Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -40℃~+105℃ |
| Capacitance | 330uF |
| Height - Seated (Max) | 20mm |
| Voltage Rating | 63V |
| Diameter | 10mm |
| Tolerance | ±20% |
| Description | 330uF 63V Aluminum Electrolytic Capacitors Through Hole,D10xL20mm |
| Mfr. Part # | RG063M331LO10*20TA-1A1Et |
| Package | Through Hole,D10xL20mm |
| Model Number | RG063M331LO10*20TA-1A1Et |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
Aluminum Electrolytic Capacitor Guangdong TOPAZ Elec Tech ECLJ0612270M080P00 for
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Product Specification
| Operating Temperature | -40℃~+105℃ | Capacitance | 330uF |
| Height - Seated (Max) | 20mm | Voltage Rating | 63V |
| Diameter | 10mm | Tolerance | ±20% |
| Description | 330uF 63V Aluminum Electrolytic Capacitors Through Hole,D10xL20mm | Mfr. Part # | RG063M331LO10*20TA-1A1Et |
| Package | Through Hole,D10xL20mm | Model Number | RG063M331LO10*20TA-1A1Et |
The BERYL RG series of Aluminum Electrolytic Capacitors (foil type) are designed for use in electronic equipment, meeting IEC 60384 standards. These radial capacitors offer a capacitance of 330uF with a rated voltage of 63V, featuring a temperature range of -40C to +105C and a life expectancy of 8000 hours at 105C. They are suitable for applications requiring reliable performance and durability.
| Series | Capacitance (uF) | Rated Voltage (V) | Size (mm) D x L | Temperature (C) | Capacitance Tolerance | Life (hours) @105C | Leakage Current (A) MAX (2min/20C) | ESR () MAX (100KHz/25C) | Ripple Current (mA rms) MAX (105C/100KHz) | Surge Voltage (V) |
|---|---|---|---|---|---|---|---|---|---|---|
| RG | 330 | 63 | 10 x 20 | -40~+105 | 20% | 8000 | 208 | 0.23 | 1305 | 72 |
| Type | D | P | d | a (L<20) | a (L20) |
|---|---|---|---|---|---|
| 5 | 2 | 0.5 | 1.5 | 2.0 | N/A |
| 6.3 | 2.5 | 0.5 | 1.5 | 2.0 | N/A |
| 8 | 3.5 | 0.5/0.6 | 1.5 | 2.0 | N/A |
| 10 | 5 | 0.6 | 1.5 | 2.0 | N/A |
| 13 | 5 | 0.6 | 1.5 | 2.0 | N/A |
| 16 | 7.5 | 0.8 | 1.5 | 2.0 | N/A |
| 18 | 7.5 | 0.8 | 1.5 | 2.0 | N/A |
| 22 | 10 | 0.8 | 1.5 | 2.0 | N/A |
RG 063 M 331 LO 10*20 TA-1A1 E t
Front: 63V 330uF RG(M)
Reverse: 2246
| Item | Performance | Condition | Criteria |
|---|---|---|---|
| 1. Nominal Capacitance | Capacitance (Tolerance) | 120Hz12Hz, Not more than 0.5Vrms +1.5~2.0V.DC, 202 | Shall be within the specified capacitance tolerance. |
| 2. Leakage Current | Leakage Current (A) | Connected with a protective resistor (1k10) in series for 2 minutes | I (A) 0.01CV or 3 (A) whichever is greater |
| 3. Dissipation Factor | DF (%) (MAX) 120Hz/20 | Nominal capacitance, measuring frequency, voltage and temperature | Must be within the parameters (See page 3) |
| 4. Impedance | ESR () (MAX) 100KHz/25 | Measuring frequency: 100kHz; Measuring temperature: 202; Measuring point: 2mm max. from the surface of a sealing rubber on the lead wire. | Must be within the parameters (See page 3) |
| 5. Load Life Test | Various characteristics | Max operating temp 2C with DC bias voltage plus rated ripple current for Rated life +48/0 hours. Recovering time 16 hours. | Leakage current: Not more than specified. Capacitance Change: Within 25%. Dissipation Factor: Not more than 200%. Appearance: No electrolyte leakage. |
| 6. Shelf Life Test | Various characteristics | Stored with no voltage applied at Max operating temp 2C for 1000+48/0 hours. Stabilized at room temperature for 16 hours. | Leakage current: Not more than specified. Capacitance Change: Within 25%. Dissipation Factor: Not more than 200%. Appearance: No electrolyte leakage. |
| 7. Maximum Permissible (Ripple Current, Temperature Coefficient) | Maximum permissible ripple current | 100kHz and at maximum operating temperature. | See Table-3 for frequency multipliers. |
| 8. Terminal Strength | Tensile and Bending strength of terminals | Applied force to terminal in lead out direction (30s); Bent terminal (90 twice). | No noticeable changes, breakage or looseness at the terminal. |
| 9. Temperature Characteristics | Capacitance, DF, Impedance | Testing at -40C, +20C, +105C. Measured at 120Hz. | See detailed criteria for each temperature step. |
| 10. Surge Test | Various characteristics | Applied surge voltage with (100 50)/CR (k) resistor in series for 305 seconds, repeated 1000 times. Recovering time 1-2 hours. | Leakage current: Not more than specified. Capacitance Change: Within 15%. Dissipation Factor: Not more than specified. Appearance: No electrolyte leakage. |
| 11. Change of Temperature Test | Various characteristics | Temperature cycle: +20C (3 min), -40C (302 min), +105C (302 min). Total 5 cycles. | Leakage current: Not more than specified. Dissipation Factor: Not more than specified. Appearance: No electrolyte leakage. |
| 12. Damp Heat Test | Various characteristics | 90~95% RH at 402C for 5008 hours. | Leakage current: Not more than specified. Capacitance Change: Within 10%. Dissipation Factor: Not more than 120%. Appearance: No electrolyte leakage. |
| 13. Solderability Test | Soldering wetting time, Coating quality | Soldering temperature: 2455C; Dipping depth: 2mm; Dipping speed: 252.5mm/s; Dipping time: 30.5s. | Soldering wetting time: Less than 3s. Coating quality: A minimum of 95% of the surface immersed. |
| 14. Vibration Test | Inner construction, Appearance | 10Hz ~ 55Hz, peak amplitude 1.5mm, for 2 hours in each 3 directions. | No intermittent contacts, open/short circuiting, damage. Markings legible. |
| 15. Resistance to Solder Heat Test | Various characteristics | Solder bath at 2605C for 101 seconds or 40010C for 3+0/-1 seconds, 1.5~2.0 mm from body. Recovering time 1~2 hours. | Leakage current: Not more than specified. Capacitance Change: Within 5%. Dissipation Factor: Not more than specified. Appearance: No electrolyte leakage. |
| 16. Vent Test | Vent operation | DC test with reversed polarity. Current selected from Table 2. Applies to products with vent, diameter 6.3mm. | Vent shall operate with no dangerous conditions. |
Label Marking: Clint order number, Client part number, Beryl part number, Capacitance, Voltage, Dimension, Packaging quantity, Capacitance tolerance, QC Marking, Lot number, Series.
Packing Types: Bulk Packing, Taped Packing.
The products are warranted to be free from the following substances as per RoHS or Sony-SS-00259 standards: Cadmium, Lead, Mercury, Hexavalent chromium, Organic chlorin compounds, PCB, PCN, PCT, Chlorinated paraffins, Other chlorinated organic compounds, Polybrominated biphenyls (PBB), Polybrominated diphenylethers (PBDE), Other brominated organic compounds, Tributyltin compounds, Triphenyltin compounds, Asbestos, Specific azo compounds, Formaldehyde, Polyvinyl chloride (PVC) and PVC blends. Also compliant with REACH for F, Cl, Br, I.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!