Beijing Silk Road Enterprise Management Services Co., Ltd.
| Impedance @ Frequency | 65Ω@10MHz;1kΩ@100MHz |
| Insulation Resistance(IR) | 10MΩ |
| Voltage Rating - DC | 60V |
| Current Rating | 40mA |
| Operating Temperature | -40℃~+125℃ |
| Voltage Withstand | 150V |
| Description | SMD-4P,4x4mm Common Mode Chokes RoHS |
| Mfr. Part # | YLM4015A-102T |
| Package | SMD-4P,4x4mm |
| Model Number | YLM4015A-102T |
View Detail Information
Explore similar products
Wire Wound Common Mode Choke Walsin WTCF2012Z0M221PB Ideal for USB Lines and
Wire Wound Chip Common Mode Coil CENKER CMC2012U-300-2P-T for Noise Suppression
Noise Suppression Coilank AACM2012T751W2 Common Mode Filter Compliant with AEC
Compact Common Mode Choke DDY WBA3225L201T-G-HF with Low DC Resistance and High
Product Specification
| Impedance @ Frequency | 65Ω@10MHz;1kΩ@100MHz | Insulation Resistance(IR) | 10MΩ |
| Voltage Rating - DC | 60V | Current Rating | 40mA |
| Operating Temperature | -40℃~+125℃ | Voltage Withstand | 150V |
| Description | SMD-4P,4x4mm Common Mode Chokes RoHS | Mfr. Part # | YLM4015A-102T |
| Package | SMD-4P,4x4mm | Model Number | YLM4015A-102T |
The YLM4015 Series Wire Wound Common Mode Choke is a compact and highly effective filter designed for noise suppression. It features high common mode impedance at noise frequencies and low differential mode impedance at signal frequencies, ensuring minimal distortion for high-speed video signal transmission. This choke is suitable for DC power line noise suppression, Switch Mode Power Supplies, Variable Frequency Drives, and AC/DC power rectifiers, operating within a temperature range of -40 to +125.
| Part Number | Impedance () at 10MHz (40%) | Impedance () at 100MHz (Typ.) | Common Mode DCR () Max. | DC Current (A) Typ. | Rated Voltage (Vdc) Typ. | Insulation Resistance (M) Min. | Withstand Voltage (Vdc) Typ. |
| YLM4015A-101T | 10 | 100 | 0.016 | 3.1 | 60 | 10 | 150 |
| YLM4015A-251T | 25 | 250 | 0.024 | 2.6 | 60 | 10 | 150 |
| YLM4015A-401T | 38 | 400 | 0.030 | 2.1 | 60 | 10 | 150 |
| YLM4015A-501T | 50 | 500 | 0.030 | 2.1 | 60 | 10 | 150 |
| YLM4015A-601T | 53 | 600 | 0.030 | 2.0 | 60 | 10 | 150 |
| YLM4015A-851T | 65 | 850 | 0.040 | 1.9 | 60 | 10 | 150 |
| YLM4015A-102T | 65 | 1000 | 0.040 | 2.0 | 60 | 10 | 150 |
| YLM4015A-172T | 100 | 1700 | 0.060 | 1.5 | 60 | 10 | 150 |
| YLM4015A-242T | 120 | 2400 | 0.075 | 1.4 | 60 | 10 | 150 |
| YLM4015A-302T | 180 | 2200 | 0.120 | 1.1 | 60 | 10 | 150 |
| Item | Specifications | Test Method |
| Appearance and Dimensions | Style and Dimensions | Visual Inspection and Measured with Slide Calipers. |
| Bonding Strength and Core Strength | No Evidence of Chipping, Breakage. No Evidence of Coming off Glass-Epoxy Substrate. Applying Force (F): 10N Applying Time: 51s | |
| Body Strength | No Evidence of Chipping, Breakage. Applying Force (F): 10N Applying Time: 51s | |
| Vibration | Products Shall be Soldered on the Substrate. Oscillation Frequency: 10 to 55 to 10Hz for 1 Min. Total Amplitude: 1.5mm Testing Time: A Period of 2 Hours in Each of 3 Mutually Perpendicular Directions (Total 6 Hours). | |
| Drop | Products Shall be Dropped Concrete or Steel Board. Method: Free Fall Height: 1m The Number of Times: 10 Times | |
| Solderability | The electrodes Shall be at Least 90% Covered with New Solder coating. Flux: Ethanol Solution of Rosin, 25 (wt)% Pre-Heating: 15010, 1 Minute. Solder: (1) Sn/Pb=60/40, (2) Sn-3.0Ag-0.5Cu Solder Temperature: (1) 2305, (2) 2305 Immersion Time: 41s Immersion and Immersion Rates: 25mm/s | |
| Resistance to Soldering Heat | Meet Table 1. Flux: Ethanol Solution of Rosin, 25 (wt)% Pre-Heating: 15010, 1 Minute. Solder: (1) Sn/Pb=60/40, (2) Sn-3.0Ag-0.5Cu Solder Temperature: 2705 Immersion Time: 51s Immersion and Immersion Rates: 25mm/s Then Measured After Exposure in the Room Condition for 4 to 48 Hours. | |
| Temperature Cycle | Meet Table 1. 1 Cycle 1 step: -40 (+0, -3) / 30min (+3, -0) min 2 step: Ordinary Temp. / 3 min max. 3 step: +125 (+3, -0) / 30min (+3, -0) min 4 step: Ordinary Temp. / 3 min max. Total of 10 Cycles Then Measured After Exposure in the Room Condition for 4 to 48 Hours. | |
| Humidity | Temperature: 402 Humidity: 90 to 95% (RH) Time: 1000h (+48 h, -0 h) Then Measured After Exposure in the Room Condition for 4 to 48 Hours. | |
| Humidity Load | Temperature: 402 Humidity: 90 to 95% (RH) Test Voltage: Rated Voltage Time: 1000h (+48 h, -0 h) Then Measured After Exposure in the Room Condition for 4 to 48 Hours. (Ref. Item) | |
| Heat Life | Temperature: 852 Humidity: 90 to 95% (RH) Test Voltage: Rated Voltage Time: 1000h (+48 h, -0 h) Then Measured After Exposure in the Room Condition for 4 to 48 Hours. (Ref. Item) | |
| Cold Resistance | Temperature: -402 Time: 1000h (+48 h, -0 h) Then Measured After Exposure in the Room Condition for 4 to 48 Hours. (Ref. Item) |
| TYPE | A (mm) | B (mm) | C (mm) | Max. D (mm) | Typ. E (mm) |
| YLM4015 | 4.000.2 | 4.000.2 | 1.60 | 1.55 | 1.40 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!