Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -40℃~+105℃ |
| Capacitance | 3.3uF |
| Height - Seated (Max) | 9mm |
| Voltage Rating | 400V |
| Pin Spacing | 3.5mm |
| Diameter | 8mm |
| Tolerance | ±20% |
| Description | 3.3uF 400V Aluminum Electrolytic Capacitors Through Hole,D8xL9mm |
| Mfr. Part # | RD400M3R3LO8*9TH-2B2Et |
| Package | Through Hole,D8xL9mm |
| Model Number | RD400M3R3LO8*9TH-2B2Et |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
Aluminum Electrolytic Capacitor Guangdong TOPAZ Elec Tech ECLJ0612270M080P00 for
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Product Specification
| Operating Temperature | -40℃~+105℃ | Capacitance | 3.3uF |
| Height - Seated (Max) | 9mm | Voltage Rating | 400V |
| Pin Spacing | 3.5mm | Diameter | 8mm |
| Tolerance | ±20% | Description | 3.3uF 400V Aluminum Electrolytic Capacitors Through Hole,D8xL9mm |
| Mfr. Part # | RD400M3R3LO8*9TH-2B2Et | Package | Through Hole,D8xL9mm |
| Model Number | RD400M3R3LO8*9TH-2B2Et |
This specification sheet details the BERYL RD Series Aluminum Electrolytic Capacitors, specifically the 3.3uF/400V, 8*9 model. Designed for use in electronic equipment, these foil-type capacitors meet IEC 60384 standards. They offer a capacitance tolerance of 20% and a rated operating temperature range of -40 to +105. Key characteristics include a leakage current of 36A (max) and an ESR of 0.085 (max) at 100KHz/25. These capacitors are built with high-quality materials including aluminum anode and cathode foils, and a PET sleeve.
| Series | Capacitance (uF) | Rated Voltage (V) | Size (mm) D x L | Temperature Range (C) | Capacitance Tolerance | Life (hours) @105C | DF (%) (MAX) @120Hz/20C | LC (A) (MAX) 2min/20C | ESR () (MAX) @100KHz/25C | RC (mA rms) (MAX) @105C/120Hz | Surge Voltage (V) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RD | 3.3 | 400 | 8 x 9 | -40~+105 | 20% | 8000 | 24 | 36 | 0.085 | 440 | - |
| Type | D | P | d | a (L<20) | a (L20) |
|---|---|---|---|---|---|
| 5 | 5 | 2 | 0.5 | 1.5 | 2.0 |
| 6.3 | 6.3 | 2.5 | 0.5 | ||
| 8 | 8 | 3.5 | 0.5/0.6 | ||
| 10 | 10 | 5 | 0.6 | ||
| 13 | 13 | 5 | 0.6 | ||
| 16 | 16 | 7.5 | 0.8 | ||
| 18 | 18 | 7.5 | 0.8 | ||
| 22 | 22 | 10 | 0.8 |
RD 400 M 3R3 LO 8*9 TH-2B2 E t
Front Marking Sample: 3.3uF RD(M) 2216
Reverse Marking Sample: 400V
| Item | Performance | Condition | Criteria |
|---|---|---|---|
| Nominal Capacitance | Capacitance (Tolerance) | 120Hz12Hz, Not more than 0.5Vrms +1.5~2.0V.DC, 202 | Shall be within the specified capacitance tolerance. |
| Leakage Current | I (A) | Connected with a protective resistor (1k10) in series for 2 minutes. | I (A) 0.02CV+10(A) |
| Dissipation Factor | DF (%) | Nominal capacitance, specified frequency, voltage and temperature. | Must be within the parameters (See page 3). |
| Impedance | Z () | 100kHz, 202, Measuring point: 2mm max. from the surface of a sealing rubber on the lead wire. | Must be within the parameters (See page 3). |
| Load Life Test | Various characteristics | IEC60384-4 No. 4.13 methods, Max operating temp 2C, DC bias voltage + rated ripple current for Rated life +48/0 hours. Tested after 16 hours recovery. | Leakage current: Not more than specified value. Capacitance Change: Within 20% of initial value. Dissipation Factor: Not more than 200% of specified value. Appearance: No electrolyte leakage. |
| Shelf Life Test | Leakage current, Capacitance Change, Dissipation Factor, Appearance | Stored with no voltage applied at Max operating temp 2 for 1000+48/0 hours. Stabilized at room temp for 16 hours. | Leakage current: Not more than 200% of specified value. Capacitance Change: Within 20% of initial value. Dissipation Factor: Not more than 200% of specified value. Appearance: No electrolyte leakage. |
| Maximum Permissible Ripple Current | RC (mA rms) | Maximum A.C current at 120Hz and maximum operating temperature. | Refer to Table-3 (Frequency Multipliers). |
| Terminal Strength | Tensile & Bending Strength | Applied force to terminals for specified time. | No noticeable changes, breakage, or looseness at the terminal. |
| Temperature Characteristics | Capacitance, DF, Impedance | Various temperatures (-40 to +105). Measured at 120Hz. | See detailed criteria on page 8. |
| Surge Test | Leakage current, Capacitance Change, Dissipation Factor, Appearance | Applied surge voltage with a resistor for 305 seconds, repeated 1000 times. Tested after 1-2 hours recovery. | Leakage current: Not more than specified value. Capacitance Change: Within 15% of initial value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. |
| Change of Temperature Test | Leakage current, Dissipation Factor, Appearance | IEC60384-4 No.4.7 methods, 5 cycles of temperature changes (+20, -40/-25, +105). | Leakage current: Not more than specified value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. |
| Damp Heat Test | Leakage current, Capacitance Change, Dissipation Factor, Appearance | IEC60384-4 No.4.12 methods, 90~95% RH at 402 for 5008 hours. | Leakage current: Not more than specified value. Capacitance Change: Within 10% of initial value. Dissipation Factor: Not more than 120% of specified value. Appearance: No electrolyte leakage. |
| Solderability Test | Soldering wetting time, Coating quality | Soldering temp: 2455, Dipping depth: 2mm, Speed: 252.5mm/s, Time: 30.5s. | Wetting time: Less than 3s. Coating quality: Min 95% of immersed surface. |
| Vibration Test | Inner construction, Appearance, Markings | 10Hz ~ 55Hz, peak amplitude 1.5mm, for 2 hours in 3 perpendicular directions. | No intermittent contacts, open/short circuit, damage, leakage, or swelling. Markings legible. |
| Resistance to Solder Heat Test | Leakage current, Capacitance Change, Dissipation Factor, Appearance | Solder bath at 2605 for 101s or 40010 for 3+0/-1s, 1.5~2.0 mm from body. Tested after 1-2 hours recovery. | Leakage current: Not more than specified value. Capacitance Change: Within 5% of initial value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. |
| Vent Test | Operation of vent | DC test with reversed polarity and selected current (Table 2). Applies to products with vent (diameter 6.3mm). | Vent operates with no dangerous conditions (flames, dispersion of pieces). |
Packing Label Items: Clint order number, Client part number, Beryl part number, Capacitance, Voltage, Dimension, Packaging quantity, Capacitance tolerance, QC Marking, Lot number, Series.
Packing Types: Bulk Packing, Taped Packing, Outer box.
This product is warranted to be free from the following substances as per RoHS or Sony-SS-00259:
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!