Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -40℃~+105℃ |
| Capacitance | 470uF |
| Height - Seated (Max) | 12mm |
| Pin Spacing | 3.5mm |
| Voltage Rating | 16V |
| Diameter | 8mm |
| Tolerance | ±20% |
| Description | 470uF 16V Aluminum Electrolytic Capacitors Through Hole,D8xL12mm |
| Mfr. Part # | 16V470uF CD110 |
| Package | Through Hole,D8xL12mm |
| Model Number | 16V470uF CD110 |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
Aluminum Electrolytic Capacitor Guangdong TOPAZ Elec Tech ECLJ0612270M080P00 for
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Product Specification
| Operating Temperature | -40℃~+105℃ | Capacitance | 470uF |
| Height - Seated (Max) | 12mm | Pin Spacing | 3.5mm |
| Voltage Rating | 16V | Diameter | 8mm |
| Tolerance | ±20% | Description | 470uF 16V Aluminum Electrolytic Capacitors Through Hole,D8xL12mm |
| Mfr. Part # | 16V470uF CD110 | Package | Through Hole,D8xL12mm |
| Model Number | 16V470uF CD110 |
The CD110 series plug-in aluminum electrolytic capacitors are designed for general-purpose applications. These capacitors offer reliable performance with a wide operating temperature range of -40 to +105. They are suitable for various industrial and electronic circuits where stable capacitance and low leakage current are required. The capacitors feature a black sleeve with white printing for clear identification and are available in standard sizes.
| HRK P/N () | Rated Capacitance (uF) | Rated Voltage (V) | Capacitance Tolerance (%) | Dissipation Factor (tan, max %) | Leakage Current (uA, max) | Surge Voltage (V) | Equivalent Impedance (, 20, 100KHz) | Rated Ripple Current (mA rms, 105, 100KHz) | Durability (Hrs, at 105) | Diameter (mm) | Height (mm) | Lead Diameter (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CD110 | 33 | 400 | -20~+20 | 24 | 436 | 450 | 190 | 2,000 | 13 | 17 | 0.60 |
| Parameter | Specification |
|---|---|
| Operating Temperature Range | -40 to +105 |
| Standard Reference | SJ/T11000-2023 |
| Case Material | Aluminum |
| Separator Paper Material | Wood Pulp |
| Electrolyte Material | Ethylene Glycol, Ammonium Adipate |
| Rubber Seal Material | EPDM Rubber |
| Lead Wire Material | Tinned Copper Clad Steel Wire |
| Sleeve Material | Polyvinyl Chloride (PVC) |
| Storage Temperature Recommendation | 35, RH 75% RH, no direct sunlight |
| Shelf Life | 12 months |
| Product Size (DxL mm) | Bags per Inner Box | Pieces per Inner Box | Inner Boxes per Outer Box | Pieces per Outer Box | Inner Box Dimensions (mm) | Outer Box Dimensions (mm) |
|---|---|---|---|---|---|---|
| 13*17 | 200 | 16 | 2 | 6400 | 290*225*295 | 470*315*320 |
| Test Item | Test Conditions/Methods | Judgment Standard |
|---|---|---|
| Capacitance (CAP) | Test Circuit: Series Equivalent Circuit, Test Frequency: 120Hz, Test Voltage: Rated Voltage | Within the error range of rated capacitance (see Table-1) |
| Dissipation Factor (DF) | Less than or equal to the dissipation factor tangent value in Table-1 | |
| Leakage Current (LC) | Apply rated DC voltage across the capacitor with a 100010 series resistor for 2 minutes, then measure leakage current. | Less than or equal to the leakage current value in Table-1 |
| Surge Voltage | At 15~35, apply surge voltage through a protection resistor (10050)/CR (K). Charge for 305s, discharge for 5.50.5 min per cycle, total 1000 cycles. | Capacitance change rate: within 15% of initial value. Dissipation factor: not greater than specification. Leakage current: not greater than specification. Appearance: no visible abnormalities. |
| Temperature Characteristics | Stages: 255, -253, -403, 255, +1053 (each reaching thermal stability) | Impedance ratio (Stage 2,3 vs Stage 1): not exceeding upper table values. Capacitance change rate (vs Stage 1): not exceeding 25%. Dissipation factor: not exceeding 5x specification. Leakage current: not exceeding specification. |
| Lead Tensile Strength | Apply tensile force to capacitor leads for 101 seconds. | See table for lead diameter and tensile strength (N {kgf}). No obvious appearance change, no lead breakage or loosening. |
| Lead Bending Strength | Fix capacitor vertically, apply specified bending force to leads. Rotate 90 degrees in one direction and return, then 90 degrees in the opposite direction and return, as one cycle. | No obvious appearance change, no lead breakage or loosening. |
| Vibration Test | 2 hours in each direction on vibration test stand, total 6 hours. Frequency range: 10~55Hz, Amplitude: 1.5mm, Sweep rate: approx. 1 min per sweep. | Capacitance test: stable. Capacitance change: within 5% of initial value. Appearance: no defects. |
| Solderability | Dip capacitor terminals in rosin solution (25% by weight) for 5~10s, then immerse in solder at 2455 until approx. 1.5~2.0mm from the capacitor body. | Approximately 90% of the immersed lead surface area should be covered with new tin. |
| Soldering Heat Resistance | Immerse terminals below 1.5~2.0mm from the body into solder at 2605 or 35010 for 101s or 3~4s respectively. Remove and place in normal temperature and humidity for 1~2 hours before measurement. | Capacitance change rate: within 10% of initial value. Dissipation factor: not greater than specification. Leakage current: not greater than specification. Appearance: no significant abnormalities. |
| Steady State Damp Heat | Place in an environment of 405 and 90~95% RH for 2408 hours. Then place in normal temperature and humidity for 1~2 hours before measurement. | Capacitance change rate: within 20% of initial value. Dissipation factor: not exceeding 1.2x specification. Leakage current: not exceeding specification. Appearance: no significant abnormalities. |
| Rapid Temperature Change | Place capacitor in a thermal shock chamber. Cycle: +25(3min) -40(30min) +25(3min) +105(30min) +25(3min). Perform 5 cycles. Place in normal temperature and humidity for 1~2 hours before measurement. | Capacitance change rate: within 10% of initial value. Dissipation factor: not greater than specification. Leakage current: not greater than specification. Appearance: no significant abnormalities. |
| Durability | Apply rated voltage and ripple current at the upper temperature limit for the rated life. Place in standard environment for 1~2 hours. | Capacitance change rate: within 20% of initial value. Dissipation factor: not exceeding 2x specification. Leakage current: not exceeding specification. Appearance: no significant abnormalities. |
| High Temperature Storage | Store at 1052 without voltage for 1000+48/-0 hours. Recover for 16 hours before measurement. | Capacitance change rate: within 20% of initial value. Dissipation factor: not exceeding 2x specification. Leakage current: not exceeding specification. Appearance: no significant abnormalities. |
| Explosion Proof | a) AC Power Test: Apply 0.7x rated voltage (50 or 60Hz) or 250V AC (whichever is lower) across the capacitor. b) DC Power Test: Apply 1A current for diameter 22.4mm, 10A current for diameter > 22.4mm, with reverse DC voltage. | Explosion vent opens, no flame. If vent does not open after 30 minutes, performance is considered satisfactory. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!