Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -40℃~+105℃ |
| Lifetime | - |
| Capacitance | 1000uF |
| Height - Seated (Max) | 16mm |
| Pin Spacing | 3.5mm |
| Voltage Rating | 16V |
| Diameter | 8mm |
| Equivalent Series Resistance(ESR) | - |
| Tolerance | ±20% |
| Ripple Current | - |
| Description | 1000uF 16V Aluminum Electrolytic Capacitors Through Hole,D8xL16mm |
| Mfr. Part # | RC016M102LO8*16TH-2A1Et |
| Package | Through Hole,D8xL16mm |
| Model Number | RC016M102LO8*16TH-2A1Et |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
Aluminum Electrolytic Capacitor Guangdong TOPAZ Elec Tech ECLJ0612270M080P00 for
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Product Specification
| Operating Temperature | -40℃~+105℃ | Lifetime | - |
| Capacitance | 1000uF | Height - Seated (Max) | 16mm |
| Pin Spacing | 3.5mm | Voltage Rating | 16V |
| Diameter | 8mm | Equivalent Series Resistance(ESR) | - |
| Tolerance | ±20% | Ripple Current | - |
| Description | 1000uF 16V Aluminum Electrolytic Capacitors Through Hole,D8xL16mm | Mfr. Part # | RC016M102LO8*16TH-2A1Et |
| Package | Through Hole,D8xL16mm | Model Number | RC016M102LO8*16TH-2A1Et |
The Beryl RC series of Aluminum Electrolytic Capacitors (foil type) are designed for use in electronic equipment, meeting IEC 60384 standards. These radial capacitors offer a capacitance of 1000F and a rated voltage of 16V, operating within a temperature range of -40C to +105C. They are engineered for reliability with a rated life of 2000 hours at 105C.
| Series | Capacitance (F) | Rated Voltage (V) | Size (mm) D x L | Temperature (C) | Capacitance Tolerance | Life (hours) @105C | Dissipation Factor (%) MAX (120Hz/20) | Leakage Current (A) MAX (2min/20) | ESR () MAX (100KHz/25) | Ripple Current (mA rms) MAX (105/100KHz) | Surge Voltage (V) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RC | 1000 | 16 | 8 x 16 | -40~+105 | 20% | 2000 | 16 | 160 | 0.07 | 920 | 18 |
| Type | D (mm) | P (mm) | d (mm) | a (mm) |
|---|---|---|---|---|
| 5 | 5 | 2 | 0.5 | 1.5 (L<20) / 2.0 (L20) |
| 6.3 | 6.3 | 2.5 | 0.5 | 1.5 (L<20) / 2.0 (L20) |
| 8 | 8 | 3.5 | 0.5/0.6 | 1.5 (L<20) / 2.0 (L20) |
| 10 | 10 | 5 | 0.6 | 1.5 (L<20) / 2.0 (L20) |
| 13 | 13 | 5 | 0.6 | 1.5 (L<20) / 2.0 (L20) |
| 16 | 16 | 7.5 | 0.8 | 1.5 (L<20) / 2.0 (L20) |
| 18 | 18 | 7.5 | 0.8 | 1.5 (L<20) / 2.0 (L20) |
| 22 | 22 | 10 | 0.8 | 1.5 (L<20) / 2.0 (L20) |
RC 016 M 102 LO 8*16 TH-2 A1 E t
Capacitors are marked with the following items:
| Item | Performance | Condition |
|---|---|---|
| Nominal Capacitance | Within specified tolerance | 120Hz12Hz, 0.5Vrms +1.5~2.0V.DC, 202 |
| Leakage Current | 0.01CV or 3 A, whichever is greater | 1k10 protective resistor, 2 minutes |
| Dissipation Factor | Within parameters (See page 3) | Nominal capacitance, specified frequency, voltage, and temperature |
| Impedance | Within parameters (See page 3) | 100kHz, 202, 2mm max. from sealing rubber |
| Load Life Test | Leakage current: Not more than specified value. Capacitance Change: Within 20% of initial value. Dissipation Factor: Not more than 200% of specified value. Appearance: No electrolyte leakage. | Max operating temp. 2C, DC bias voltage + rated ripple current for Rated life +48/0 hours. Tested after 16 hours recovery. |
| Shelf Life Test | Leakage current: Not more than 200% of specified value. Capacitance Change: Within 20% of initial value. Dissipation Factor: Not more than 200% of specified value. Appearance: No electrolyte leakage. | No voltage applied, Max operating temp. 2C for 1000+48/0 hours. Tested after 16 hours stabilization. |
| Maximum Permissible Ripple Current | Refer to Table-3 for frequency multipliers. | 100kHz, max operating temperature. Combined DC and peak AC voltage shall not exceed rated voltage. |
| Terminal Strength | No noticeable changes, breakage, or looseness. | Tensile and bending tests applied to terminals. |
| Temperature Characteristics | Capacitance change within 25% at +105, 10% at +20 (step 5). DF within limits. Leakage current within limits. Impedance ratio at -40 compared to +20 specified in table. | Tests at 202, -40, +105. Capacitance, DF, Impedance measured at 120Hz. |
| Surge Test | Leakage current: Not more than specified value. Capacitance Change: Within 15% of initial value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. | Surge voltage applied for 305 sec. every 50.5 min for 1000 cycles. Tested after 1-2 hours recovery. |
| Change of Temperature Test | Leakage current: Not more than specified value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. | 5 temperature cycles (-40 to +105). |
| Damp Heat Test | Leakage current: Not more than specified value. Capacitance Change: Within 10% of initial value. Dissipation Factor: Not more than 120% of specified value. Appearance: No electrolyte leakage. | 90~95% RH at 402 for 5008 hours. |
| Solderability Test | Soldering wetting time: Less than 3s. Coating quality: Min 95% of immersed surface. | 2455, 2mm dipping depth, 252.5mm/s dipping speed, 30.5s dipping time. |
| Vibration Test | Inner construction: No intermittent contacts, open or short circuiting. No damage of tab terminals or electrodes. Appearance: No mechanical damage, no electrolyte leakage or swelling. Markings legible. | 10Hz ~ 55Hz, 1.5mm peak amplitude for 2 hours in 3 directions. Mounting with bracket if required. |
| Resistance to Solder Heat Test | Leakage current: Not more than specified value. Capacitance Change: Within 5% of initial value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. | 2605 for 101s or 40010 for 3+0/-1s, 1.5~2.0mm from body. Tested after 1-2 hours recovery. |
| Vent Test | Vent operates with no dangerous conditions (flames, dispersion of pieces). | DC test with reversed polarity and selected current from Table 2. Applicable to products with vent (diameter 6.3mm). |
Labels on inside boxes or bags include:
Packing types include Bulk Packing, Taped Packing, and Outer box with labels.
The company certifies that products are free from Cadmium, Lead, Mercury, Hexavalent chromium compounds, Organic chlorin compounds, Organic bromine compounds, Tributyltin compounds, Triphenyltin compounds, Asbestos, Specific azo compounds, Formaldehyde, Polyvinyl chloride (PVC) and PVC blends, as per RoHS or Sony-SS-00259 standards.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!