Beijing Silk Road Enterprise Management Services Co., Ltd.
| Insulation Resistance(IR) | 10MΩ |
| Operating Temperature | -40℃~+125℃ |
| DC Resistance(DCR) | 45mΩ |
| Voltage Rating - DC | 50V |
| Number of Lines | 2 |
| Description | 2Line Common Mode Choke Surface Mount 4.7x4.5x2mm 300Ω@100MHz 3A DCR 45mΩ |
| Mfr. Part # | ACM4520F-301T30 |
| Package | SMD-4P,4.7x4.5mm |
| Model Number | ACM4520F-301T30 |
View Detail Information
Explore similar products
Wire Wound Common Mode Choke Walsin WTCF2012Z0M221PB Ideal for USB Lines and
Wire Wound Chip Common Mode Coil CENKER CMC2012U-300-2P-T for Noise Suppression
Noise Suppression Coilank AACM2012T751W2 Common Mode Filter Compliant with AEC
Compact Common Mode Choke DDY WBA3225L201T-G-HF with Low DC Resistance and High
Product Specification
| Insulation Resistance(IR) | 10MΩ | Operating Temperature | -40℃~+125℃ |
| DC Resistance(DCR) | 45mΩ | Voltage Rating - DC | 50V |
| Number of Lines | 2 | Description | 2Line Common Mode Choke Surface Mount 4.7x4.5x2mm 300Ω@100MHz 3A DCR 45mΩ |
| Mfr. Part # | ACM4520F-301T30 | Package | SMD-4P,4.7x4.5mm |
| Model Number | ACM4520F-301T30 |
SMD Common Mode Line Filters designed for large current applications. These filters offer a low profile of 2.0 mm, making them optimal for surface mounting. They are suitable for use up to 2.0A and operate within a temperature range of -40~+125 (including self-temperature rise).
| Part Number | Common mode Impedance (@100MHz) | DCR (m) max. | IDC (A)max. | Rated Volt. (Vdc)max. | IR () min. | Marking |
| ACM4520F-900T32 | 60 Min 90 Typ | 35 | 3.2 | 50 | 10M | 900 |
| ACM4520F-151T31 | 90 Min 150 Typ | 40 | 3.1 | 50 | 10M | 151 |
| ACM4520F-231T30 | 180 Min 230 Typ | 45 | 3.0 | 50 | 10M | 231 |
| ACM4520F-301T30 | 200 Min 300 Typ | 45 | 3.0 | 50 | 10M | 301 |
| ACM4520F-401T25 | 300 Min 420 Typ | 50 | 2.5 | 50 | 10M | 401 |
| ACM4520F-701T22 | 500 Min 700 Typ | 59 | 2.2 | 50 | 10M | 701 |
| ACM4520F-901T21 | 650 Min 900 Typ | 68 | 2.1 | 50 | 10M | 901 |
| ACM4520F-102T21 | 800 Min 1000 Typ | 68 | 2.1 | 50 | 10M | 102 |
| ACM4520F-122T20 | 1000 Min 1200 Typ | 74 | 2.0 | 50 | 10M | 122 |
| ACM4520F-142T19 | 1200 Min 1400 Typ | 81 | 1.9 | 50 | 10M | 142 |
These filters are designed for various applications including:
| ITEM | Method Used | Specification & Requirement |
| Solderability | The surface of terminal/pin tested shall be covered with new solder by 95% | |
| Solder heat proof | Preheating: 180 10 90 seconds Soldering: 255 5 for 3 1 sec | Inductance change within 5% Without mechanical damage |
| Shock | Drop down with 981m/s2 (100G) shock Attitude upon a rubber block method shock testing machinem, 3 tests. | Inductance change within 5% Without mechanical damage |
| Vibration | Vibration frequency: 10Hz to 55Hz to 10Hz 60 seconds cycle Vibration time: 2 hours | Inductance change within 5% Without mechanical damage |
| Aging Reliability | Apply IDC current @ 85 ambient Duration: 1000 hrs | Inductance change within 5% Without mechanical damage |
| Humidity Resistance | Apply IDC current @ 60 ambient Humidity: 90~95 Duration: 1000 hrs | Inductance change within 5% Without mechanical damage |
| Low Temp. Storing | -25 2 for total 1,000 +4/-0 hours | Inductance change within 5% Without mechanical damage |
| Thermal Shock | -25, (30 mins) -> room temp. (5 mins) -> 100, (30 mins) -> room temp. (5 mins) 100 cycles | Inductance change within 5% Without mechanical damage |
| Heat Resistance | 100, (30 mins) -> room temp. (5 mins) 100 cycles | Inductance change within 5% Without mechanical damage |
| High Temp. Storing | 100 2 for total 1,000 +4/-0 hours | Inductance change within 5% Without mechanical damage |
| ITEM | Tape width | Distance | Pull-of force | Packing Quantity |
| 178mm reel | 12 mm | 8 mm | 10~120g | T type : 1000 pcs./reel |
Reflow
Use a solder iron of less than 30W when soldering, do not allow the soldering iron tip directly touch the ferrite body outside of terminal electrode.
5 seconds max. at 260.
| 60sec. Min. | 150sec Max. | 10sec. Max. | Natural cooling | |
| Temperature Profile | 150 | 217 | 255 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!