Beijing Silk Road Enterprise Management Services Co., Ltd.
| Lifetime | 2000hrs@105℃ |
| Operating Temperature | -40℃~+105℃ |
| Capacitance | 2.2uF |
| Height - Seated (Max) | 11mm |
| Voltage Rating | 50V |
| Diameter | 5mm |
| Tolerance | ±20% |
| Description | 2.2uF 50V Aluminum Electrolytic Capacitors Through Hole,D5xL11mm |
| Mfr. Part # | ERE1H2R2M051100B |
| Package | Through Hole,D5xL11mm |
| Model Number | ERE1H2R2M051100B |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
Aluminum Electrolytic Capacitor Guangdong TOPAZ Elec Tech ECLJ0612270M080P00 for
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Product Specification
| Lifetime | 2000hrs@105℃ | Operating Temperature | -40℃~+105℃ |
| Capacitance | 2.2uF | Height - Seated (Max) | 11mm |
| Voltage Rating | 50V | Diameter | 5mm |
| Tolerance | ±20% | Description | 2.2uF 50V Aluminum Electrolytic Capacitors Through Hole,D5xL11mm |
| Mfr. Part # | ERE1H2R2M051100B | Package | Through Hole,D5xL11mm |
| Model Number | ERE1H2R2M051100B |
This specification covers "ALL series" miniature single-ended aluminum electrolytic capacitors designed for reliable long-term operation within a specified ambient temperature range. These capacitors adhere to RoHS, REACH, and HF standards.
| Category | Series | Voltage (WV) | Capacitance (Cap) | Tolerance | Size (Dia. x Length) | Terminal | Colour Code | Other |
| E (Electrolytic Capacitor) | RE | 1 to 600 | 0.1 to 68000 | 5% to 20% | 3x5 to 18x40 | Bulk packing (O0), Taping (T1, T2, T3, T4), Lead Cut (RT), RF, RG, RJ, RR, LF, LJ, LR, LG, RS, RN, RV, LH, TE, TF, TG, LP, LT, LS, LV | Black (B), Yellow (Y), Ink Green (I), Light Green (L), Orange (O), White (W), Purple (P) | Special codes for customer requirements |
| P (Conductive Polymer) | ||||||||
| S (super-capacitor) |
| Item | Test Conditions | Performance Requirements |
| Surge Voltage | At 15~35, applying Surge Voltage 1000 cycles of 30s on and 330s off. | No visible damage, C/C 10 %, tg initial specified value, I initial specified value |
| Load Life | At rated temperature, applying rated voltage (DC value + peak ripple voltage nominal voltage) for specified times, then resumed 16 hours after. | C/C within 20 % of initial value, tg 200% initial specified value, I initial specified value |
| Shelf Life | 1000 hours at +105. After test: UR to be applied for 30min > 24h before measurement. | C/C within 20 % of initial value, tg 200% initial specified value, I 200% initial specified value |
| Solderability | Tank temperature: 2355; Impregnating depth: 90% of the total dipped portion of termination; Impregnating depth: 2s. | The lead wire is coated by tin and wet. At least 90% of Circumferential surface of the lead wire covered with new solder. |
| Resistance to soldering heat | Tank temperature: 2605; Impregnating depth: 6mm; Impregnating time: 10s. | No visible damage, C/C 10 %, tg initial specified value, I initial specified value |
| Stable Humidity | 21 days at 40, RH 90 to 95%, no voltage applied. | No visible damage; no leakage of electrolyte; marking legible, C/C 5 %, tg initial specified value, I initial specified value |
| Resistance to vibration | Frequency: From 10 to 55 Hz and return to 10 Hz, shall be transferred in 1 Min. Total Amplitude: 1.5 mm. Direction and duration of vibration: 3 orthogonal directions mutually each for 2 hours. Total 6 hours. | No visible damage; no leakage of electrolyte; marking legible, C/C 5 %, tg initial specified value, I initial specified value |
| Characteristic at High and low temperature | Step 1: Measured impedance. Step 2: After storage for 2 hours, measure at thermal stability. Step 4: After storage for 2 hours, measure Leakage Current at thermal stability. | Step 2 Impedance ratio (to Step 1) 5. Step 4 Leakage Current 10 times specified value. |
| Resisting Solvent | Solvent: Isopropylalcohol. Temperature: 20-25. Time: 305s. | Appearance: No remarkable abnormality. |
| Terminal Strength | Tensile strength: Applied static load to terminal in axial direction for 101 sec. Bending strength: Hang specified dead weight, bend body 90, return, bend 90 opposite, return. Complete in 5 sec. | When capacitance is measured, no contact, open or short circuit. No mechanical or terminal damage. |
| Reversed polarity D.C. test | D.C. rated voltage shall be applied to the capacitor. | |
| Pressure relief | The pressure relief device shall open in such a way as to avoid any danger of fire or explosion of Capacitor elements. Applies to capacitors with diameter 6.3mm. | No fire, no explosion or separation of aluminum case and sealing material. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!