Beijing Silk Road Enterprise Management Services Co., Ltd.
| Inductance @ Frequency | 10mH@1kHz |
| Insulation Resistance(IR) | 100MΩ |
| Operating Temperature | -25℃~+85℃ |
| DC Resistance(DCR) | 800mΩ |
| Voltage Rating - DC | - |
| Number of Lines | 2 |
| Voltage Withstand | 1kV |
| Description | 10mH@1kHz 2Line Common Mode Choke Through Hole 500mA DCR 800mΩ |
| Mfr. Part # | UU9.8-10mH |
| Package | DIP-4P,17x12mm |
| Model Number | UU9.8-10mH |
View Detail Information
Explore similar products
Wire Wound Common Mode Choke Walsin WTCF2012Z0M221PB Ideal for USB Lines and
Wire Wound Chip Common Mode Coil CENKER CMC2012U-300-2P-T for Noise Suppression
Noise Suppression Coilank AACM2012T751W2 Common Mode Filter Compliant with AEC
Compact Common Mode Choke DDY WBA3225L201T-G-HF with Low DC Resistance and High
Product Specification
| Inductance @ Frequency | 10mH@1kHz | Insulation Resistance(IR) | 100MΩ |
| Operating Temperature | -25℃~+85℃ | DC Resistance(DCR) | 800mΩ |
| Voltage Rating - DC | - | Number of Lines | 2 |
| Voltage Withstand | 1kV | Description | 10mH@1kHz 2Line Common Mode Choke Through Hole 500mA DCR 800mΩ |
| Mfr. Part # | UU9.8-10mH | Package | DIP-4P,17x12mm |
| Model Number | UU9.8-10mH |
This UU9.8-10mH Line Filter is designed for filtering circuits. It offers a stable inductance of 10mH with a maximum deviation of 0.5mH and a direct current resistance of 1.2 MAX. The filter operates within a temperature range of -25C to +85C and is suitable for general electronic equipment applications. Key electrical characteristics include a rated current of 0.5A with a temperature rise not exceeding 45C, an insulation resistance of 100M MIN at DC500V, and withstand voltages of AC1.0KV (COIL-COIL) and AC0.8KV (COIL-CORE).
| Item | Pin No | Standard Spec. | Test Instrument | Notes |
|---|---|---|---|---|
| Inductance | 1--2 | 10mH MIN | CH3205 or EQUIVALENT (f=1kHz, 1V) | |
| 4--3 | ||||
| Inductance Difference | |L1-L2| 0.5mH MAX | |||
| Direct-current Resistance | 1--2 | 1.2 MAX | ||
| 4--3 | ||||
| Rated Current | 0.5A | TEMPERATURE RISE LESS THAN 45 | ||
| Insulation Resistance | COIL-COIL | 100M MIN | CH-9053A or EQUIVALENT at DC500V | |
| Withstand Voltage | COIL-COIL | AC1.0KV 3S | CH-9053A or EQUIVALENT (CC=5mA) | |
| COIL-CORE | AC0.8KV 3S | |||
| Dimensions (MAX) | 16.5 | Refers to UU9.8-10mH | ||
| Operating Temperature Range | -25~+85 | (Including self-heating temperature rise) |
| No. | Component | Material | Part No. | UL file No. |
|---|---|---|---|---|
| 1 | Bobbin | PHENOL T375J | T375J | SY-0901 or equivalent E59481(S) |
| 2 | Core | Ferrite | SNH10-UU9.8AMor equivalent | / |
| 3 | Wire | Enameled wire | 2UEW0.20mm155 or equivalent | E194410 |
| 4 | Varnish | EPOXY | T4260E57AF or equivalent | / |
| 5 | Solder | Tin, Copper | 99.3Sn:0.7Cu | / |
| No. | Item | Requirement | Test Method and Remarks |
|---|---|---|---|
| 1 | Solderability | Tinning area on pin 95% | Immersed in molten solder at 2455 for 3.0s0.5s |
| 2 | Tensile Test | No visible damage to appearance, no lead breakage | Test force: 1.5kg, Holding time: (105)s |
| 3 | Resistance to Soldering Heat | 1. No obvious damage to appearance 2. -10%L/L10% | Immerse the component in a solder bath at 2605 until the solder surface is level with the lowest point of the product body. Immersion time: 10s1s, Recovery time: 2h |
| 4 | Temperature Shock | 1. No obvious damage to appearance 2. -30%L/L30% | 30min at +105 30min at -25, 32 cycles. Transition time < 5min. After cycles, place at room temperature for 2h. |
| 5 | Constant Humidity Heat | 1. No obvious damage to appearance 2. -30%L/L30% | Test conditions: Temperature: 602, Humidity: 90%95% RH, Duration: 96h2 h. After test, place at room temperature for 2h2 h. |
| 6 | High Temperature Resistance | 1. No obvious damage to appearance 2. -30%L/L30% | Store at +1052 for 96 h2 h, then place at room temperature for 2h. |
| 8 | Low Temperature Resistance | 1. No obvious damage to appearance 2. -30%L/L30% | Store at -252 for 96 h2 h, then place at room temperature for 2h. |
| Packaging Method | Quantity | Total |
|---|---|---|
| 250 PCS/Box | 10 Boxes/Carton | 2500 PCS/Carton |
Applicable soldering process: Reflow soldering.
Storage Period: Within 6 months from the date of delivery to ensure solderability and packaging condition. If storage exceeds 6 months, confirm solderability before use.
Storage Conditions:
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!