOPAZ Elec Tech ECLJ0612270M080P00 for
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Product Specification
| Operating Temperature | -40℃~+105℃ | Capacitance | 2.2uF |
| Height - Seated (Max) | 11mm | Voltage Rating | 50V |
| Diameter | 5mm | Description | 2.2uF 50V Aluminum Electrolytic Capacitors Through Hole,D5xL11mm |
| Mfr. Part # | CD1102251HM0511VFL | Package | Through Hole,D5xL11mm |
| Model Number | CD1102251HM0511VFL |
The CD110 series plug-in aluminum electrolytic capacitors offer reliable performance for various applications. Designed for general use, these capacitors feature a black sleeve with white markings and a rated operating temperature range of -40 to +105. They are built with quality materials including aluminum foil, electrolytic paper, and a PVC sleeve, ensuring durability and consistent performance. Key specifications include a capacitance of 33uF, a rated voltage of 400V, and a capacitance tolerance of -20% to +20%. These capacitors are suitable for applications requiring stable electrical characteristics and long-term operation under specified conditions.
| Ours P/N () | Series () | Rated Capacitance () (uF) | Rated Voltage () (V) | Capacitance Tolerance () (%) | Dissipation Factor () (%, max) | Leakage Current () (uA, max) | Surge Voltage () (V) | Equivalent Impedance () (, 20, 100KHz) | Rated Ripple Current () (mA rms) (105, 100KHz) | Durability () (Hrs, at 105) | Diameter (D) (mm) | Height (L) (mm) | Lead Diameter (d) (mm) | Lead Length (F) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CD110 | CD110 | 33 | 400 | -20~+20 | 24 | 436 | 450 | 190 | 2,000 | 13 | 17 | 0.6 | 5.0 |
| D (mm) | 4 | 5 | 6 | 5 | 6 | 8 | 10 | 13 | 16 | 18 | 22 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| L (mm) | 5 | 6 | 5 | 6 | 8 | 10 | 13 | 16 | 18 | 22 | 22 |
| F (mm) | 1.6 | 2.0 | 2.5 | 2.0 | 2.5 | 3.5 | 5.0 | 7.5 | 7.5 | 10 | 10 |
| d (mm) | 0.45 | 0.45 | 0.45 | 0.5 | 0.5 | 0.5 | 0.6 | 0.8 | 1.0 | 1.0 | 1.0 |
| Rated Voltage (VDC) | Temperature Range () |
|---|---|
| 6.3 ~ 500 | -40 ~ +105 |
| Component Name | Material |
|---|---|
| Aluminum Foil | Aluminum |
| Separator Paper | Wood pulp |
| Electrolyte | Ethylene glycol, Ammonium adipate |
| Case | Aluminum |
| Rubber Seal | EPDM rubber |
| Lead Wire | Tinned copper clad steel wire |
| Sleeve | Polyvinyl chloride (PVC) |
| Frequency (Hz) | Coefficient |
|---|---|
| 60Hz | Under 10uF: 0.65; 10C100: 0.70; 100C1000: 0.75; 1,000 up above: 0.80 |
| 120Hz | 1.00 (for all capacitance ranges) |
| 300Hz | Under 10uF: 1.15; 10C100: 1.15; 100C1000: 1.18; 1,000 up above: 1.05 |
| 1KHz | Under 10uF: 1.40; 10C100: 1.40; 100C1000: 1.30; 1,000 up above: 1.12 |
| 10KHz~ | Under 10uF: 1.50; 10C100: 1.50; 100C1000: 1.35; 1,000 up above: 1.15 |
| Product Size DxL(mm) | Bag Quantity per Small Box | Small Boxes per Outer Box | Total Pieces per Outer Box | Small Box Dimensions (mm) | Outer Box Dimensions (mm) |
|---|---|---|---|---|---|
| 13*17 | 200 | 16 | 3200 | 290*225*295 | 470*315*320 |
| No. | Item | Test Conditions/Method | Judgment Standard |
|---|---|---|---|
| 1 | Electrostatic Capacitance (CAP) | Test circuit: Series equivalent circuit; Test frequency: 120Hz; Test voltage: Within the error range of rated capacitance. | Within the error range specified in Table-1. |
| 2 | Dissipation Factor (DF) | Less than or equal to the dissipation factor value in Table-1. | |
| 3 | Leakage Current (LC) | Apply rated DC voltage across the capacitor with a 100010 series resistor for 2 minutes, then measure leakage current. | Less than or equal to the leakage current value in Table-1. |
| 4 | Surge Voltage | At 15~35, apply surge voltage through a protection resistor of (10050)/CR (K). Charge for 305 sec, discharge for 5.50.5 min per cycle, for 1000 cycles. | Capacitance change rate: within 15% of initial value; Dissipation factor: not greater than specification; Leakage current: not greater than specification; Appearance: no visible abnormality. |
| 5 | Temperature Characteristics | Test temperatures: 255, -253, -403, +1053. Time to reach thermal stability at each stage. | Impedance ratio (Stage 2,3 vs Stage 1): not exceeding values in the table; Capacitance change rate (vs Stage 1): within 25%; Dissipation factor: not exceeding 5 times specification; Leakage current: not exceeding specification. |
| 6 | Lead Tensile Strength | Apply specified tensile force to capacitor leads for 101 sec. | See table for tensile strength values (N {kgf}) based on lead diameter (mm). No obvious appearance change, no lead breakage or loosening. |
| 7 | Lead Bending Strength | Fix capacitor vertically, apply specified bending force to leads. Rotate 90 degrees in one direction and back, then 90 degrees in the opposite direction and back, as one cycle. | No obvious appearance change, no lead breakage or loosening. |
| 8 | Vibration Test | 2 hours per direction on a vibration table, total 6 hours. Frequency range: 10~55Hz. Amplitude: 1.5mm. Sweep rate: approx. 1 min from 10 to 55 and back to 10 Hz. | Capacitance test: stable value; Capacitance change: within 5% of initial value; Appearance: no appearance defects. |
| 9 | Solderability | Dip capacitor terminals in 25% rosin solution for 5~10 sec, then immerse in solder at 2455 up to 1.5~2.0mm from the capacitor body. | Approximately 90% of the immersed lead surface area should be covered with new tin. |
| 10 | Soldering Heat Resistance | Immerse leads below 1.5~2.0mm from the body in solder at 2605 or 35010 for 101 sec or 3~4 sec respectively. Remove and place in normal temperature/humidity for 1~2 hours before measurement. | Capacitance change rate: within 10% of initial value; Dissipation factor: not greater than specification; Leakage current: not greater than specification; Appearance: no significant appearance abnormality. |
| 11 | Stable Humidity Heat | Place in an environment of 405 and 90~95% RH for 2408 hours. Then place in normal temperature/humidity for 1~2 hours before measurement. | Capacitance change rate: within 20% of initial value; Dissipation factor: not exceeding 1.2 times specification; Leakage current: not exceeding specification; Appearance: no significant appearance abnormality. |
| 12 | Temperature Rapid Change | Place capacitor in a thermal shock chamber. Temperature cycle: +25 (3min) -40 (30min) +25 (3min) +105 (30min) +25 (3min). Perform 5 cycles. Then place in normal temperature/humidity for 1~2 hours before measurement. | Capacitance change rate: within 10% of initial value; Dissipation factor: not greater than specification; Leakage current: not greater than specification; Appearance: no significant appearance abnormality. |
| 13 | Durability | Apply rated voltage and ripple current at the upper limit temperature for the rated life. Then place in standard environment for 1~2 hours. | Capacitance change rate: within 20% of initial value; Dissipation factor: not exceeding 2 times specification; Leakage current: not exceeding specification; Appearance: no significant appearance abnormality. |
| 14 | High Temperature Storage | Store in an environment of 1052 without voltage for 1000+48/-0 hours. Recover for 16 hours before measurement. | Capacitance change rate: within 20% of initial value; Dissipation factor: not exceeding 2 times specification; Leakage current: not exceeding specification; Appearance: no significant appearance abnormality. |
| 15 | Explosion-proof | a) AC Power Test Method: Apply 0.7 times rated voltage or 250V AC (whichever is lower) at 50 or 60 Hz. b) DC Power Test Method: Apply 1A current for diameter 22.4mm; 10A current for diameter > 22.4mm, with reverse DC voltage. | Explosion-proof valve opens without flame. If the internal explosion-proof valve does not open after 30 minutes of applied voltage, the performance is considered satisfactory. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!