Beijing Silk Road Enterprise Management Services Co., Ltd.
| Inductance @ Frequency | - |
| Insulation Resistance(IR) | 10MΩ |
| Operating Temperature | -40℃~+85℃ |
| DC Resistance(DCR) | 800mΩ |
| Voltage Rating - DC | 50V |
| Number of Lines | 2 |
| Voltage Withstand | - |
| Description | 2Line Common Mode Choke Surface Mount-4P 3.2x1.6mm 600Ω@100MHz 260mA DCR 800mΩ |
| Mfr. Part # | CMC1206S-601T |
| Package | SMD-4P,3.2x1.6mm |
| Model Number | CMC1206S-601T |
View Detail Information
Explore similar products
Wire Wound Common Mode Choke Walsin WTCF2012Z0M221PB Ideal for USB Lines and
Wire Wound Chip Common Mode Coil CENKER CMC2012U-300-2P-T for Noise Suppression
Noise Suppression Coilank AACM2012T751W2 Common Mode Filter Compliant with AEC
Compact Common Mode Choke DDY WBA3225L201T-G-HF with Low DC Resistance and High
Product Specification
| Inductance @ Frequency | - | Insulation Resistance(IR) | 10MΩ |
| Operating Temperature | -40℃~+85℃ | DC Resistance(DCR) | 800mΩ |
| Voltage Rating - DC | 50V | Number of Lines | 2 |
| Voltage Withstand | - | Description | 2Line Common Mode Choke Surface Mount-4P 3.2x1.6mm 600Ω@100MHz 260mA DCR 800mΩ |
| Mfr. Part # | CMC1206S-601T | Package | SMD-4P,3.2x1.6mm |
| Model Number | CMC1206S-601T |
The CMC Series Chip Common Mode Choke Coils are designed for effective noise suppression. These magnetically shielded inductors are constructed with a Ni-Zn ferrite core and cover plates, utilizing copper wire and silver/nickel/tin electrodes. Available in 0805 and 1206 series, they offer a range of impedance values suitable for various electronic applications requiring filtering and EMI reduction.
| Part Number | Dimensions (L x W x T) (mm) | Nominal Impedance () at 100 MHz | Tolerance (%) | DCR () max | Rated Voltage (Vdc) max | Rated Current (mA) max | Insulation Resistance (M) min |
|---|---|---|---|---|---|---|---|
| CMC0805S-670T | 2.0 0.2 x 1.2 0.2 x 1.2 0.2 | 67 | 25 | 0.25 | 50 | 400 | 10 |
| CMC0805S-700T | 2.0 0.2 x 1.2 0.2 x 1.2 0.2 | 70 | 25 | 0.30 | 50 | 400 | 10 |
| CMC0805S-750T | 2.0 0.2 x 1.2 0.2 x 1.2 0.2 | 75 | 25 | 0.30 | 50 | 400 | 10 |
| CMC0805S-900T | 2.0 0.2 x 1.2 0.2 x 1.2 0.2 | 90 | 25 | 0.35 | 50 | 330 | 10 |
| CMC0805S-121T | 2.0 0.2 x 1.2 0.2 x 1.2 0.2 | 120 | 25 | 0.30 | 50 | 370 | 10 |
| CMC0805S-161T | 2.0 0.2 x 1.2 0.2 x 1.2 0.2 | 160 | 25 | 0.35 | 50 | 330 | 10 |
| CMC0805S-181T | 2.0 0.2 x 1.2 0.2 x 1.2 0.2 | 180 | 25 | 0.35 | 50 | 330 | 10 |
| CMC0805S-261T | 2.0 0.2 x 1.2 0.2 x 1.2 0.2 | 260 | 25 | 0.40 | 50 | 300 | 10 |
| CMC0805S-301T | 2.0 0.2 x 1.2 0.2 x 1.2 0.2 | 300 | 25 | 0.42 | 50 | 290 | 10 |
| CMC0805S-361T | 2.0 0.2 x 1.2 0.2 x 1.2 0.2 | 360 | 25 | 0.45 | 50 | 280 | 10 |
| CMC0805S-371T | 2.0 0.2 x 1.2 0.2 x 1.2 0.2 | 370 | 25 | 0.45 | 50 | 280 | 10 |
| CMC0805S-451T | 2.0 0.2 x 1.2 0.2 x 1.2 0.2 | 450 | 25 | 0.50 | 50 | 250 | 10 |
| CMC0805S-601T | 2.0 0.2 x 1.2 0.2 x 1.2 0.2 | 600 | 25 | 0.60 | 50 | 220 | 10 |
| CMC0805S-901T | 2.0 0.2 x 1.2 0.2 x 1.2 0.2 | 900 | 25 | 0.90 | 50 | 150 | 10 |
| CMC1206S-900T | 3.2 0.2 x 1.6 0.2 x 1.8 0.2 | 90 | 25 | 0.30 | 50 | 370 | 10 |
| CMC1206S-161T | 3.2 0.2 x 1.6 0.2 x 1.8 0.2 | 160 | 25 | 0.40 | 50 | 340 | 10 |
| CMC1206S-261T | 3.2 0.2 x 1.6 0.2 x 1.8 0.2 | 260 | 25 | 0.50 | 50 | 310 | 10 |
| CMC1206S-371T | 3.2 0.2 x 1.6 0.2 x 1.8 0.2 | 370 | 25 | 0.50 | 50 | 300 | 10 |
| CMC1206S-601T | 3.2 0.2 x 1.6 0.2 x 1.8 0.2 | 600 | 25 | 0.80 | 50 | 260 | 10 |
| CMC1206S-801T | 3.2 0.2 x 1.6 0.2 x 1.8 0.2 | 800 | 25 | 0.90 | 50 | 240 | 10 |
| CMC1206S-102T | 3.2 0.2 x 1.6 0.2 x 1.8 0.2 | 1000 | 25 | 1.00 | 50 | 230 | 10 |
| CMC1206S-142T | 3.2 0.2 x 1.6 0.2 x 1.8 0.2 | 1400 | 25 | 1.00 | 50 | 220 | 10 |
| CMC1206S-202T | 3.2 0.2 x 1.6 0.2 x 1.8 0.2 | 2000 | 25 | 1.20 | 50 | 200 | 10 |
| CMC1206S-222T | 3.2 0.2 x 1.6 0.2 x 1.8 0.2 | 2200 | 25 | 1.20 | 50 | 200 | 10 |
| Item | Requirements | Test Methods and Remarks |
|---|---|---|
| Operating Temperature Range | -40~+85 | |
| Solder ability | Electrode surface solder coverage: 80% | Dip pads in flux and dip in solder pot (96.5Sn/3.0Ag/0.5Cu) at 2455 for 51s. |
| Resistance to Soldering | Impedance shall not change more than 20% | Dip pads in flux and dip in solder pot (96.5Sn/3.0Ag/0.5Cu) at 2605 for 101s. |
| Insulation Resistance | 10 M | Rated voltage applied between windings for one minute. |
| Vibration | Impedance shall not change more than 20% | Amplitude 1.5mm, frequency 10~55Hz, 2h in each of X, Y, Z axes. |
| Adhesion of electrode | End electrode did not fall off after test. | CMC0805 Series: 5 N; CMC1206 Series: 10 N. Keep time: (101)s, Speed: 1.0 mm/s. |
| Low temperature resistance | Impedance shall not change more than 20% | Stored at -402 for 1000 h. |
| High Temperature resistance | Impedance shall not change more than 20% | Stored at 852 for 1000 h. |
| Temperature Characteristic | Impedance variation rate shall not exceed 20% | Held at 202, -402, 202, 852 for 4h each. |
| Thermal Shock | Impedance shall not change more than 20% | +85 for 60 min -40 for 60 min, 32 cycles. Transition time: 2~3 min. |
| High temperature load | Impedance shall not change more than 20% | Rated current applied, stored at 852 for 1000 h. |
| Static Humidity | Impedance shall not change more than 20% | Stored at 90%~95% RH at 602 for 1000 h. |
| Bending strength | No visible mechanical damage. | Test substrate bend down 2 mm at a rate of (10.5) mm/s, hold for 5 s. |
| Solvent Resistance | Impedance shall not change more than 20% | Soaked in isopropyl alcohol solution at 235 for 50.5 min. |
Available in Tape & Reel packaging.
Recommended for reflow soldering. Use rosin-based flux (halide content < 0.2%) and lead-free solder (96.5Sn/3.0Ag/0.5Cu). Temperature difference between solder and ferrite surface should not exceed 150 during pre-heating and 100 during cooling.
Manual Soldering: Iron temperature: 350 (Max), Power: 30W (Max), Time: < 5S.
The company does not use ODS such as CCl4 (Carbon Tetrachloride) and HCFC in its production process.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!