Beijing Silk Road Enterprise Management Services Co., Ltd.
| Lifetime | 2000hrs@105℃ |
| Operating Temperature | -40℃~+105℃ |
| Capacitance | 2200uF |
| Height - Seated (Max) | 25mm |
| Pin Spacing | 5mm |
| Voltage Rating | 35V |
| Diameter | 13mm |
| Equivalent Series Resistance(ESR) | 28mΩ@100kHz |
| Tolerance | ±20% |
| Ripple Current | 3.02A@100kHz |
| Description | 2200uF 35V Aluminum Electrolytic Capacitors Through Hole,D13xL25mm |
| Mfr. Part # | CD2882281VM1325VFL |
| Package | Through Hole,D13xL25mm |
| Model Number | CD2882281VM1325VFL |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
Aluminum Electrolytic Capacitor Guangdong TOPAZ Elec Tech ECLJ0612270M080P00 for
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Product Specification
| Lifetime | 2000hrs@105℃ | Operating Temperature | -40℃~+105℃ |
| Capacitance | 2200uF | Height - Seated (Max) | 25mm |
| Pin Spacing | 5mm | Voltage Rating | 35V |
| Diameter | 13mm | Equivalent Series Resistance(ESR) | 28mΩ@100kHz |
| Tolerance | ±20% | Ripple Current | 3.02A@100kHz |
| Description | 2200uF 35V Aluminum Electrolytic Capacitors Through Hole,D13xL25mm | Mfr. Part # | CD2882281VM1325VFL |
| Package | Through Hole,D13xL25mm | Model Number | CD2882281VM1325VFL |
The HRK-QR-QC-17 is a plug-in type aluminum electrolytic capacitor, series CD288, designed for high-frequency, low-impedance applications. It features a green sleeve with gold lettering, indicating its polarity. This capacitor operates reliably within a wide temperature range of -40 to +105 and is suitable for applications requiring stable performance under varying conditions. Key characteristics include a rated voltage of 35V, a capacitance of 2200uF, and a low equivalent impedance of 0.028 at 100KHz. Its robust construction and adherence to industry standards make it a dependable choice for electronic circuits.
| Supplier P/N | Series | Rated Capacitance (uF) | Rated Voltage (V) | Capacitance Tolerance (%) | Dissipation Factor (tan, max %) | Leakage Current (uA, max) | Surge Voltage (V) | Equivalent Impedance (, 20, 100KHz) | Rated Ripple Current (mA rms) (105, 100KHz) | Durability (Hrs, at 105) | Diameter (mm) | Height (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HRK-QR-QC-17 | CD288 | 2200 | 35 | -20~+20 | 14 | 770 | 35 | 0.028 | 3020 | 2000 | 13 | 25 |
| Item | Test Condition/Method | Judgment Standard |
|---|---|---|
| Capacitance (CAP) | Test Frequency: 120Hz; Test Voltage: Rated capacitance error range | Within error range specified in Table-1 |
| Dissipation Factor (DF) | Less than or equal to the dissipation factor tangent value in Table-1 | |
| Leakage Current (LC) | Apply rated working voltage across the capacitor in the test circuit shown below, in series with a 100010 resistor, measure leakage current after 2 minutes. | Less than or equal to the leakage current value in Table-1 |
| Surge Voltage | At 15~35 normal temperature and humidity, apply surge voltage to the capacitor through a protective resistor of (10050)/CR (K), charge for 305 seconds, discharge for 5.50.5 minutes as one cycle, for 1000 cycles. | Capacitance change rate: within 15% of initial value; Dissipation factor: not greater than specification value; Leakage current: not greater than specification value; Appearance: no visible abnormal appearance. |
| Temperature Characteristics | Stage 1: 255; Stage 2: -253; Stage 3: -403; Stage 4: 255; Stage 5: +1053 (Time to reach thermal stability at each stage) | Impedance ratio (Stage 2, 3 vs Stage 1): not exceeding specified values; Capacitance change rate (vs Stage 1): not exceeding 25%; Dissipation factor: not exceeding 5 times specification value; Leakage current: not exceeding specification value. |
| Lead Pull Strength | Apply tensile force as shown in the table to the capacitor leads and hold for 101 seconds. | Lead diameter (mm): 0.45, 0.5, 0.6, 0.8, 1.0; Tensile Strength N {kgf}: 5 {0.51}, 10 {1.0}, 20 {2.0} |
| Lead Bend Strength | Fix the capacitor vertically on a jig and apply the tensile force shown in the table to the leads. Rotate 90 degrees to one side and return to the original position within 2~3 seconds, then rotate 90 degrees in the opposite direction and return to the original position as one cycle. | No obvious appearance change, no lead breakage or loosening. |
| Vibration Test | 2 hours in each direction on a vibration test stand, total 6 hours. Frequency range: 10~55Hz; Amplitude: 1.5mm; Vibration speed: approx. 1 minute from 10 to 55 and back to 10 Hz. | Capacitance test: stable test value; Capacitance change: within 5% of initial value; Appearance: no abnormal appearance. |
| Solderability | Dip the capacitor terminals into a rosin solution (25% by weight) for 5~10 seconds, then immerse in solder at 2455 until about 1.5~2.0mm from the capacitor body. | The surface area of the leads immersed in solder should be covered with new tin by more than 90%. |
| Resistance to Soldering Heat | Immerse the terminals below 1.5~2.0mm from the body into solder solution at 2605 or 35010, hold for 101 or 3~4 seconds respectively, then remove. Measure after placing in normal temperature and humidity for 1~2 hours. | Capacitance change rate: within 10% of initial value; Dissipation factor: not greater than specification value; Leakage current: not greater than specification value; Appearance: no significant abnormal appearance. |
| Stable Damp Heat | Place in an environment of 405 and 90~95% relative humidity for 2408 hours, then place in normal temperature and humidity for 1~2 hours before measurement. | Capacitance change rate: within 20% of initial value; Dissipation factor: not exceeding 1.2 times specification value; Leakage current: not greater than specification value; Appearance: no significant abnormal appearance. |
| Rapid Temperature Change | Place the capacitor in a thermal shock chamber. Temperature changes according to the cycle: +25 (3min) -40 (30min) +25 (3min) +105 (30min) +25 (3min). After 5 cycles, place in normal temperature and humidity for 1~2 hours before measurement. | Capacitance change rate: within 10% of initial value; Dissipation factor: not greater than specification value; Leakage current: not greater than specification value; Appearance: no abnormal appearance. |
| Durability | Apply rated voltage and ripple current at the upper limit temperature according to the rated life, then place in standard environment for 1~2 hours. | Capacitance change rate: within 20% of initial value; Dissipation factor: not exceeding 2 times specification value; Leakage current: not greater than specification value; Appearance: no significant abnormal appearance. |
| High Temperature Storage | Store at 1052 without voltage for 1000+48/-0 hours, then recover for 16 hours before measurement. | Capacitance change rate: within 20% of initial value; Dissipation factor: not exceeding 2 times specification value; Leakage current: not greater than specification value; Appearance: no significant abnormal appearance. |
| Anti-explosion | a) AC power test method: Apply 0.7 times rated voltage at 50 or 60 Hz, or 250V AC, whichever is smaller. b) DC power test method: For diameter 22.4mm, apply 1A current; for diameter > 22.4mm, apply 10A current reverse DC voltage. | The explosion-proof valve should open without flame; if the explosion-proof valve does not open within 30 minutes of applied voltage, the performance is considered satisfactory. |
This company guarantees that all or part of the products, including but not limited to products and packaging, delivered directly or indirectly to your company (including your company's subsidiaries and affiliates) do not contain the following substances:
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!