Beijing Silk Road Enterprise Management Services Co., Ltd.
| Current Rating | 6A |
| Number of Circuits | 1 |
| DC Resistance(DCR) | 15mΩ |
| Impedance @ Frequency | 0Ω@100MHz |
| Description | 0Ω@100MHz 1 Line Ferrite Bead 1206 6A 15mΩ |
| Mfr. Part # | ZECB321609A000-6A000 |
| Package | 1206 |
| Model Number | ZECB321609A000-6A000 |
View Detail Information
Explore similar products
Multilayer Ferrite Chip Beads for EMI Suppression Chilisin BBUP00321611121Y00
Compact multilayer chip ferrite beads FH CBM201209U181T for EMI RFI noise
High Current Multilayer Chip Ferrite Beads FH CBM201209U220T Suitable for SMT
Multilayer chip ferrite beads FH CBM160808U220T designed for EMI RFI suppression
Product Specification
| Current Rating | 6A | Number of Circuits | 1 |
| DC Resistance(DCR) | 15mΩ | Impedance @ Frequency | 0Ω@100MHz |
| Description | 0Ω@100MHz 1 Line Ferrite Bead 1206 6A 15mΩ | Mfr. Part # | ZECB321609A000-6A000 |
| Package | 1206 | Model Number | ZECB321609A000-6A000 |
This specification applies to the BCMS-3216 series Ferrite Chip EMI suppressors, designed for noise suppression applications.
| Part Number | Impedance () at 100 MHz, 500mV | DC Resistance () Max | Rated Current (mA) Max | Operating Temp. Range | Storage Temp. Range | Dimensions (L x W x T) mm |
| BCMS321609A000 | 0 25% | 0.015 | 6000 | -55 ~ +125 | -10 ~ +40 | 3.20.2 x 1.60.2 x 0.90.2 |
| BCMS321611A000 | N/A | N/A | N/A | N/A | N/A | N/A |
| Type | Conditions |
| Reflow Soldering | Pre-heating: Temperature difference between solder and ferrite surface 150 max. Cooling into solvent 100 max. Temperature Profile: Slope of temp. rise (A, C): 1 to 5 /sec; Heat time (B): 50 to 150 sec; Heat temperature: 120 to 180 ; Time over 230 (D): 90~120 sec; Peak temperature (E): 255~260 ; Peak hold time: 10 max. sec. Number of mounting: 3 times. |
| Reworking with Soldering Iron | Preheating: 150, 1 minute. Tip temperature: 280 max. Soldering time: 3 seconds max. Soldering iron output: 30w max. End of soldering iron: 3mm max. Reworking limited to one time. |
| Item | Specification | Test Conditions |
| Terminal Strength | Without deformation cases, impedance shall be satisfied 30% for 10 sec | Solder chip on PCB and applied 10N (1.02Kgf) |
| Substrate Bending | Without deformation cases, impedance shall be satisfied 30% | After soldering a chip to a test substrate, bend the substrate by 3mm hold for 10s and then return. |
| Resistance to Solder Heat | No visible damage, Electrical characteristics and mechanical characteristics shall be satisfied. | Solder Temp.: 2653; Immersion time: 61 sec; Preheating: 100 to 150, 1 minute. Measurement after 242 hrs at room temp. |
| Solderability | 95% min. coverage of all metabolised area | Solder temp.: 2405; Immersion time: 31 sec. Solder: Sn-3Ag-0.5Cu. |
| Test | Performance Specification | Test Condition |
| High Temperature Resistance | Appearance: no mechanical damage. Impedance: 30% of initial value. DC resistance: satisfied. | Temperature: 1252. Applied current: Rated current. Testing time: 100812hrs. Measurement after 24 hours minimum at room ambient temperature. |
| Humidity Resistance | Appearance: no mechanical damage. Impedance: 30% of initial value. DC resistance: satisfied. | Humidity: 90 to 95% RH. Temperature: 602. Applied current: Rated current. Testing time: 100812hours. Measurement after 24 hours minimum at room ambient temperature. |
| Temperature Cycle | Appearance: no mechanical damage. Impedance: 30% of initial value. DC resistance: satisfied. | -55,+125 stabilized for 30 minutes each. 100 cycles. Measurement after 24 hours minimum at room ambient temperature. Steps: -55 (303 min), Standard atmospheric (5s), +125 (303 min), Standard atmospheric (5s). |
| Low Temperature Storage Life Test | Appearance: no mechanical damage. Impedance: 30% of initial value. DC resistance: satisfied. | Temperature: -552. Testing time: 100812hours. Measurement after 24 hours minimum at room ambient temperature. |
| Thermal Shock | Appearance: no mechanical damage. Impedance: 30% of initial value. | -55,+125 stabilized for 30 minutes each. 100 cycles. Measurement after 24 hours minimum at room ambient temperature. |
| Vibration Test | Appearance: no mechanical damage. Impedance: 30% of initial value. | Waveform: Sine wave. Frequency: 10~55~10 Hz. Sweep time: 1min. Amplitude: 1.5mm(peak-peak). Direction: X,Y,Z (3 axes). Duration: 2 hrs./axis, total 6 hrs. |
| Dimension | A0 | B0 | W | F | E | P1 | P2 | P0 | D0 | D1 | K | T | T2 |
| Value (mm) | 1.88 0.1 | 3.5 0.1 | 8.0 0.2 | 3.5 0.05 | 1.75 0.1 | 4.0 0.1 | 2.00 0.05 | 4.0 0.1 | 1.55 0.05 | 1.0 0.1 | 1.27 0.1 | 0.23 0.1 | 1.27 0.1 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!