Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -40℃~+85℃ |
| Frequency Stability | ±25ppm |
| Output Type | LVCMOS |
| Frequency | 33.333MHz |
| Description | LVCMOS Programmable Oscillator 33.333MHz SMD3225-4P |
| Mfr. Part # | 3NM33333C33YC |
| Package | SMD3225-4P |
| Model Number | 3NM33333C33YC |
View Detail Information
Explore similar products
CMOS SMD TCXO ECS ECS-327TXO-2012-33-TR compact ceramic package for IoT devices
Crystal oscillator muRata XNCLH19M200THJA1P0 19200000 megahertz frequency
Stable Frequency TCXO ECS ECS-TXO-2016-33-320-TR Miniature SMD CMOS with Low
quartz pll oscillator RENESAS XK33R156R312R625I with ultra low phase noise and
Product Specification
| Operating Temperature | -40℃~+85℃ | Frequency Stability | ±25ppm |
| Output Type | LVCMOS | Frequency | 33.333MHz |
| Description | LVCMOS Programmable Oscillator 33.333MHz SMD3225-4P | Mfr. Part # | 3NM33333C33YC |
| Package | SMD3225-4P | Model Number | 3NM33333C33YC |
The Si MEMS Oscillator Series 3NM is a surface mountable, epoxy-molded oscillator designed for reliable performance in various electronic applications. Featuring a 3.2x2.5mm package, this MEMS oscillator offers a nominal frequency of 33.333MHz and operates within a wide temperature range of -40 to 85. It supports LVCMOS output and is compliant with RoHS, REACH, and HF environmental standards.
Standard Atmospheric Conditions for Measurement:
Ambient temperature: 255
Relative humidity: 40%~70%
Limits for Doubtful Results:
Ambient temperature: 253
Relative humidity: 40%~70%
| SYM | Parameter | MIN | TYPE | MAX | UNITS | Notes |
|---|---|---|---|---|---|---|
| 1 | Nominal Frequency | 33.333000 | MHZ | |||
| 2 | Frequency Stability AT 25 | 10 | PPM | |||
| Over Operating Temperature range | 15 | PPM | ||||
| 3 | Operating Temperature (Topr) | -40 | 25 | 85 | ||
| 4 | Storage Temperature (Tstg) | -55 | 125 | |||
| 5 | Supply Voltage (VDD) | 3.3 10% | V | 1.62~3.63V | ||
| 6 | Input Current (Icc) | 10 | mA | |||
| 7 | Enable Control | Yes | Pad1 | |||
| 8 | Output Load (CL) | 15 | pF | CMOS | ||
| 9 | Output Voltage High (VoH) | 90% | Vdd V | |||
| 10 | Output Voltage Low (VoL) | 10% | Vdd V | |||
| 11 | Rise Time (Tr) | 5 | ns | 10%90%VDD Level | ||
| 12 | Fall Time (Tf) | 5 | ns | 90%10%VDD Level | ||
| 13 | Symmetry (Duty ratio) (TH/T) | 45 | 55 | % | ||
| 14 | Start-up Time (Tosc) | 10 | ms | |||
| 15 | Enable Voltage High (Vhi) | 70% | Vdd V | |||
| 16 | Disable Voltage Low (Vlo) | 30% | Vdd V | |||
| 17 | Aging | 3 | ppm/yr. | 1st. Year at 25 | ||
| 18 | Output Disable Delay Time (T off) | 150 | us | |||
| 19 | Output Enable Delay Time (T on) | 150 | us | |||
| 20 | Phase Jitter (12KHZ~20MHZ) | 0.5 | 1.0 | ps |
(Units :mm)
Control input (output enable/disable):
Logic 1 or open on pad 1: Oscillator output
Logic 0 on pad 1: Disable output to high impedance
Waveform measurement system should have a min. bandwidth of 5 times the frequency being tested.
Note that when the device is in standby, the oscillator stops. When standby is released, the oscillator starts and stable oscillator output occurs after a short delay.
Total time: 200 sec. Max / Solder melting point: 220
| No. | Test Item | Test Methods | REF. DOC |
|---|---|---|---|
| 1 | Drop Test | 75 cm height, 3 times on concrete floor. | JIS C6701 |
| 2 | Mechanical Shock | Device are shocked to half sine wave (1000 G) three mutually perpendicular axes each 3 times. 0.5m sec. duration time. | MIL-STD-202F |
| 3 | Vibration | Frequency range 10 ~ 2000 Hz, Amplitude 1.52 mm/20G, Sweep time 20 minutes, Perpendicular axes each test time 4 Hrs (Total test time 12 Hrs). | MIL-STD-883E |
| 4 | Gross Leak | Standard Sample For Automatic Gross Leak Detector, Test Pressure: 2kg / cm2. | MIL-STD-883E |
| 5 | Fine Leak | Helium Bomging 4.5 kgf / cm 2 for 2 Hrs. | |
| 6 | Solderability | Temperature 245 5, Immersing depth 0.5 mm minimum, Immersion time 5 1 seconds, Flux Rosin resin methyl alcohol solvent (1 : 4). | MIL-STD-883E |
| No. | Test Item | Test Methods | REF. DOC |
|---|---|---|---|
| 1 | Resistance To Soldering Heat | Pre-heat temperature 125 , Pre-heat time 60 ~ 120 sec., Test temperature 260 5 , Test time 10 1 sec. | MIL-STD-202F |
| 2 | High Temp. Storage | + 125 3 for 1000 12 Hrs. | MIL-STD-883E |
| 3 | Low Temp. Storage | - 40 3 for 1000 12 Hrs. | MIL-STD-883E |
| 4 | Thermal Shock | Total 100 cycles of the following temperature cycle. | MIL-STD-883E |
| 5 | Pressure Cooker Storage | 121 3 , RH100% , 2 bar , 240 Hrs. | JIS C6701 |
| 6 | High TempHumidity | 85 3, RH 85% , 1000 Hrs. | JIS C5023 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!