plug in aluminum electrolytic capacitor HRK 50V2.2uF CD110 with wide temperature

Product Specification

Product Overview

The CD110 series is a standard plug-in type aluminum electrolytic capacitor designed for reliable long-term operation. It features a black sleeve with white lettering and is rated for a wide operating temperature range of -40 to +105. This capacitor is suitable for applications requiring stable performance and a long lifespan, with specific attention paid to ripple current management for optimal longevity. It adheres to relevant industry standards and is manufactured by Shenzhen Hongruikai Electronic Technology Co., Ltd.

Product Attributes

• Brand: HRK ()
• Series: CD110
• Type: Plug-in Aluminum Electrolytic Capacitor
• Sleeve Color: Black
• Marking Color: White
• Origin: Shenzhen, China
• Environmental Compliance: RoHS, REACH SVHC, 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), Sony SS-00259 Rev. 18

Technical Specifications

Detailed Specifications

Usage Precautions

• Aluminum electrolytic capacitors are polarized; ensure correct polarity to prevent short circuits or damage. Use non-polarized capacitors if polarity is uncertain or reversible.
• Do not apply reverse voltage or DC voltage exceeding the rated voltage. Exceeding rated voltage significantly increases leakage current and can cause damage. Operate at rated voltage for optimal lifespan. Surge voltage is the maximum voltage the capacitor can withstand for a short period.
• Ripple current should be kept below the rated value. Exceeding the rated ripple current causes internal heating, capacity reduction, and shortened lifespan. The sum of the peak ripple voltage and DC voltage must be less than the rated working voltage.
• Operate within the rated temperature range. Exceeding the upper limit drastically reduces lifespan or may activate the safety vent. Operation at room temperature ensures a longer lifespan. For every 10C decrease in ambient temperature, the lifespan doubles.
• Prolonged storage can increase leakage current, especially at higher temperatures. Store in a suitable environment. Leakage current will decrease after applying voltage. If high leakage current affects the circuit, pre-charge the capacitor before use.
• Not suitable for circuits with frequent charge/discharge cycles, as capacity may decrease due to anode oxidation or damage from generated heat.
• Improper installation or stress on leads can damage the internal structure, leading to high leakage current or leakage issues. Ensure good soldering, appropriate PCB hole spacing, do not bend leads excessively, and avoid bending or twisting the capacitor body during soldering.
• During tin dipping or soldering, the sleeve may crack or shrink if exposed to excessive heat or time.
• Do not clean with halogenated organic solvents. If cleaning is necessary, use a cleaner that guarantees capacitor quality. After cleaning, do not store in the cleaning solution or sealed containers. Dry with hot air (not exceeding the capacitor's upper temperature limit) for at least 10 minutes.
• Do not use fixing agents or coating agents containing halogenated organic compounds. Avoid completely sealing the capacitor's sealing area with these agents.
• Recommended storage conditions: <35, <75% RH, away from direct sunlight. Shelf life is 12 months from the date of manufacture. If stored beyond 12 months, check electrical characteristics and solderability.
• Dispose of capacitors according to local industrial waste regulations.
• Refer to EIAJ RCR-2367B for further details.

Packaging Information