Beijing Silk Road Enterprise Management Services Co., Ltd.
| Description | 1206 Common Mode Chokes RoHS |
| Mfr. Part # | CMC1206S-261T |
| Package | 1206 |
| Model Number | CMC1206S-261T |
View Detail Information
Explore similar products
Wire Wound Common Mode Choke Walsin WTCF2012Z0M221PB Ideal for USB Lines and
Wire Wound Chip Common Mode Coil CENKER CMC2012U-300-2P-T for Noise Suppression
Noise Suppression Coilank AACM2012T751W2 Common Mode Filter Compliant with AEC
Compact Common Mode Choke DDY WBA3225L201T-G-HF with Low DC Resistance and High
Product Specification
| Description | 1206 Common Mode Chokes RoHS | Mfr. Part # | CMC1206S-261T |
| Package | 1206 | Model Number | CMC1206S-261T |
The CMC Series Chip Common Mode Choke Coils are designed for effective noise suppression. These magnetically shielded inductors are constructed with a Ni-Zn ferrite core and cover plates, utilizing copper wire and silver/nickel/tin electrodes. Available in 0805 and 1206 series, they offer a range of impedance values suitable for various electronic applications. The products are RoHS compliant and designed for reflow soldering processes.
| Part Number | Dimensions (L x W x T) (mm) | Nominal Impedance () | Test Frequency (MHz) | Max. DC Resistance () | Max. Rated Voltage (Vdc) | Max. Rated Current (mA) | Min. Insulation Resistance (M) |
|---|---|---|---|---|---|---|---|
| CMC0805S-670T | 2.00.2 x 1.20.2 x 1.20.2 | 67 | 100 | 0.25 | 50 | 400 | 10 |
| CMC0805S-700T | 2.00.2 x 1.20.2 x 1.20.2 | 70 | 100 | 0.30 | 50 | 400 | 10 |
| CMC0805S-750T | 2.00.2 x 1.20.2 x 1.20.2 | 75 | 100 | 0.30 | 50 | 400 | 10 |
| CMC0805S-900T | 2.00.2 x 1.20.2 x 1.20.2 | 90 | 100 | 0.35 | 50 | 330 | 10 |
| CMC0805S-121T | 2.00.2 x 1.20.2 x 1.20.2 | 120 | 100 | 0.30 | 50 | 370 | 10 |
| CMC0805S-161T | 2.00.2 x 1.20.2 x 1.20.2 | 160 | 100 | 0.35 | 50 | 330 | 10 |
| CMC0805S-181T | 2.00.2 x 1.20.2 x 1.20.2 | 180 | 100 | 0.35 | 50 | 330 | 10 |
| CMC0805S-261T | 2.00.2 x 1.20.2 x 1.20.2 | 260 | 100 | 0.40 | 50 | 300 | 10 |
| CMC0805S-301T | 2.00.2 x 1.20.2 x 1.20.2 | 300 | 100 | 0.42 | 50 | 290 | 10 |
| CMC0805S-361T | 2.00.2 x 1.20.2 x 1.20.2 | 360 | 100 | 0.45 | 50 | 280 | 10 |
| CMC0805S-371T | 2.00.2 x 1.20.2 x 1.20.2 | 370 | 100 | 0.45 | 50 | 280 | 10 |
| CMC0805S-451T | 2.00.2 x 1.20.2 x 1.20.2 | 450 | 100 | 0.50 | 50 | 250 | 10 |
| CMC0805S-601T | 2.00.2 x 1.20.2 x 1.20.2 | 600 | 100 | 0.60 | 50 | 220 | 10 |
| CMC0805S-901T | 2.00.2 x 1.20.2 x 1.20.2 | 900 | 100 | 0.90 | 50 | 150 | 10 |
| CMC1206S-900T | 3.20.2 x 1.60.2 x 1.80.2 | 90 | 100 | 0.30 | 50 | 370 | 10 |
| CMC1206S-161T | 3.20.2 x 1.60.2 x 1.80.2 | 160 | 100 | 0.40 | 50 | 340 | 10 |
| CMC1206S-261T | 3.20.2 x 1.60.2 x 1.80.2 | 260 | 100 | 0.50 | 50 | 310 | 10 |
| CMC1206S-371T | 3.20.2 x 1.60.2 x 1.80.2 | 370 | 100 | 0.50 | 50 | 300 | 10 |
| CMC1206S-601T | 3.20.2 x 1.60.2 x 1.80.2 | 600 | 100 | 0.80 | 50 | 260 | 10 |
| CMC1206S-801T | 3.20.2 x 1.60.2 x 1.80.2 | 800 | 100 | 0.90 | 50 | 240 | 10 |
| CMC1206S-102T | 3.20.2 x 1.60.2 x 1.80.2 | 1000 | 100 | 1.00 | 50 | 230 | 10 |
| CMC1206S-142T | 3.20.2 x 1.60.2 x 1.80.2 | 1400 | 100 | 1.00 | 50 | 220 | 10 |
| CMC1206S-202T | 3.20.2 x 1.60.2 x 1.80.2 | 2000 | 100 | 1.20 | 50 | 200 | 10 |
| CMC1206S-222T | 3.20.2 x 1.60.2 x 1.80.2 | 2200 | 100 | 1.20 | 50 | 200 | 10 |
| Reliability Test Item | Requirements | Test Methods and Remarks |
|---|---|---|
| Operating Temperature Range | -40~+85 | |
| Solder ability | Electrode surface solder coverage: 80% | Dip pads in flux and dip in solder pot(96.5Sn/3.0Ag/0.5Cu)at 2455 for 51s. |
| Resistance to Soldering Heat | Impedance shall not change more than 20% | Dip pads in flux and dip in solder pot(96.5Sn/3.0Ag/0.5Cu)at 2605 for 101s. |
| Insulation Resistance | 10 M | The rated voltage is applied between the two windings for a minute. |
| Vibration | Impedance shall not change more than 20% | Amplitude 1.5mm, frequency 10~55Hz, for 2h in each of three (X, Y, Z) axes. |
| Adhesion of electrode | The end electrode did not fall off after the test. | Apply force as shown in diagram. CMC0805 Series: 5 N; CMC1206 Series: 10 N. Keep time: (101)s, Speed: 1.0 mm/s. |
| Low temperature resistance | Impedance shall not change more than 20% | Subjected to -402 for 1000 +24/-0 h. |
| High Temperature Resistance | Impedance shall not change more than 20% | Subjected to 852 for 1000 +24/-0 h. |
| Temperature Characteristic | Impedance shall not change more than 20% | Hold at 202, -402, 202, 852 for 4 hours each. Calculate deviation based on 202. |
| Thermal Shock | Impedance shall not change more than 20% | +85 for 60 min -40 for 60 min, 32 Cycles. Transition time: 2~3 min. |
| High temperature load | Impedance shall not change more than 20% | Apply rated current. Subjected to 852 for 1000 +24/-0 h. |
| Static Humidity | Impedance shall not change more than 20% | Subjected to 90%~95% RH at 602 for 1000 +24/-0 h. |
| Bending strength | No visible mechanical damage. | Install on test substrate; apply force vertically. Bend down 2 mm at a rate of (10.5) mm/s, hold for 5 sec. |
| Solvent Resistance | Impedance shall not change more than 20% | Soak in isopropyl alcohol solution at 235 for 50.5 min. |
| Packaging Type | Part No. | Per Reel | Per Box | Per Case |
|---|---|---|---|---|
| Reel | 0805 | 3000 | 9000 (3 Boxes) | 45000 (5 Cases) |
| Reel | 1206 | 2000 | 6000 (3 Boxes) | 30000 (5 Cases) |
Recommended Soldering Profile: Reflow soldering is recommended. Use rosin-based flux (halide content < 0.2wt%) and lead-free solder (96.5Sn/3.0Ag/0.5Cu). Temperature difference between solder and ferrite surface during pre-heating should not exceed 150. Cooling difference into solvent after soldering should not exceed 100. Soldering should be performed within the allowable range indicated by the profile curve.
Manual Soldering: Iron temperature: 350 (Max), Power: 30W (Max), Soldering Time: < 5S. Avoid touching coils or encapsulation layer.
Cleaning Conditions: Cleaning temperature: 60 (Max), Cleaning time: 5 minutes (Max), Ultrasonic power: 200W (Max).
Storage Requirements:
Usage Of ODS (Ozone Depleting Substances): CCl4, HCFC, etc. are not used in the production process.
Notes:
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!