Beijing Silk Road Enterprise Management Services Co., Ltd.
| Current Rating | 4A |
| Number of Circuits | 1 |
| DC Resistance(DCR) | 25mΩ |
| Tolerance | ±25% |
| Impedance @ Frequency | 40Ω@100MHz |
| Description | 40Ω@100MHz 1 Line Ferrite Bead 1206 4A 25mΩ |
| Mfr. Part # | ZECB321609A400-4A000 |
| Package | 1206 |
| Model Number | ZECB321609A400-4A000 |
View Detail Information
Explore similar products
Multilayer Ferrite Chip Beads for EMI Suppression Chilisin BBUP00321611121Y00
Compact multilayer chip ferrite beads FH CBM201209U181T for EMI RFI noise
High Current Multilayer Chip Ferrite Beads FH CBM201209U220T Suitable for SMT
Multilayer chip ferrite beads FH CBM160808U220T designed for EMI RFI suppression
Product Specification
| Current Rating | 4A | Number of Circuits | 1 |
| DC Resistance(DCR) | 25mΩ | Tolerance | ±25% |
| Impedance @ Frequency | 40Ω@100MHz | Description | 40Ω@100MHz 1 Line Ferrite Bead 1206 4A 25mΩ |
| Mfr. Part # | ZECB321609A400-4A000 | Package | 1206 |
| Model Number | ZECB321609A400-4A000 |
This specification applies to the BCMS3216 series Ferrite Chip EMI suppressors. These components are designed to suppress electromagnetic interference (EMI) in electronic circuits.
| Part Number | Impedance () at 100 MHz, 500mV | DC Resistance () Max | Rated Current (mA) Max | Operating Temp. Range | Storage Temp. Range | Dimensions (L x W x T) (mm) |
| BCMS321609A400 | 4025% | 0.006 | 6000 | -55 ~ +125 | -10 ~ +40 | 3.20.2 x 1.60.2 x 0.90.2 |
Pre-heating: Temperature difference between solder and ferrite surface limited to 150 max. Cooling into solvent after soldering limited to 100 max.
Temperature Profile:
Reworking with soldering iron: Preheating 150, 1 minute; Tip temperature 280 max; Soldering time 3 seconds max; Soldering iron output 30w max; End of soldering iron 3mm max. Reworking limited to one time.
| Item | Specification | Test Conditions |
| Terminal Strength | Impedance shall be satisfied 30% for 10 sec. DC resistance shall be satisfied. | Solder chip on PCB and applied 10N (1.02Kgf) |
| Substrate Bending | Impedance shall be satisfied 30%. DC resistance shall be satisfied. | After soldering a chip to a test substrate, bend the substrate by 3mm hold for 10s and then return. Soldering in accordance with recommended PC board pattern and reflow soldering. |
| Resistance to Solder Heat | No visible damage. Electrical characteristics and mechanical characteristics shall be satisfied. | Solder Temp.: 2653; Immersion time: 61 sec; Preheating: 100 to 150, 1 minute. Measurement after keeping at room temp for 242 hrs. |
| Solderability | 95% min. coverage of all metallised area. | Solder temp.: 2405; Immersion time: 31 sec. Consult standard J-STD-002. |
| Test Item | Performance Specification | Test Condition |
| High Temperature Resistance | Appearance: no mechanical damage. Impedance: 30% of initial value. DC resistance: satisfied. | Temperature: 1252; Applied current: Rated current; Testing time: 100812hrs; Measurement: After 24 hours at room ambient temp. |
| Humidity Resistance | Appearance: no mechanical damage. Impedance: 30% of initial value. DC resistance: satisfied. | Humidity: 90 to 95% RH; Temperature: 602; Applied current: Rated current; Testing time: 100812hours; Measurement: After 24 hours at room ambient temp. |
| Temperature Cycle | Appearance: no mechanical damage. Impedance: 30% of initial value. DC resistance: satisfied. | -55,+125 stabilized for 30 min each; 100 cycles. Measurement: After 24 hours at room ambient temp. Steps: -55 (303 min), Standard conditions (5s), +125 (303 min), Standard conditions (5s). |
| Low Temperature Storage Life Test | Appearance: no mechanical damage. Impedance: 30% of initial value. DC resistance: satisfied. | Temperature: -552; Testing time: 100812hours; Measurement: After 24 hours at room ambient temp. |
| Thermal Shock | Appearance: no mechanical damage. Impedance: 30% of initial value. | -55,+125 stabilized for 30 min each; 100 cycles. Measurement: After 24 hours at room ambient temp. |
| Vibration Test | Appearance: no mechanical damage. Impedance: 30% of initial value. | Waveform: Sine wave; Frequency: 10~55~10 Hz; Sweep time: 1min; Amplitude: 1.5mm(peak-peak); Direction: X,Y,Z (3 axes); Duration: 2 hrs./axis, total 6 hrs. |
| Dimension | A0 | B0 | W | F | E | P1 | P2 | P0 | D0 | D1 | K | T | T2 |
| Value (mm) | 1.880.1 | 3.50.1 | 8.00.2 | 3.50.05 | 1.750.1 | 4.00.1 | 2.000.05 | 4.00.1 | 1.550.05 | 1.00.1 | 1.270.1 | 0.230.1 | 1.270.1 |
Leader and Trailer Tape: Specified.
Reels Packing Qty: 4,000 PCS/REEL
Peeling Strength of Cover Tape: 10g~100g (Test condition: peel angle 165~180, peel speed 300mm/min)
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!