Beijing Silk Road Enterprise Management Services Co., Ltd.
| Insulation Resistance(IR) | 10MΩ |
| Operating Temperature | -25℃~+105℃ |
| DC Resistance(DCR) | 200mΩ |
| Voltage Rating - DC | 50V |
| Number of Lines | 2 |
| Description | 2Line Common Mode Choke Surface Mount-4P 3.2x4.5mm 1.4kΩ@100MHz 700mA DCR 200mΩ |
| Mfr. Part # | SRCM.4532.142TT00 |
| Package | SMD-4P,4.5x3.2mm |
| Model Number | SRCM.4532.142TT00 |
View Detail Information
Explore similar products
Wire Wound Common Mode Choke Walsin WTCF2012Z0M221PB Ideal for USB Lines and
Wire Wound Chip Common Mode Coil CENKER CMC2012U-300-2P-T for Noise Suppression
Noise Suppression Coilank AACM2012T751W2 Common Mode Filter Compliant with AEC
Compact Common Mode Choke DDY WBA3225L201T-G-HF with Low DC Resistance and High
Product Specification
| Insulation Resistance(IR) | 10MΩ | Operating Temperature | -25℃~+105℃ |
| DC Resistance(DCR) | 200mΩ | Voltage Rating - DC | 50V |
| Number of Lines | 2 | Description | 2Line Common Mode Choke Surface Mount-4P 3.2x4.5mm 1.4kΩ@100MHz 700mA DCR 200mΩ |
| Mfr. Part # | SRCM.4532.142TT00 | Package | SMD-4P,4.5x3.2mm |
| Model Number | SRCM.4532.142TT00 |
The class="lazy" src="/myres/images/load_icon.gif" data-originalM.4532.Series is a common-mode choke designed for noise suppression. It is manufactured by Shenzhen Sorvida Electronics Co., Ltd. and is suitable for various electronic applications requiring electromagnetic interference reduction.
| Part Number | Impedance ()25% | Test Freq. (MHz) | DCR Max. () | Rated Voltage Vdc (max.) | Irms (mA)(max.) | IR (M) min. | (mm) |
| class="lazy" src="/myres/images/load_icon.gif" data-originalM.4532.800TT00 | 80 | 100 | 0.05 | 50 | 3000 | 10 | A: 4.50.2, B: 3.20.2, C: 2.80.2, D: 1.0Typ, E: 1.2Typ |
| class="lazy" src="/myres/images/load_icon.gif" data-originalM.4532.900TT00 | 90 | 100 | 0.05 | 50 | 3000 | 10 | A: 4.50.2, B: 3.20.2, C: 2.80.2, D: 1.0Typ, E: 1.2Typ |
| class="lazy" src="/myres/images/load_icon.gif" data-originalM.4532.121TT00 | 120 | 100 | 0.10 | 50 | 3000 | 10 | A: 4.50.2, B: 3.20.2, C: 2.80.2, D: 1.0Typ, E: 1.2Typ |
| class="lazy" src="/myres/images/load_icon.gif" data-originalM.4532.221TT00 | 220 | 100 | 0.10 | 50 | 1300 | 10 | A: 4.50.2, B: 3.20.2, C: 2.80.2, D: 1.0Typ, E: 1.2Typ |
| class="lazy" src="/myres/images/load_icon.gif" data-originalM.4532.231TT00 | 230 | 100 | 0.10 | 50 | 1300 | 10 | A: 4.50.2, B: 3.20.2, C: 2.80.2, D: 1.0Typ, E: 1.2Typ |
| class="lazy" src="/myres/images/load_icon.gif" data-originalM.4532.601TT00 | 600 | 100 | 0.12 | 50 | 1500 | 10 | A: 4.50.2, B: 3.20.2, C: 2.80.2, D: 1.0Typ, E: 1.2Typ |
| class="lazy" src="/myres/images/load_icon.gif" data-originalM.4532.801TT00 | 800 | 100 | 0.16 | 50 | 1000 | 10 | A: 4.50.2, B: 3.20.2, C: 2.80.2, D: 1.0Typ, E: 1.2Typ |
| class="lazy" src="/myres/images/load_icon.gif" data-originalM.4532.102TT00 | 1000 | 100 | 0.18 | 50 | 1200 | 10 | A: 4.50.2, B: 3.20.2, C: 2.80.2, D: 1.0Typ, E: 1.2Typ |
| class="lazy" src="/myres/images/load_icon.gif" data-originalM.4532.142TT00 | 1400 | 100 | 0.20 | 50 | 700 | 10 | A: 4.50.2, B: 3.20.2, C: 2.80.2, D: 1.0Typ, E: 1.2Typ |
| NO. | Item | Specifications | Test Methods |
| 1 | Solder- Ability | More than 90% of termination should be covered with new solder. | Solder: Sn, Temperature: 255+5/-0, Flux: rosin, Duration: 3.50.5s |
| 1 | Leaching Resistance | More than 75% of termination Should be covered with new solder. | Solder: Sn, Temperature: 270+2/-0, Flux: rosin, Duration: 100.5s |
| 3 | Drop | No mechanical damage shall be noticed Impedance shall be within 20% of the initial value | Drop 10 times on a concrete floor from a height of 1m. |
| 4 | Vibration | - | Frequency: 10 to 55Hz, Amplitude: 1.52mm, Direction and time: X, Y and Z directions for 2 hours each. |
| 5 | Humidity resistance | a. Test condition: Temp. 405, Humidity: 90%~95%, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. | - |
| 6 | High temperature resistance | a. Test condition: Applied rated current, Temp. 855, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. | - |
| 7 | Low temperature resistance | No mechanical damage shall be noticed Impedance shall be within 20% of the initial value | a. Test condition: Temp. -405, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. |
| 8 | Thermal shock | a. Test condition: 1) Temp. -40, time: 303min 2) Temp. +85, time: 303min, 100 cycles b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. | - |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!