Beijing Silk Road Enterprise Management Services Co., Ltd.
| Lifetime | 1000hrs@105℃ |
| Operating Temperature | -40℃~+105℃ |
| Capacitance | 220uF |
| Height - Seated (Max) | 7mm |
| Voltage Rating | 16V |
| Pin Spacing | 2.5mm |
| Diameter | 6mm |
| Equivalent Series Resistance(ESR) | - |
| Ripple Current | 99mA |
| Tolerance | ±20% |
| Description | 220uF 16V 99mA ±20% Through Hole,D6xL7mm Aluminum Electrolytic Capacitors RoHS |
| Mfr. Part # | RO081C1C221E7ROMO0 |
| Package | Through Hole,D6xL7mm |
| Model Number | RO081C1C221E7ROMO0 |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
Aluminum Electrolytic Capacitor Guangdong TOPAZ Elec Tech ECLJ0612270M080P00 for
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Product Specification
| Lifetime | 1000hrs@105℃ | Operating Temperature | -40℃~+105℃ |
| Capacitance | 220uF | Height - Seated (Max) | 7mm |
| Voltage Rating | 16V | Pin Spacing | 2.5mm |
| Diameter | 6mm | Equivalent Series Resistance(ESR) | - |
| Ripple Current | 99mA | Tolerance | ±20% |
| Description | 220uF 16V 99mA ±20% Through Hole,D6xL7mm Aluminum Electrolytic Capacitors RoHS | Mfr. Part # | RO081C1C221E7ROMO0 |
| Package | Through Hole,D6xL7mm | Model Number | RO081C1C221E7ROMO0 |
The CD81C series aluminum electrolytic capacitors from Jiang Xi Lian Sheng Electronic CO.,LTD. are designed for electronic equipment applications. These polar aluminum electrolytic capacitors (foil type) meet IEC60384 standards and are RoHS compliant. They offer a stable performance across a wide temperature range and are suitable for various industrial uses.
| Part Description | Customer (P/N) | Series | Rated Voltage (V) | Capacity (uF) | Capacitance Tolerance (%) | Case Size (mm) | Dissipation Factor Max (%) | Leakage Current (uA) | Surge Voltage (SV) | Category Temperature Range (C) | Ripple Current (mA) | Load Life (105C) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CD81C | R0081C1C221A7R0M00 | CD81C | 16 | 220 | -20+20 | 6*7 | 0.16 (at 16V) | 35.2 (2min) | 20 | -40+105 | 99 (105C, 100KHz) | 1000H |
| Part Description | D | d | F | D | L |
|---|---|---|---|---|---|
| CD81C | 6 | 0.5 | 2.5 | D+0.5max | L+1.5max |
Capacitors shall be marked with:
| Item | Characteristics |
|---|---|
| Operating temperature range | -40~+105C |
| Rated working voltage range | 6.3V~50V |
| Capacitance tolerance | -20%+20% (at 20C, 120Hz) |
| Dissipation Factor (tg) Max | 0.16 (at 16V, 20C, 120Hz) |
| Leakage Current Max (2min) | 0.01CRUR or 3A (whichever is greater, at 20C) |
| Load life (105C) | After 1000 hours at 105C with rated ripple current and voltage, parameters should be within specified limits. |
| Shelf life (105C) | After 500 hours at 105C, electrical characteristics should be within specified limits. |
| Item | Test Method | Specification |
|---|---|---|
| Capacitance | Frequency: 120Hz12Hz, Voltage: 0.5Vrms+0.5VDC2.0VDC | See specification of this series |
| Dissipation Factor, Leakage Current | See specification of this series | See specification of this series |
| Leakage Current | DC leakage current measured after 1-2 minutes application of DC rated working voltage through a 1000 resistor. | See specification of this series |
| Temperature Characteristics | Impedance and capacitance measured at various temperatures (-40C, -25C, 20C, 105C). | Capacitance change: Within 20% of initial value. Impedance ratio: Less than specified value. |
| Surge Test | Rated surge voltage applied for 305 sec, repeated for 1000 cycles. | Capacitance change: Within 20% of initial value. Dissipation factor: Less than 200% of initial specified value. Leakage current: Within specified value. |
| Item | Test Method | Specification |
|---|---|---|
| Lead Strength (Tensile & Bending) | Applies specified load for 10 seconds without damage. Bending test involves rotating the capacitor. | No electrical or mechanical damage. No intermittent contacts, open or short circuits. |
| Vibration Resistance | Frequency 10-55 Hz, amplitude 1.5mm, vibrated in three mutually perpendicular directions for 2 hours each. | Capacitance stable, appearance normal. Capacitance change: Within 5% of initial value. |
| Solder Ability | Leads dipped in solder bath at 260C 5C for 20.5 seconds. | Solder alloy covers 95% or more of dipped lead surface. |
| Item | Test Method | Specification |
|---|---|---|
| Soldering Heat Resistance | Leads immersed in solder bath at 260C 5C for 101 seconds. | No visible damage or electrolyte leakage. Capacitance change: Within 5% of initial value. Tan & Leakage current: Less than specified value. |
| Damp Heat (Steady State) | 40C 2C and 90% to 95% RH for 2408 hours. | Capacitance change: Within 20% of initial value. Tan & Leakage current: Less than specified value. |
| Load Life | 1000 hours continuous application of DC rated working voltage at 105C. | Judgment standard according to this series requirement. |
| Shelf Life | 500 hours at 105C without voltage. | Electrical characteristics meet specified limits after treatment. |
| Storage at Low Temperature | -25C 3C for 964 hours, then 16 hours in standard atmosphere. | Capacitance change: Within 20% of initial value. Tan & Leakage current: Less than specified value. Appearance: No abnormal. |
| Pressure Relief (Explosion Proof) | AC and DC tests applied. | Pressure relief device shall open to prevent explosion. |
| No. | Part Name | Material | Main Supplier |
|---|---|---|---|
| 1 | Anode Foil (+) | Aluminum | Low Voltage: HongYuan, Haixin; High Voltage: Haixing |
| 2 | Cathode Foil (-) | Aluminum | Feile |
| 3 | Separator Paper | Wood pulp paper | Kaien |
| 4 | Aluminum Case | 99.5% Al | Anqili/Aoxin |
| 5 | Sleeve | PET (Poly vinyl chloride) | Yunling |
| 6 | Guide Pin | Aluminum+CP wire | Xingsheng |
| 7 | Colloidal Particles | Synthetic rubber IIR | Lianhuaxin |
| 8 | Electrolyte | Glycol+organic acid salt | Haotai |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!