Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -40℃~+105℃ |
| Capacitance | 47uF |
| Height - Seated (Max) | 22mm |
| Pin Spacing | 7.5mm |
| Voltage Rating | 400V |
| Diameter | 16mm |
| Tolerance | ±20% |
| Description | 47uF 400V Aluminum Electrolytic Capacitors Through Hole,D16xL22mm |
| Mfr. Part # | RC400M470LO16*22TH-2A1Et |
| Package | Through Hole,D16xL22mm |
| Model Number | RC400M470LO16*22TH-2A1Et |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
Aluminum Electrolytic Capacitor Guangdong TOPAZ Elec Tech ECLJ0612270M080P00 for
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Product Specification
| Operating Temperature | -40℃~+105℃ | Capacitance | 47uF |
| Height - Seated (Max) | 22mm | Pin Spacing | 7.5mm |
| Voltage Rating | 400V | Diameter | 16mm |
| Tolerance | ±20% | Description | 47uF 400V Aluminum Electrolytic Capacitors Through Hole,D16xL22mm |
| Mfr. Part # | RC400M470LO16*22TH-2A1Et | Package | Through Hole,D16xL22mm |
| Model Number | RC400M470LO16*22TH-2A1Et |
The BERYL RC Series Aluminum Electrolytic Capacitors (foil type) are designed for use in electronic equipment, meeting IEC 60384 standards. These radial capacitors offer a capacitance of 47uF with a rated voltage of 400V and an operating temperature range of -40C to +105C. They are suitable for applications requiring a capacitance tolerance of 20% and a long life of 5000 hours at 105C.
| Series | Cap(uF) | WV(V) | Size(mm) (D x L) | Temperature (C) | Capacitance Tolerance | Life(hours) @105() | DF (%)(MAX) 120Hz/20 | LC(A)(MAX) 2min/20 | ESR()(MAX) 100KHz/25 | RC (mA rms) (MAX)105/100KHz | Surge voltage(V) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RC | 47 | 400 | 16 x 22 | -40~ +105 | 20% | 5000 | 20 | 386 | 1075 | 440 | 440 |
| Type | D | P | d | a (L< 20) | a (L20) | |
|---|---|---|---|---|---|---|
| 5, 6.3, 8, 10, 13, 16, 18, 22 | 2, 2.5, 3.5, 5, 5, 7.5, 7.5, 10 | 0.5, 0.5, 0.5/0.6, 0.6, 0.6, 0.8, 0.8, 0.8 | 1.5 | 2.0 | ||
RC 400 M 470 LO 16*22 TH-2A1 E t
Marking Sample:
Front: 400V 47uF RC(M) E105 2216
Reverse: BERYL
Marking Details:
| ITEM | PERFORMANCE | CONDITION | CRITERIA |
|---|---|---|---|
| Nominal capacitance (Tolerance) | Measuring Frequency: 120Hz12Hz, Measuring Voltage: Not more than 0.5Vrms +1.5~2.0V.DC, Measuring Temperature: 202 | Shall be within the specified capacitance tolerance. | |
| Leakage current | Connecting the capacitor with a protective resistor (1k10) in series for 2 minutes, and then, measure leakage current. | I (A) 0.02CV+10 (A) | |
| Dissipation factor | Nominal capacitance, for measuring frequency, voltage and temperature. | Must be within the parameters (See page 3). | |
| Impedance | Measuring frequency: 100kHz; Measuring temperature: 202; Measuring point: 2mm max. from the surface of a sealing rubber on the lead wire. | Must be within the parameters (See page 3). | |
| Load life test | Stored at a temperature of Maximum operating temperature 2C with DC bias voltage plus the rated ripple current for Rated life +48/0 hours. Tested after 16 hours recovering time. | Leakage current: Not more than the specified value. Capacitance Change: Within 20% of initial value. Dissipation Factor: Not more than 200% of the specified value. Appearance: No leakage of electrolyte. | |
| Shelf life test | Stored with no voltage applied at a temperature of Maximum operating temperature 2 for 1000+48/0 hours. Stabilized at room temperature for 16 hours. | Leakage current: Not more than 200% of the specified value. Capacitance Change: Within 20% of initial value. Dissipation Factor: Not more than 200% of the specified value. Appearance: No leakage of electrolyte. | |
| Maximum permissible (ripple current, temperature coefficient) | Maximum permissible ripple current is the maximum A.C current at 100kHz and can be applied at maximum operating temperature. | Frequency Multipliers provided. Temperature Coefficient factors provided. | |
| Terminal strength | Tensile strength and Bending strength of terminals. | No noticeable changes, no breakage or looseness at the terminal. | |
| Temperature characteristics | Testing at -40, +20, +105. Capacitance, DF, and impedance measured at 120Hz. | At +105: Capacitance within 25% of original. DF within limits. Leakage current 10 times specified value. At -40: Impedance (Z) ratio limits provided. In step 5 (return to +20): Capacitance within 10% of original. DF within limits. Leakage current specified value. | |
| Surge test | Applied a surge voltage for 305 seconds, repeated 1000 times. Tested after 1-2 hours under normal humidity. | Leakage current: Not more than the specified value. Capacitance Change: Within 15% of initial value. Dissipation Factor: Not more than the specified value. Appearance: No leakage of electrolyte. | |
| Change of temperature test | Temperature cycle: +20, Rated low temperature (-40/-25), Rated high temperature (+105) for 5 cycles. | Leakage current: Not more than the specified value. Dissipation Factor: Not more than the specified value. Appearance: No leakage of electrolyte. | |
| Damp heat test | Exposed for 5008 hours in an atmosphere of 90~95% RH at 402. | Leakage current: Not more than the specified value. Capacitance Change: Within 10% of initial value. Dissipation Factor: Not more than 120% of the specified value. Appearance: No leakage of electrolyte. | |
| Solderability test | Soldering temperature: 2455, Dipping depth: 2mm, Dipping speed: 252.5mm/s, Dipping time: 30.5s. | Soldering wetting time: Less than 3s. Coating quality: A minimum of 95% of the surface being immersed. | |
| Vibration test | 10Hz ~ 55Hz, peak amplitude 1.5mm, for 2 hours in each of 3 mutually perpendicular directions. | Inner construction: No intermittent contacts, open or short circuiting. No damage of tab terminals or electrodes. Appearance: No mechanical damage in terminal. No leakage of electrolyte or swelling of the case. Markings shall be legible. | |
| Resistance to solder heat test | Terminals immersed into solder bath at 2605 for 101 seconds or 40010 for 3+0/-1 seconds to 1.5~2.0 mm from the body. Tested after 1~2 hours under normal temperature and humidity. | Leakage current: Not more than the specified value. Capacitance Change: Within 5% of initial value. Dissipation Factor: Not more than the specified value. Appearance: No leakage of electrolyte. | |
| Vent test | Applies to products with vent (diameter 6.3mm). DC test with reversed polarity and selected DC current. | The vent shall operate with no dangerous conditions such as flames or dispersion of pieces of the capacitor and/or case. |
Packing Label Marked:
Packing Types: Bulk Packing, Taped Packing, Outer box.
The products are warranted to be free from the following substances:
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!