Beijing Silk Road Enterprise Management Services Co., Ltd.
| Insulation Resistance(IR) | 10MΩ |
| DC Resistance(DCR) | 240mΩ |
| Voltage Rating - DC | 125V |
| Number of Lines | 2 |
| Description | 240mΩ 2 SMD Common Mode Chokes RoHS |
| Mfr. Part # | MGRC7060M701T-2-LF |
| Package | SMD |
| Model Number | MGRC7060M701T-2-LF |
View Detail Information
Explore similar products
Wire Wound Common Mode Choke Walsin WTCF2012Z0M221PB Ideal for USB Lines and
Wire Wound Chip Common Mode Coil CENKER CMC2012U-300-2P-T for Noise Suppression
Noise Suppression Coilank AACM2012T751W2 Common Mode Filter Compliant with AEC
Compact Common Mode Choke DDY WBA3225L201T-G-HF with Low DC Resistance and High
Product Specification
| Insulation Resistance(IR) | 10MΩ | DC Resistance(DCR) | 240mΩ |
| Voltage Rating - DC | 125V | Number of Lines | 2 |
| Description | 240mΩ 2 SMD Common Mode Chokes RoHS | Mfr. Part # | MGRC7060M701T-2-LF |
| Package | SMD | Model Number | MGRC7060M701T-2-LF |
The MGRC series of Common Mode Choke Coils are designed for effective noise suppression. These coils are manufactured by Shenzhen Microgate Technology Co., Ltd. and are lead-free compliant. They are suitable for various electronic applications requiring reliable common mode noise filtering.
| Part Number | Series | Dimensions (L x W) | Material Code | Impedance (min) @ 100MHz | DC Resistance (max) | Rated DC Current (max) | Insulation Voltage (min) | Cut-off Frequency (3dB Attenuation) | Packing Style | Number of Signal Lines |
|---|---|---|---|---|---|---|---|---|---|---|
| MGRC7060M701T-2-LF | MGRC | 7.0 x 6.0 mm | M701 | 700 | 0.24 | 5.0 A | 125 V | 500 MHz | T (Taping) | 2 |
| Dimension | Value |
|---|---|
| A | 7.0 0.5 |
| B | 6.0 0.5 |
| C | 3.5 0.3 |
| D | 3.5 (Typ) |
| E | 1.5 0.2 |
| F | 1.5 0.2 |
| G | 1.75 0.2 |
| A1 | 7.5 0.5 |
| NO. | Item | Specifications | Test Methods |
|---|---|---|---|
| 1 | Solder-Ability | It can be connected on the Recommendation soldering condition. Solder: Sn Temperature: 255 +5 / -0 Flux: rosin Duration: 3.50.5s | Recommendation soldering condition |
| 2 | Leaching Resistance | More than 75% of termination Should be covered with new solder. Solder: Sn Temperature: 270 +2 / -0 Flux: rosin Duration: 100.5s | |
| 3 | Terminal Strength | The terminal and body should be no damage | Solder a chip to test substrate, and then laterally apply a load 9.8N in the X, Y and Z directions |
| 4 | Bending Strength | No mechanical damage should be noticed | When the board curve to 2mm (0.079 inches) |
| 5 | Vibration | Frequency: 10 to 55Hz Amplitude: 1.52mm Direction and time :X, Y and Z directions for 2 hours each. | |
| 6 | Humidity resistance | a. Test condition Temp.: 852 Humidity: 90%~95% Test time: 50012 h | b. Measurement method: The component should be stabilized at normal condition for (242) hours before test. |
| 7 | High temperature resistance | a. Test condition Applied rated current. Temp.: 852 Test time: 50012 h | b. Measurement method: The component should be stabilized at normal condition for (242) hours before test. |
| 8 | Low temperature resistance | a. Test condition Temp.: -402 Test time: 50012 h | b. Measurement method: The component should be stabilized at normal condition for (242) hours before test. |
| 9 | Thermal shock (Temperature cycle) | 1. No mechanical damage shall be noticed 2. Impedance shall be within 20% of the initial value 3. Insulation resistance: >10 M DC | a. Test condition 1) Temp.: -40, time: 303min 2) Temp.: +85, time: 303min 100 cycles b. Measurement method: The component should be stabilized at normal condition for (242) hours before test. |
| Profile Feature | Value |
|---|---|
| Average Ramp-Up Rate (Tsmax to Tp) | 3 C/second max. |
| Preheat Temperature Min (Tsmin) | 150 C |
| Temperature Max (Tsmax) | 200 C |
| Time (tsmin to tsmax) | 60-180 seconds |
| Time maintained above: Temperature (TL) | 217 C |
| Time (tL) | 60-150 seconds |
| Peak/Classification Temperature (Tp) | 260 C |
| Peak/Classification Time (Tp) | 3-4 seconds |
| Time within 5 C of actual Peak Temperature (tp) | 20-40 seconds |
| Ramp-Down Rate | 6C/second max. |
| Time 25 C to Peak Temperature | 8 minutes max. |
Note 1: All temperatures refer to topside of the package, measured on the package body surface.
| Parameter | Condition |
|---|---|
| Pre-heating | 150, 1 minute |
| Tip temperature | 280 max |
| Soldering iron output | 30W max |
| End of soldering iron | 1mm max |
| Soldering time | 2 seconds max |
| Dimension | Value |
|---|---|
| A | 180 +0/-3 |
| B | 60 +1/-0 |
| C | 13.0 0.2 |
| D | 2.2 0.5 |
| W | 9.0 1.0 |
| t | 1.2 |
| R | 1.0 |
| Parameter | Value |
|---|---|
| Reel material | PS (Polystyrene) |
| Parameter | Value |
|---|---|
| Pulling strength of tapes (Carrier tape) | 10 N or more (1kgf or more) |
| Peeling strength of cover tape | 5 N or more (1kgf or more) |
Test condition: Temperature: 5~35 Humidity: 45~85%
| Reel Size | Type | Quantity |
|---|---|---|
| 180mm reel | T type | 1500 pcs/reel |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!