Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -25℃~+105℃ |
| Capacitance | 4.7uF |
| Height - Seated (Max) | 11mm |
| Voltage Rating | 400V |
| Diameter | 8mm |
| Tolerance | ±20% |
| Description | 4.7uF 400V Aluminum Electrolytic Capacitors Through Hole,D8xL11mm |
| Mfr. Part # | ME400M4R7LO8*11TA-1B3EtHW1 |
| Package | Through Hole,D8xL11mm |
| Model Number | ME400M4R7LO8*11TA-1B3EtHW1 |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
Aluminum Electrolytic Capacitor Guangdong TOPAZ Elec Tech ECLJ0612270M080P00 for
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Product Specification
| Operating Temperature | -25℃~+105℃ | Capacitance | 4.7uF |
| Height - Seated (Max) | 11mm | Voltage Rating | 400V |
| Diameter | 8mm | Tolerance | ±20% |
| Description | 4.7uF 400V Aluminum Electrolytic Capacitors Through Hole,D8xL11mm | Mfr. Part # | ME400M4R7LO8*11TA-1B3EtHW1 |
| Package | Through Hole,D8xL11mm | Model Number | ME400M4R7LO8*11TA-1B3EtHW1 |
The BERYL SERIES ME radial aluminum electrolytic capacitors are designed for use in electronic equipment. These foil-type capacitors meet IEC 60384 standards and are suitable for applications requiring a capacitance of 4.7uF at a working voltage of 400V. They offer a wide operating temperature range of -40C to +105C and a rated life of 2000 hours at 105C.
| Series | Capacitance (uF) | Rated Voltage (WV) | Size (mm) (D x L) | Temperature (C) | Capacitance Tolerance | Life (hours) @105C | DF (%) (MAX) @120Hz/20C | LC (A) (MAX) 2min/20C | ESR () (MAX) @100KHz/25C | RC (mA rms) (MAX) @105C/120Hz | Surge Voltage (V) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ME | 4.7 | 400 | 8 x 11 | -40 ~ +105 | 20% | 2000 | 24 | 48 | - | 46 | 440 |
| Type | D (mm) | P (mm) | d (mm) | L (Max) |
|---|---|---|---|---|
| ME | 8 | 3.5 | 0.5 | 12mm |
ME 400 M 4R7 LO 8*11 TA-1B3 E t H W1
400V 4.7uF ME(M) 2340
| Item | Condition | Criteria |
|---|---|---|
| Nominal Capacitance | 120Hz12Hz, 0.5Vrms +1.5~2.0V.DC, 202 | Within specified capacitance tolerance. |
| Leakage Current | Connected with 1k10 resistor for 2 minutes. | 0.02CV+10(A) |
| Dissipation Factor | Nominal capacitance, specified frequency, voltage and temperature. | Must be within parameters (See page 3). |
| Impedance | 100kHz, 202, 2mm max. from sealing rubber. | Must be within parameters (See page 3). |
| Load Life Test | IEC60384-4 No. 4.13, Max operating temp 2C, Rated life +48/0 hours. | Leakage current: Not more than specified. Capacitance Change: Within 20% of initial. DF: Not more than 200% of specified. Appearance: No electrolyte leakage. |
| Shelf Life Test | No voltage applied, Max operating temp 2 for 1000+48/0 hours. | Leakage current: Not more than 200% of specified. Capacitance Change: Within 20% of initial. DF: Not more than 200% of specified. Appearance: No electrolyte leakage. |
| Maximum Permissible Ripple Current | 120Hz, Max operating temperature. | Refer to Table-3 for frequency multipliers. |
| Terminal Strength | Tensile and bending force applied to terminals. | No noticeable changes, breakage, or looseness. |
| Temperature Characteristics | Tests at -40C, +20C, +105C. | Capacitance, DF, and impedance within specified limits. |
| Surge Test | Simulates over voltage conditions. | Leakage current: Not more than specified. Capacitance Change: Within 15% of initial. DF: Not more than specified. Appearance: No electrolyte leakage. |
| Change of Temperature Test | Temperature cycling per IEC60384-4 No.4.7. | Leakage current, DF, and Appearance within specified limits. |
| Damp Heat Test | 90~95% RH at 402 for 5008 hours. | Leakage current: Not more than specified. Capacitance Change: Within 10% of initial. DF: Not more than 120% of specified. Appearance: No electrolyte leakage. |
| Solderability Test | Soldering temp 2455, Dipping depth 2mm, time 30.5s. | Soldering wetting time < 3s. Coating quality 95% wetting. |
| Vibration Test | 10Hz ~ 55Hz, 1.5mm peak amplitude. | No intermittent contacts, open/short circuits, or mechanical damage. Markings legible. |
| Resistance to Solder Heat Test | Solder bath at 2605 for 101s or 40010 for 3+0/-1s. | Leakage current: Not more than specified. Capacitance Change: Within 5% of initial. DF: Not more than specified. Appearance: No electrolyte leakage. |
| Vent Test | Applies to vented products (diameter 6.3mm). DC test with reversed polarity. | Vent operates without dangerous conditions. |
Packing labels include: Clint order number, Client part number, Beryl part number, Capacitance, Voltage, Dimension, Packaging quantity, Capacitance tolerance, QC Marking, Lot number, Series.
The products are warranted to be free from Cadmium, Lead, Mercury, Hexavalent chromium, Organic chlorin compounds, Organic bromine compounds, Tributyltin compounds, Triphenyltin compounds, Asbestos, Specific azo compounds, Formaldehyde, Polyvinyl chloride (PVC) and PVC blends, F, Cl, Br, I, REACH compliant.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!